Four piece router bit set for use with kitchen worktop jigs. Tungsten carbide bits suitable for all routers with 1 /2in collet. Set contains : 1 Straight Cutter : 12.7mm x 60mm x 1 /2in shank 2 Straight Cutters : 12.7mm x 50mm x 1 /2in sh...

Festool groove cutting disc HW. Features : Make grooves on the front using cutter discs with a cutter width of 1.5 mm to 5 mm - The milling discs can be combined with the cutter spindle without ball bearing or with a ball bearing Ø of 1...

One tool with two uses - by using the small 9.5 mm ball bearing (included with the delivered items), the router can be converted to an ovolo edge cutter. Specifications : D - 18,7 mm NL - 10 mm GL - 50 mm R - 3 mm...

Dustproof clamping collets for routers OF 1400 and OF 2200. Open-ended spanner width 24 mm. for router shank Ø 8 mm...

Dustproof clamping collets for routers OF 1400 and OF 2200. Open-ended spanner width 24 mm. for router shaft 9.53 mm...

For supporting and accurate cutting of long workpieces to length. Secured to the AB-KS crown stop. simple extraction and rolling out of measuring tape thanks to telescopic mechanism Technical data Total length 1280 - 2070 mm...

Tungsten carbide tipped single flute router bit. Shank 6.35mm 1/4in Size 4mm Type Single flute...

This specially designed machine bits has a new form of scriber to allow use at higher speeds. For recessing circular hinges. For accurate repetitive routing, a template and guide bush fitted to the router base should be used. Use between 100...

Assortment of router bits with T.C.T. heads to suit most applications. Supplied in display case. Contents : •   3 x straight bits - 6, 12 and 16mm diameter. •   90° ‘V’ groovi...

A single flute ornamental engraving cutter with replaceable tip. Ideal for cutting inscriptions, ornamental grooves and engraving on CNC routers. Negative shear angle allows for chip free cutting. The blade can be rotated 90í to give four ti...

Face plate template for the LOCK/JIG. Dimensions : 43.6 X 78.2mm Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend List Prices excludi...

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is Teflon cutted to reduce resin build up. Neatly cuts grooves on doors or frames to accept a weattherseal. Dimensions : Diameter=36...

A two piece cutter set to create a traditional frame and panelled door using a router in a table. The cutters have extra long shanks and can be used in natural timber. Supplied in a wooden box with instructions Dimensions : Profile scr...

A pocket hole drill with quick release shank fitting for use with quick chucks. Dimensions : Diameter 9.5mm (3/8) Quick change shank Please note that prices in the Trend Catalogue download, if shown below, may differ to the web...

Side profile for an attractive handrail. Can be used in conjunction with four different cutters to produce different handrail tops. Dimensions : Diameter=32 mm Cutting Length : 38 mm Bearing Diameter : 16 mm Cutting Radius 1 : 9.5 ...

Four piece cutter set for use by kitchen fitters comprising two worktop cutters, one long series cutter and one laminate trimmer. Can be used in natural timbers, particle board and fibreboard. Please note that prices in the Trend Catalogue ...

Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees. Dimensions : Diameter=38.1 mm Cutting Radius 1 : 9.5 mm Shank Diameter : 1/2 inch Please note that prices in the Trend Catalogue...

For coves and part of a rule joint. Two flute. For stationary machines - 18000 RPM recommended speed. Dimensions : Diameter : 50.8mm Cutting Length : 1 1/4inch Cutting Length : 31.7mm Cutting Radius : 25.4mm Shank Diameter : 12...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Dimensions : Diameter=10 mm Cutting Length : 30 mm Overall Length : 76 mm Shank Diameter : 1/2 Please note that p...

For stationary machines or portable routers mounted in a table at 12000 RPM recommended speed. Dimensions : Diameter=86 mm Cutting Radius 1 : 40 mm Shank Diameter : 1/2 inch Please note that prices in the Trend Catalogue download,...