This Profile Scriber produces the same type of joint, and use the same components as the standard PSC sets. Both parts of the joint are cut by only changing the cutter height. No reassembly of parts is required, to convert the tool from scribin...

This Profile Scriber produces the same type of joint, and use the same components as the standard PSC sets. Both parts of the joint are cut by only changing the cutter height. No reassembly of parts is required, to convert the tool from scribin...

The classic method of producing cabinet panelled door and drawer fronts is made easy with the Profile Scriber set. The components are rearranged on the arbor to cut the profile or the scribe. For a range of complimentary panel mould cutters.

When the extra two profile blocks are interchanged, two more types of profile scriber joints can be produced. By using the extra groover, a 1/4 inch tongue & groove joint can be made. Dimensions : Bearing Diameter : 22mm Shank Diameter : ...

Replacement Solid Carbide blades. Supplied in a protective plastic box. Dimensions : Length = 50.0mm Width = 12.0mm Thickness = 1.5mm Quantity = 10 Please note that prices in the Trend Catalogue download, if shown below, ...

A unique product which allows access covers for pipes and cables to be installed beneath chipboard floors, using a router. Cuts only the thickness of the board. No waste - the piece cut out is used to make good the floor. Starter kit inclu...

A unique product which allows access covers for pipes and cables to be installed beneath chipboard floors, using a router. Cuts only the thickness of the board. No waste - the piece cut out is used to make good the floor. Starter kit inclu...

For 18mm thick floors a pack of 10 ROUTABOUT Rings. Dimensions : For 18mm thick floors. Pack of 10 Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Ca...

Revolutionary routing concept that creates variable depth intricate wood carvings with a hand router. Woodcarvings can be made on new or existing doors, frames and drawer fronts. An economical way to purchase an initial Router Carver system.

Designed to mill slots in both plastic and non-ferrous metal. Aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. With M10 x 1.5 internal thread, for UPVC plastics and aluminium.

Designed to mill slots in both plastic and non-ferrous metal. Aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. With M10 x 1.5 internal thread, for UPVC plastics and aluminium.

One replaceable Solid Carbide blade. For specialist applications requiring low down-time and economy of a replaceable tip. The single blade can be rotated 180 degrees to give double the life of a conventional tool. Blade is fixed directly ...

Trend Rota-Tip A=45í X 27mm Dia (Tct Router Cutter Range / Rota Tip) Two replaceable Solid Carbide blades. For specialist applications requiring low down-time and economy of a replaceable tip. Blades can be rotated in 90 degrees increme...

Two replaceable Solid Carbide blades. For recessing, rebating & housing. Rotate replaceable blades 180 degrees to give increased life Plunge tool with a TC tip brazed into nose. Suitable for plunge cutting. Dimensions : Diameter...

Two replaceable Solid Carbide blades. For recessing, rebating & housing. Rotate replaceable blades 180 degrees to give increased life Plunge tool with a TC tip brazed into nose. Suitable for plunge cutting. Dimensions : Diameter...

Replacement key for the rota-tip cutters. Gives positive and quick action to help prevent overtightening and to allow quick tightening of the screw. Dimensions : Torx T15 Please note that prices in the Trend Catalogue download, if ...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. Solid Tungsten Carbide. Greater durability. Better plunge characteristics. Dimensions : ...

Cuts cleanly without feather edging. Solid Carbide for long life. Cuts to a fine ' V' groove point. Dimensions : Diameter : 14.5mm Cutting Length 1 : 12.5, Cutting Length 2 : 14mm Angle : 60 degrees Shank Diameter : 8mm

Trend Economy Trim A=90íX6.3mm Dia X 38mm (Stc Router Cutter Range / Laminate Trimmers) Cutter for trimming and bevelling timber, lippings and plastic laminate. Can only be used in laminate trimming routers, or when straight fence guides ar...

Solid carbide rasp. Solid coarse cut Carbide Rasp/Burr. For grinding, carving and shaping of glass reinforced plastics (GRP). Use at speed 10000 -30000 RPM. Not suitable for plunge cutting. Dimensions : Diameter : 6.3mm Cuttin...