Allows the water supply to be divided in up to four outlets with individual flow valves. Unique design remote from the tap allows convenient water supply anywhere in the garden, just run a length of hose from the tap to the Hozelock 4 Way Tap Connector. Allows the use of two Electronic Water timers running separate irrigation systems (e. G. one for a greenhouse and one for a patio). Can be used with or without wall bracket supplied.(Includes 2 Hose Connectors 2166) - Ideal for installing individual watering systems

Allows the water supply to be divided into two outlets with standard male hose connectors. Twist dial to select supply outlet off, 1, 2 or both. Fits directly onto your outdoor tap

Threaded adaptor with male connector. Converts female threaded accessories to male end. For use with Hozelock fittings

Use to join two pieces of

3/4 inch BSP connector which attaches hose to taps with 3/4 inch BSP (19mm) thread. Complete with adapter for taps with 1/2 inch BSP (12.5mm). For use with Hozelock fittings

Double ended male connector which will allow two lengths of hose equipped with female connectors to be joined and separated quickly. For use with Hozelock fittings

Three way connector which allows the hose to branch into two directions. For use with Hozelock fittings

Use the Hozelock Hose Adaptor to convert the male outlet to 3/4 screw thread (e. G. to allow the fitting of a Tap Timer or Pressure Regulator on the outlet side). For use with Hozelock fittings

All-plastic Double Check Valve for use on outside taps to prevent backflow siphonage of contaminated water into the mains. Suitable for all 1/2 inch BSP, 5/8 inch BSP and 3/4 inch BSP threaded taps and approved by the water research council. For use with Hozelock fittings

Hozelock tap connector designed to attach a hose to a wide variety of square, round and mixer taps up to 43mm high by 34mm wide. Complete with a choice of sealing washers to provide a leak-free connection. For use with Hozelock fittings

CK Brass Interlock Adjustable Spray Nozzle - CK brass adjustable spray nozzle varies flow from off through spray to hard jet.

Y shaped brass hose connector to connect three

Sunmate Brass

Hozelock Tap Connector to attach a hose to round or oval spout taps with a maximum diameter of 18mm. The connector is sealed to the tap by tightening the clip. For use with Hozelock fittings

Sunmate Hose Tap Manifold

Draper 1/2 Brass Hose Connector

Draper Brass Hose Repair

New quick-connect hose connectors are a step ahead of all the others. The Aquastop connector has an internal valve that stops the water flow when an accessory (e.g. a spray gun) is disconnected. This saves you having to go back to the tap to turn the water off when you are switching between accessories. It also helps you save water in the garden because it stops the water flow so less water is wasted. Suitable for use with all 19mm 3/4 and 15mm 5/8ths hose. All internal parts are made from ultra tough engineering plastics for a long leak free life. The connection to the tap is guaranteed secure up to 10 bar, thanks to a triple locking system. The sleeve is easy to use even when wet because of the twin soft touch pads. The hose is firmly connected thanks to barbs that connect with the inside and outside of the hose. Hose kinking , hose swelling, and hose leaking at the connection point with the fitting is virtually eliminated due to the ingenious flexible hose-tail on the nut.

Draper Brass Autostop Connector from Draper Expert is a 1/2 hose connector with water stop.

CK Double Male Connector