Allows the water supply to be divided in up to four outlets with individual flow valves. Unique design remote from the tap allows convenient water supply anywhere in the garden, just run a length of hose from the tap to the Hozelock 4 Way Tap Connector. Allows the use of two Electronic Water timers running separate irrigation systems (e. G. one for a greenhouse and one for a patio). Can be used with or without wall bracket supplied.(Includes 2 Hose Connectors 2166) - Ideal for installing individual watering systems

Allows the water supply to be divided into two outlets with standard male hose connectors. Twist dial to select supply outlet off, 1, 2 or both. Fits directly onto your outdoor tap

Threaded adaptor with male connector. Converts female threaded accessories to male end. For use with Hozelock fittings

Use to join two pieces of

3/4 inch BSP connector which attaches hose to taps with 3/4 inch BSP (19mm) thread. Complete with adapter for taps with 1/2 inch BSP (12.5mm). For use with Hozelock fittings

Double ended male connector which will allow two lengths of hose equipped with female connectors to be joined and separated quickly. For use with Hozelock fittings

Three way connector which allows the hose to branch into two directions. For use with Hozelock fittings

Use the Hozelock Hose Adaptor to convert the male outlet to 3/4 screw thread (e. G. to allow the fitting of a Tap Timer or Pressure Regulator on the outlet side). For use with Hozelock fittings

All-plastic Double Check Valve for use on outside taps to prevent backflow siphonage of contaminated water into the mains. Suitable for all 1/2 inch BSP, 5/8 inch BSP and 3/4 inch BSP threaded taps and approved by the water research council. For use with Hozelock fittings

Hozelock tap connector designed to attach a hose to a wide variety of square, round and mixer taps up to 43mm high by 34mm wide. Complete with a choice of sealing washers to provide a leak-free connection. For use with Hozelock fittings

Hozelock Tap Connector to attach a hose to round or oval spout taps with a maximum diameter of 18mm. The connector is sealed to the tap by tightening the clip. For use with Hozelock fittings

New quick-connect hose connectors are a step ahead of all the others. The Aquastop connector has an internal valve that stops the water flow when an accessory (e.g. a spray gun) is disconnected. This saves you having to go back to the tap to turn the water off when you are switching between accessories. It also helps you save water in the garden because it stops the water flow so less water is wasted. Suitable for use with all 19mm 3/4 and 15mm 5/8ths hose. All internal parts are made from ultra tough engineering plastics for a long leak free life. The connection to the tap is guaranteed secure up to 10 bar, thanks to a triple locking system. The sleeve is easy to use even when wet because of the twin soft touch pads. The hose is firmly connected thanks to barbs that connect with the inside and outside of the hose. Hose kinking , hose swelling, and hose leaking at the connection point with the fitting is virtually eliminated due to the ingenious flexible hose-tail on the nut.

For repairing damaged hose, or permanently connecting two lengths of hose, the Pro Metal Hose Repair Connector is made from Nickel Plated Brass which ensures a strong and durable connection. Scratch and frost resistant, the Pro Metal Hose Repair Connector comes with a 3 year guarantee.

Pro-Metal double ended male connector allowing two lengths of hose equipped with female connectors to be joined. Made from Nickel Plated Brass which ensures a strong and durable connection. Scratch and frost resistant, the Pro Metal Double Male Connector comes with a 3 year guarantee.

Attach the Hozelock Indoor Threaded Tap Connector onto your indoor tap to connect your hose. Hozelock Indoor Threaded Tap Connector can be used on modern kitchen taps that have a built in aerator cartridge. This tap connector provides a secure method of temporarily attaching a Hozelock connector to a kitchen tap. Simple to use: remove the existing aerator cartridge from the end of the tap, and then screw in the new Hozelock cartridge. The new cartridge protrudes by an extra 8mm - there is a 3/4 bsp thread on the protrusion. Screw the Hozelock Indoor Threaded Tap Connector onto the 3/4 bsp thread when you want to connect the hose to the tap. Also included in the pack is a tap connector.

Hozelock Pro Metal Hose End Connector with scratch-resistant zinc die-cast sleeve and anti-kink flexible hose tail. Thanks to a triple locking system, the connection to the tap is guaranteed secure up to 10 bar - which is ten times more pressure than the water companies are required by statute to deliver to a residential property. Suitable for use with all 12.5mm 1/2 and 15mm 5/8ths hose. All internal parts are made from ultra tough engineering plastics for a long leak free life.

Hozelock Pro Metal Waterstop Connector is strong, durable and scratch resistant thanks to the zinc die cast sleeve. The Aqua Stop connector incorporates an internal valve that stops the water flow when an accessory is disconnected. Suitable for use with all 12.5mm 1/2 and 15mm 5/8ths hose. All internal parts are made from ultra tough engineering plastics for a long leak free life. The connection to the tap is guaranteed secure up to 10 bar, thanks to a triple locking system. Hose kinking, hose swelling, and hose leaking at the connection point with the fitting is virtually eliminated due to the ingenious flexible hose-tail on the nut.

Hozelock Pro Metal Threaded Tap Connector is a 3/4 BSP Pro Metal tap connector suitable for use with 95% of all outdoor taps. Includes a 1/2 adaptor for older taps. Produced from Nickel Plated Brass ensures that the Pro Metal tap connector is: Strong, Durable, Scratch Resistant, Frost damage free. The connector securely attaches to the outdoor tap, and converts it to the Hozelock quick connect system.

To be used at both ends of a hose, to attach the hose to the tap and to attach watering accessories (e. G. Spray Nozzle) to the other end.

Round Tap connector (max dia 24mm) - Designed for round and oval spout taps, maximum diameter 24mm. The fitting is sealed to the tap by tightening the stainless steel clip.