Kit converts RE230 Strut & Spring Compressing Station into RE231 Coil Spring Compressing Station with two pairs of spring yokes and upper and lower yoke carriers. Includes safety chain. Maximum Load : 1500kg Spring Diameter : 90-170mm Cont...

Forged steel body with satin finish. Suitable for most small cars and light vans. Length : 200mm Jaw Capacity : 19mm...

Low profile design with heavy-duty forged steel body suitable for modern vehicle applications where restricted access is a problem. Includes hardened screw and thrust ball for added splitting power. Jaw Capacity : 28mm...

Dial type pressure gauge with metal body and offset valve connector. Accurate to ±1.5psi. Scale : 0-3bar(0-40psi)...

Robust steel tool for the safe removal and installation of the spring clamps used to attach exhaust system to manifold on VAG vehicles. Use with 17mm spanner. Drive : 17mm Hex Applications : Audi, Seat, Skoda, VW...

Robust gauge with protective rubber bumper reading up to 8bar (120psi). Fitted with 335mm armoured flexible hose and pressure release button. Integral colour coded/measurement tyre depth gauge. Scale : 0-8bar(0-120psi) Accuracy : ±3% Tyre ...

Designed for twin tyres but suitable for all cars and commercial vehicles. Scale from 6-50psi in 1psi graduations. Dust cap includes valve core removal tool. Scale : 6-50psi...

Pencil type gauge with chromed steel body and pocket clip. Scale from 6-50psi in 1psi graduations. Dust cap includes valve core removal tool. Scale : 6-50psi...

Invaluable when installing exhaust systems. Two T-handled tools allow easy fitting of exhaust mounts. One straight and one hooked to suit block and ring mounts respectively. Length : 210mm...

Remove/install rear sub-frame bushes in Mondeo. Can be used in situ - no need to remove sub-frame from vehicle. Supplied in carry-case. Applications : Ford Mondeo (01on)...

Up-to-date kit for the installation and removal of front hub bearings without the need to dismantle the steering knuckle and strut assembly. Fast and simple to use. Suitable for most front wheel drive cars. Heavy-duty steel drifts with black phosphat...

Robust composite body with backlit LCD digital display. Select between bar, psi, kg/cm² and kPa. Features built-in LED work light for use in low visibility areas, auto power off (to preserve battery life) and low battery indicator. Supplied with 350m...

Tyre lever to aid the removal of pneumatic tyres. Drop forged alloy steel. Hardened and tempered. ...

Carbon steel tyre lever with hook ends. Suitable for use on commercial vehicle tyres. Length : 940mm...

Replacement cutting wheel for VS16371....

Steel frame construction with hydraulic pump unit. Sliding hydraulic ram assembly gives 370mm of lateral travel for off-centre pressing applications. Frame head fitted with ram pressure gauge. Supplied with flat pressing plate/V-blocks. Bench ...

Suitable for the removal/installation of the rear mounting bush on the front lower wish-bone. Can be used in situ without removing the aluminium housing. Use with 24mm spanner only. Supplied in carry-case. Applications : Seat Cordoba III (03on...

Lightweight aluminium frame with tough steel mesh. Adjustable guard protects the user and/or passer by from being injured if workpiece is accidently dislodged under load. Bolts onto either side of the table and features five height increments, allowi...

Suitable for the fast and easy removal/installation of the steering knuckle. Designed to fit over the steering shaft onto the steering rack. Fits racks with hex drive, two flats and round ends with a diameter of 35.5 to 41mm. Model No. VS4001 ...

Inspection creeper Features : 6 wheels - Foam head rest - 2 tool storage trays - Resistant to hydrocarbons, washable - Dimensions : 480 x 1030 x 115 mm Specifications : Weight : 4.6kg...