Pressurised tank for maximum power. Supplied with 2.4mtr rubber hose, five ceramic nozzles and in-line water trap for moisture-free grit blasting. Also includes bayonet air line coupling and air flow regulator. Accepts a variety of grits up to 80micr...

Used for removal and installation of the core from a wheel valve. Features easy grip handle and ideal for the busy workshop. Suitable for motorcycles, cars and commercial vehicles. Length : 97mm...

Lightweight aluminium frame with tough steel mesh. Adjustable guard protects the user and/or passer by from being injured if workpiece is accidently dislodged under load. Bolts onto either side of the table and features five height increments, allowi...

Features : For removing bearings, sprockets and flywheels - Cross-legged configuration recommended - Optional uncrossed-legged configuration doubles capacity - Puller accessories (sold separately) : slide hammer U.306M for U.35 and U...

Specifications : Trave : 5 mm Shear-pin rating : 110 Nm Supplied with 2 shims 25 and 50 mm Plunger : 33 mm Length : 260 mm, head height : 35 mm Force : 30 tonnes 300 kN Hexagonal screw : 19 mm...

Fast, simple and accurate alignment of both front and rear wheels. Optimises vehicle performance and set up after installation or modification of steering or suspension components. Simple and fast to use, it is ideal for the busy professional worksho...

Specialist tool designed to remove 11mm and 12mm TPMS sensor nuts and reseating the bevelled and non-bevelled sealing grommets....

Drop-forged, Chrome Molybdenum steel reversible legs and body. Suitable for pulling hubs, flanges, gears and bearings. Features ratcheting mechanism to locate and hold the legs in the correct position, making the tool faster and easier to operate tha...

Suitable for removal/installation of the front control arm suspension bush on BMW Mini. Supplied with instructions in carry-case. Applications : BMW Mini One, Cooper, Cooper S (01on) R50/R53 Chassis W10/W11/W17 Bush OE Number : 31 12 6 757 5...

Two level mobile tyre rack helps keep working area clear. Unit is on wheels for easy manoeuvrability when needing to take the tyres to point of work ideal for use track side. Steel construction with a powder coated finish giving anti-corrosion resist...

Features : Position, adjust by turning the knob, and turn around the tube to cut the exhaust Ratchet tube cutter : Capacity Ø 31 - 65 mm Tube thickness up to 3 mm...

Kit comprising Stock No.27298 Tyre Tread Depth Gauge, Stock No.74304 Tyre Pressure Gauge and Stock No.11502 Tyre Valve Repair Tool....

Cleans internal and external valve stem threads and removes valve cores....

Plated ductile body casting with hardened screw for use on four stud wheels. Bolt centres 100-115mm....

For the installation of bearings and seals. Helps avoid damage to bearing and seal faces. Packed in blow mould case and display sleeve. Contents : •   9 x aluminium drive flanges size : 39.5, 44.5, 50, 59, 63, 65, 72, ...

Puller with two reversible legs for external and internal pulling of gears, bearings, etc. Legs are forged carbon steel and have long and short reach facility. Yoke and thrust bolt are manufactured from carbon steel. Screw has a rolled thread with ch...

Forged carbon steel body with plated finish. Jaw opening 19mm and throat depth 70mm....

Expert Quality , set of three 6 point Draper Expert HI-TORQ® sockets sizes 17, 19 and 21mm. Manufactured from chrome molybdenum steel hardened and tempered. Sleeved with nylon internally and externally to prevent damage to wheels an...

Use in conjunction with Model No. GA42 Gauge Set for accurate castor and kingpin alignment. Also measures toe-in/out and full lock angles. Locking pins prevent rotation of table whilst driving vehicle on and ensure accurate angular measurements. Meas...

Triple leg puller with reversible, drop-forged, Chrome Vanadium steel legs. Heat treated for added strength and chrome plated to resist corrosion. Swivel thrust plate prevents damage to shaft ends. Size/Spread : 285mm Reach : 250mm...