Telescopic two-stage ram gives a higher maximum lift than the standard range, while keeping the same compact closed height. Cast base with threaded components for easy disassembly. Supplied with 2-piece operating handle. Capacity : 2tonne Mi...

Ideal for moving heavy objects. The wire rope (not supplied) is easily fitted via a hinged section of the side plate. Pulley sheave runs on maintenance-free bushes. Suitable for industrial and automotive applications. Working Capacity : 2000kg

A fully adjustable saddle with forward, backward and side-to-side tilt. Note : When using these adjustable supports the maximum capacity of the jack and support combination will be limited to the lowest specified capacity in the combination. e.g. 600G...

All steel stand with pin and chain load support. Full width V-crutch for safe support of load. Manufactured in the UK, to rigorous safety standards. Capacity Each : 4tonne Capacity Pair : 8tonne Minimum Height : 1195mm Maximum Height : 18...

Designed to support and accurately position engines during maintenance operations such as replacing anti-vibration mountings and certain body panels. Also used as an aid for the removal of gearboxes and transmissions. Beams supported on rubber feet a...

Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral...

Rugged construction features drop-forged and heat treated pinion gear with totally enclosed mechanisms. Equipped with heavy-duty brake and high quality alloy steel chain for durable and safe operation. Free-chaining feature permits slack in the load ...

Versatile stand suitable for a wide variety of bodyshop applications. Work height is fully adjustable by lengthening chains. Foam cushioned supports help prevent marking of panel. Folds away when not in use. Width : 1040mm Folded Height : 110...

Suitable for use with our lever hoists or chain blocks. Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer. Capacity...

Manufactured to German TUV/GS standards. Fine rolled thread and precision made thrust bearing for long life and smooth operation. Capacity : 1.5tonne Minimum Height : 100mm Maximum Height : 375mm Closed Length : 405mm...

All steel construction with air motor powering the hydraulic pump. Safety lock device for preventing accidental lowering and front wheel clamp assists to secure motorcycle. Only suitable for motorcycles with a centre stand. Support platform fitted wi...

All steel construction with air pump or foot pedal for manual operation. Integral hydraulic pump and air motor assembly. Fitted with platform safety lock device to prevent accidental lowering. Front wheel clamp for stability and sliding panel for eas...

All-steel scissor type construction with foot operation and integral hydraulic pump. Unique foot design and safety pins allow use with off-road/trials bikes. Features three locking heights. Support platform with rubber top protects paintwork on bike....

Expert Quality , ideal for the workshop or factory this chain hoist has a triple spur geared shaft and pinion with load braking. The compact gear housing allows use in areas of limited clearance. High quality welded chain, 7mm diameter, ...

Heavy-duty trolley jacks. Foam protection on the arm. Saddle rubber protection. Synthetic wheels. Minimum height 68mm. ...

Aluminium Heavy-Duty Trolley Jack 3T. Capacity 3000Kg. Saddle 120 mm Frame dimensions 710 mm x 368 mm Max Height : 495mm ...

Designed to allow cars with low ground clearance in mind these ramp extensions, when combined with a pair of CR2 car ramps allow good access to many types of sports and modified cars. Car Ramp NOT Included....

Lifts and stabilises hard and soft tail cruiser style bikes quickly and safely. Features adjustable length and height with soft PVC sheaths for protection to underside of bike. Lifts complete bike off the ground allowing easy removal of wheels.

60mm Extension adaptor for use with 2tonne Low Profile Jacking Beam - Model No. SJBEX200LP Capacity : 2tonne Extension Length : 60mm...

Supplied with winding handle. Manufactured to EN1494 Specification...