EXTREMELY LIGHTWEIGHTDesigned to win, the new KEO BLADE CARBON improves the experience associated with the use of blade technology in a clipless pedal. This new version is the result of experience gained during years of development in the heart of our manufacturing facility and to continual improvements made thanks to daily input from the greatest of champions.Lightweight, aerodynamic, powerful, the new KEO BLADE CARBON has all the assets to allow you to improve and optimize your performance until victory is yours. It is for these reasons that KEO BLADE CARBON is the unanimous choice of many champions who have made it a weapon of choice in the conquest of their greatest achievements.The KEO BLADE CARBON has the best weight / power ratio in its class.Its new design completely integrates the blade for unrivalled aerodynamics. Equipped with a carbon body and blade, the Blade Carbon is available in a Ti version (titanium spindle) that weighs a mere 95g per pedal, or in a CrMo version (chromoly spindle) for a weight of 110g per pedal. It is available in three tension release levels: 12,16 and 20.OPTIMIZED SPINDLE: MORE POWER TRANSFER AND RELIABILITYThe spindle of the new CARBON BLADE has been completely redesigned. It is built around an oversized axle and spindle that pass through internal roller and needle bearings located directly under the pedal platform. This new construction allows a gain of approximately 2 to watts at 100 rpm.The distance between the roller and needle bearings has been increased by 25%. This provides more rigidity along the entire length of the spindle, and as a consequence, improved power transmission.Special attention has also been given to ensure that it is water resistant. Weather resistance has been improved by 120% for even more reliability and longevity. To accomplish this, the new spindle received an updated end plug with an O-ring washer and has also been equipped with an internal, double-lipped seal.LOOK axles are only approved after a rotational test of 2 million cycles at 100 rpm with a load of 90 kg on the centre of the pedal and an eccentric rotation (which creates stress on each revolution). This is equivalent to a sprint by André GREIPEL of 1700 watts at 100 rpm for 333 hours! This test is much more demanding than the current standard, the ISO 4210.ULTRA-POWERFUL PLATFORMTo meet the demands of the most demanding cyclists, especially competitors, the pedal-cleat system must allow efficient power transfer thanks to a broad and rigid platform.The platform of the CARBON BLADE is fitted with a 67mm-wide stainless-steel plate, optimizing the cleat/pedal contact areas, regardless of pedalling angle.With 700 mm² of surface area, the CARBON BLADE offers an optimized contact platform for an efficiency and power transfer that is unmatched on today’s market.Its weight / power ratio positions it well above the competitionBODY AND BLADE CARBON TECHNOLOGYUsing a carbon body lightens the weight of the pedal and provides an additional gain in stiffness for improved power transfer.BLADE technology is a major technical innovation in the history of the automatic pedal because of its many benefits: LIGHTWEIGHT, AERODYNAMIC, ULTRA-SECURE WHEN CLIPPING IN AND OUTSPECIFICATIONSUSE: Race segmentBODY: CarbonSPINDLE: TitaniumTHREADING: 9/16 X 20 mmBEARINGS: 1 roller bearing, 1 needle bearingSTACK HEIGHT: 14.8 mmDISTANCE PEDAL SPINDLE / CRANKARM: 53 mmPLATFORM WIDTH: 67 mmPLATFORM SURFACE AREA: 700 mm²TENSION: Pedals come installed with “16” carbon blades + additional “12” carbon blades (“20” carbon blades sold separately)CLEATS: Kéo Cleats-GreyFLOAT: 0 °, 4.5 ° or 9 ° according to the cleat colour (Black, Grey, Red)PEDAL WEIGHT: 95g (248g per pair with cleats and screws)COLOURS: BlackACCESSORIES: 2 sets of blades +1 pair of Kéo Cleats-Grey + screwsWARRANTY: 2 years 

Keo Blade Carbon Cr 16Nm Greipel Signature Pedal Ibd Only Black

Look: Discover The Fun And The Benefits Of Riding With The Kéo Classic 3 Clipless Pedal.Simple To Use, It Is Possible To Adjustment The Cleat Entry/release Tension Too Low For An Easy Clip Out. Its Large And Wide Contact Surface Provides Excellent Pedalling Stability.Chromoly Spindle For More ReliabilityThe Kéo Classic 3 Spindle Is Made Up Of An Oversized Steel Axle With Miniature Ball Bearings (12 Mm Inside X 18 Mm Outside) And A Needle Bearing Cartridge For Improved Wear Resistance. A Spacer Is Used To Hold The Needle Bearing Cartridge In Place.Look Spindles Are Only Approved After A Rotational Test Of 2 Million Cycles At 100Tr/min With A Load Of 90Kg On The Centre Of The Pedal And An Eccentric Rotation (Creating A Shock On Each Rotation). This Test Is Far More Gruelling To The Current Industry Standard, The En14781.The New Classic Two Has 400 Mm² Surface Area Which Is Almost 40% More Than The Competition. The Significance Of This Is The Load Is Spread Around The Cleat Rather Than Having A Small Concentrated Area, Which Improves Comfort And Reduced Foot Discomfort.

