For working on most common external and internal radiator vale fittings....

Designed to fit into manhole covers to help with lifting and removal, these keys are manufactured from steel and plated for corrosion resistance. Heavy-duty 140mm (5 1/2 in) ...

Expert Quality , with two square, one triangle and one stepped key profile plus a double-ended 7mm plain/No.2 cross slot insert bit 40mm long. Holder included for 1/4 insert bit....

Expert Quality , with two square, one triangle and one circle with fins key profile plus a double-ended 7mm plain/No.2 cross slot insert bit 40mm long. Holder included for insert bit. ....

Designed for use on the locking systems of electrical, gas and water cupboards commonly found in industry and on technical equipment in buildings such as air conditioning, stop valves, mains consoles, doors etc. Compact design, light and strong. 9 ke...

Monument mini stopcock key designed for the difficult job of turning on and off hard to get at stopcocks of the crutch head type. For example mains cocks located in bathroom showers, cupboards under kitchen units, sinks, stiff to turn outside taps...

Square opening keys for use on domestic radiator bleed screws. Manufactured from zinc alloy. Packed two per display card or two per display box....

Malleable cast square suitable for 1/2 and 3/4 square heads. ‘U’ shaped crutch suitable for 1/2 and 3/4 tee handled stop cocks. Manufactured from zinc plated mild steel....

Designed to fit into manhole covers to help with lifting and removal, these keys are manufactured from steel and plated for corrosion resistance. The light duty key is suitable for non-locking covers and pedestrian duty broadsted. Lift...

For bleeding the air from radiators especially after the summer period of non-use of heating systems. Supplied in the natural brass condition. ...

Monument Steel radiator spanner for 3/8 in and 10 mm square section radiator vent plugs and bleed screws. Zinc plated finish with slightly offset handle. ...

Square opening keys for use on domestic radiator bleed screws. Packed two per display card....

A highly innovative and well thought through wrench specifically designed for working on combi boiler connections. Due to the restriction is space between the inlet and outlet pipes, working on the connections is extremely difficult often resu...

Crutch pattern stopcock key with also 1/2 and 3/4 in square valve fittings. Turning handle has one point end for lifting covers. Length 900mm (35 1/2 in). ...

For reaching and turning off and turning on stopcocks set below ground level. Zinc plated for corrosion resistance. Crutch Head x 1070mm (42 in) ...

Square headed stopcock keys for reaching and turning off and turning on stopcocks set below ground level. Zinc plated for corrosion resistance. 1/2 in square x 860mm (34 in) ...

Pair of manhole keys for the removal of manhole covers. Malleable iron T shaped handles with D shaped key ends. Packed two per display card....

Re-engineered to accommodate turning off/on 5 stop tap styles in one simple tool. Double ended with 1/2 in and 3/4 in on one end whilst accommodating 1/2 in, 5/8 in and 3/4 in squares on the other. Handle is used on either end and all el...

The Scottool Radiator and Valve Key. One end of this key is machined into 10 mm square for installAtion of 1/2 in BI plugs and 1/2 in vent plugs. The other being used for installation of internal hexagon valves. Type 1 1/2 in secti...

Monument multi purpose four way key for gas, water and electric meter cupboards, air conditioning units, stop valves, mains consoles etc, central heating pump cocks, some radiator valves and drain off valves. ...