This tap is ideally used for machine tapping of threads. It takes the swarf or chips away from the cutting direction. Takes the thread to the bottom of the hole. Mainly used for cutting threads in steel but can be used for other materials....

This tap is ideally used for machine tapping of threads. It takes the swarf or chips away from the cutting direction. Mainly used for cutting threads in steel but can be used for other materials....

Suitable for cleaning and rethreading mild steel or aluminium. Manufactured from high carbon steel, hardened and tempered. Supplied in plastic case with display sleeve. Contents : •   16 metric dies size : 3 x 0.5, 3 x ...

Image for illustration only....

Image for illustration only....

Image for illustration only....

Image for illustration only....

Image for illustration only....

Image for illustration only....

This hand tap is ideally used at the end of the thread cutting process. Can also be used for blind holes. Mainly used for cutting threads in steel but can be used for other materials. (Also known as a Bottoming Tap)....

Manufactured from high carbon steel with accurately cut coarse threads. Packed one of each, taper and plug, (bottoming) on display card....

Manufactured from high carbon steel with accurately cut coarse threads. Packed one of each, taper and plug, (bottoming) on display card....

A tap wrench precisely constructed with an ergonomically designed sliding 'T' handle for fitting into tight spaces with ease. The ratchet can be set for right or left hand operations or fixed in the neutral position. The Faithfull FAITWRM6M1...

Ideal kit for re-threading. Manufactured from high carbon steel. Contents : •   4 metric coarse dies size : M3, M4, M5 and M6 - 1 O/D •   4 metric taper taps size : 3, 4, 5 and 6mm •...

Manufactured from carbon steel. Taps and dies suitable for cleaning and cutting threads on mild steel and aluminium. Supplied with the correct drill bits for tapping. Contents held in plastic insert within steel storage case. Contents : &#...

High quality steel taps and dies. Split dies with machined lead-ins for ease of use. Die holder features self-centring mechanism for straight and accurate thread cutting. Set includes T-handled tap wrench, Metric screw pitch gauge and slotted 5mm scr...

Taps and dies are suitable for chasing out damaged threads and the removal of nicks and burrs without undercutting good threads. Use with a standard spanner and a little light oil. Thread file restores damaged external threads on any diameter, right ...

A Recoil Tap is used when an existing thread has been damaged or stripped. The tap will form a thread slightly oversize the specified thread size. Size.M6 x 1.00 Pitch. Intermediate ...

Taps manufactured from high quality Tungsten steel hardened and tempered for long life. Contents : 3 x 0.5, 4 x 0.7, 5 x 0.8, 6 x 1.0, 7 x 1.0, 8 x 1.25, 9 x 1.25, 10 x 1.5, 12 x 1.75mm, 1/8 - 28BSP...

This hand tap is ideally used at the end of the thread cutting process. Can also be used for blind holes. Mainly used for cutting threads in steel but can be used for other materials. (Also known as a Bottoming Tap)....