Look: Discover The Fun And The Benefits Of Riding With The Kéo Classic 3 Clipless Pedal.Simple To Use, It Is Possible To Adjustment The Cleat Entry/release Tension Too Low For An Easy Clip Out. Its Large And Wide Contact Surface Provides Excellent Pedalling Stability.Chromoly Spindle For More ReliabilityThe Kéo Classic 3 Spindle Is Made Up Of An Oversized Steel Axle With Miniature Ball Bearings (12 Mm Inside X 18 Mm Outside) And A Needle Bearing Cartridge For Improved Wear Resistance. A Spacer Is Used To Hold The Needle Bearing Cartridge In Place.Look Spindles Are Only Approved After A Rotational Test Of 2 Million Cycles At 100Tr/min With A Load Of 90Kg On The Centre Of The Pedal And An Eccentric Rotation (Creating A Shock On Each Rotation). This Test Is Far More Gruelling To The Current Industry Standard, The En14781.The New Classic Two Has 400 Mm² Surface Area Which Is Almost 40% More Than The Competition. The Significance Of This Is The Load Is Spread Around The Cleat Rather Than Having A Small Concentrated Area, Which Improves Comfort And Reduced Foot Discomfort.

Keo Sprint Pedals Cromo Axle W-Keo Cleat Black

Look: Look Axle Assembly Keo Blade Carbon Ti R/h

Look: Look Axle Assembly Keo Blade Carbon Ti L/h

Spare-Axle Assembly Keo Blade Carbon Ti D12 V3 (2013) R-H

Spare-Axle Assembly Keo Blade Carbon Ti D12 V3 (2013) L-H

Look: Look Axle Cap & Bolt Kit For Keo Blade 2 Ti (Inc. L/h & R/h)

Look: Look Axle Assembly Keo Blade 2 Cromo R/h (Inc. Cap & Bolt)

Look: Look Axle Assembly Keo Blade 2 Cromo L/h (Inc. Cap & Bolt)

Look: Look Axle Cap & Bolt Kit For Keo Blade 2 Cromo (Inc. L/h & R/h)

Look: Replacement Retention Blade For The Look Keo 2 Blade Pedal. Carbon Blade Does The Work Of The Original Traditional Spring For Cleat Retention. Not Suitable For Other Pedals.

Look: Replacement Retention Blade For The Look Keo 2 Blade Pedal. Carbon Blade Does The Work Of The Original Traditional Spring For Cleat Retention. Not Suitable For Other Pedals.

Look: Replacement Retention Blade For The Look Keo 2 Blade Pedal. Carbon Blade Does The Work Of The Original Traditional Spring For Cleat Retention. Not Suitable For Other Pedals.

Replacement Keo 2 Max Blade tension springs for use with the Keo 2 Max Blade pedals. The Keo 2 Max Blade is a composite material and injected with glass fibres for smoother engaging for the Keo 2 Max.

Replacement Keo 2 Max Blade tension springs for use with the Keo 2 Max Blade pedals. The Keo 2 Max Blade is a composite material and injected with glass fibres for smoother engaging for the Keo 2 Max.

Cages that are compatible with the entire S-Track range of pedals increase the bearing surface significantly for enhanced control and maximum safety in technical and steep stages. These cages will also facilitate engagement into the pedal along with the movement of the foot. There are 3 cages to meet the needs of different types of MTB activity. The LT Cage is intended for leisure, the Sauser Cage is ideally suited to competition due to its excellent weight / platform area ratio, and finally the Trail Cage, thanks to its higher strength aluminium construction is recommended for enduro use.

Two decades of MTB pedal experience and innovation and three new LOOK patents have enabled us to create the S-Track.Versatile, lightweight, reliable and with a large platform contact surface, this MTB pedal is ready for any Cross Country, All Mountain or Enduro rides thanks to the addition of its Cage. The S-Track meets the needs of mountain bikers of all levels.DOUBLE CONTACT SURFACE AREAThe S-Track pedal a first in the MTB world to offer a dual contact surface:• Cleat and shoe contact – 200 mm² – via elastomer shims. This contact is guaranteed irrespective of the shoe model when using the 2mm shim.• An additional pedal contact- spikes can be installed by adjusting the cleat height with the different sized shims (.05, 1 and 2mm) slipped under the cleat. The total obtained contact area is 460 mm2, by far the largest on the market, and which in turn promotes power transmission and provides unprecedented comfort.NEW PATENTED ENTRY SYSTEMThe new “S” shaped wire-spring operates as a torque bar (LOOK patent) and is incredibly efficient: easy cleat entry and release in all conditions, no more surprise releases, excellent durability.This wire-spring was tested in the most severe conditions in the laboratory and field. The simplicity of the design makes the S-Track pedal compact, light weight, reliable, and ready meet the demands of mountain bikers of all levels.