Needle files are used in applications where the surface finish takes priority over fast stock removal rates and are most suited for smaller workpieces. They are often used by engineers and model makers where precision is required. Each s...

Carbon chrome steel hardened and tempered with rust preventative finish and dipped in rust preventative oil. Manufactured in accordance with BS498 : 1990...

Ideal for deburring and filing angles and internal corners. Also for filing of holes and large fillets as well as concave surfaces. Its tapered surfaces make it well suited for flat filing. Shape : Equilateral triangle, tapered towards t...

High carbon steel second cut rasp file with moulded plastic handle....

For the cleaning of files, etc. Filled with file card steel wire 360 points per square inch. Brush width 25mm. Filled Length : 90mm. Beechwood handle....

Expert Quality set, chromium plated and diamond coated 150 grit. Moulded plastic handles. Display packed in plastic case. Contents : flat parallel, flat tapered, round, half round, square, three square, oval, crossing, barrette an...

For filing circular openings or concave surfaces. Tapered slightly towards the point. Size 150mm (6in) Cut : round bastard. Tanged. ...

For filing circular openings or concave surfaces. Tapered slightly towards the point. Size 100mm (4in) Cut : round bastard. Tanged. ...

A small rectangular slender file with edges tapered to a point. Both faces double cut for locksmithing and other precision work. Size 150mm (6in) Cut : warding bastard. Tanged ...

Double cut teeth for filing slots, keyways, grooves, rectangular holes, internal corners and for fine-adjustment of cutting tools. Slightly tapered towards tip for surface filing. Size 250mm (10in) Cut : square smooth. ...

A small rectangular slender file with edges tapered to a point. Both faces double cut for locksmithing and other precision work. Size 200mm (8in) Cut : warding bastard. Tanged. ...

For the same jobs as the hand file 100, but is sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and ...

Tapered half round cross section allows use on convex and concave surfaces. Suitable for deburring work. The edges and surfaces are tapered towards the point. Double cut. Size 100mm (4in) Cut : half round bastard. Tanged...

For filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work in high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both si...

The Bahco 1-100 Hand files with handles are for filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file may also be used for work in high-alloy tool steels. Also useful for the sharpening of heavy implements. ...

The Bahco HRFM-10 Filemaster is suitable for use on ferrous and non-ferrous metals, plastics, laminates and hard woods. The half round HRFM10 variant tapers towards the point and has milled, curved teeth. The concave back is uncut. Size : 25...

For filing circular openings or concave surfaces. Tapered towards the point, 4in and 6in files are fully pointed, 8in and longer are semi-pointed. All double cut. Size 300mm (12in) Cut : round second. Tanged. ...

High carbon steel, hardened and tempered with soft grip handles incorporating hang hole. Contents : flat, half round and round...

With one safe edge. Carbon chrome steel hardened and tempered with rust preventative finish and dipped in rust preventative oil. Manufactured in accordance with BS498 : 1990...

With one safe edge. Carbon chrome steel hardened and tempered with rust preventative finish and dipped in rust preventative oil. Manufactured in accordance with BS498 : 1990...