The Mackwell DT32 is a combined electronic ballast and emergency module to run 26w and 32w triple turn compact fluorescent lamps.

Emergency Twin Spot - 2 x 20w - 3 Hour - 240V. This 240v twinspot is designed with high ceiling applications in mind. The directional twin heads makes this an ideal source of emergency lighting for buildings such as warehouses and sports halls.2 x 20w HAS lamp, 3 hour emergency duration, Non maintained, IP20 rated. This unit has a sealed lead acid - 12v/7.0 ah (x2 in 3hr model)

This is a Yuasa TEV12260 26ah 12volt sealed lead acid battery. This battery is designed for use in golf carts. It is also suitable for use in wheel chairs, lifts, toy cars, lawn mowers and much much more. Yuasa TEV range of batteries are high capacity cyclic VLRA batteries.

The Osram PTi 2x70i is a mains voltage high frequency ballast to run: 2 x 70 Watt Metal Halide lamp

Venture HIPE 225w/BU/UVS/PS/950 is a 225 watt Open Rated Natural White Metal Halide Venture lamp.This lamp has an average life of 20,000 hours and are supplied with a clear finish. This lamp has a giant screw cap and the colour is 5000k. Venture part number is 22994

The Mackwell AS2C/NM3 is an autotest non maintained emergency inverter for use with T5 lamps with wattages between 4w to 8w. It is fitted with a 5 pole relays to swich all four lamp connections from ballast to inverter and switch of the power to the ballast during emergency lighting testing. The modules can therefore be safely connected to a circuting with an electronic HF ballast and provide complete isolation to the control gear. This inverter should be used with a 2 cell battery pack.

The Mackwell AS3C/NM3 is a non maintained emergency inverter for use with T5 lamps with wattages between 18 and 36w. It is fitted with a 5 pole relays to swich all four lamp connections from ballast to inverter and switch of the power to the ballast during emergency lighting testing. The modules can therefore be safely connected to a circuting with an electronic HF ballast and provide complete isolation to the control gear. This inverter should be used with a 3 cell battery pack.

Venture HIT 400W/10K is a 400 watt Open Rated Tubular Ceramic Metal Halide Venture lamp.The colour temperature is 10,000. This lamp is Tubular and has a giant edison screw cap and is for use in aquariums and for special purpose lamps.Venture part number is 00276.

50w IP65 Rated LED Floodlight - Cool White. This 50w floodlight replaces a 300w halogen floodlight, it has a 50,000 hour life span, 100 degree beam angle, 4000 lumen output and a die cast aluminium housing. The dimensions of the light are 285x235x165mm, this light also comes with a 2 year guarantee.

A 180 Watt SOX low pressure sodium lamp with a BC (By22d) cap. SOX lamps have an extremely high efficiency and emit a yellow light. SOX Lamps are frequently used for road lighting, crossings, airports, docks, quarries and security lighting etc.

.Circular 3w LED Fitting (AC/DC). This 3w emergency light fitting is 220 - 240v, 50/60 Hz, 3hr emergency duration, 24hr recharging time and a 3.6v, 3 AH battery.

Venture HSN155202 Parmar Ballast is a 50hz ballast suitable for use with High Pressure Sodium,Metal Halide and Ceramic Metal Halide lamps.This ballast runs 1 x 150w lamp. This ballast has a metal base and enclosure, 2.5mm terminal block, microprocessor controlled, remotely operated up to 25m, accepts 0.75mm to 2.mm solid stranded cable.

The Mackwell DS42 is an integrated module to run single 13w and 42w triple turn compact fluorescent lamps in both mains and emergency modes. This is a combined high frequency ballast and emergency lighting unit. These should be used with a 4 cell battery when used with 13w lamps and 6 cell batteries when using 42w lamps.

The Mackwell DS22C is an integrated module to run single 22w circular T5 fluorescent tubes in both mains and emergency modes. This is a combined high frequency ballast and emergency lighting unit. These should be used with a 4 cell battery.

The Mackwell DS40C is an integrated module to run single 40w circular T5 fluorescent tubes in both mains and emergency modes. This is a combined high frequency ballast and emergency lighting unit. These should be used with a 4 cell battery.

The Mackwell DS55C is an integrated module to run single 55w circular T5 fluorescent tubes in both mains and emergency modes. This is a combined high frequency ballast and emergency lighting unit. These should be used with a 4 cell battery.

Venture HSN41322221 Parmar Ballast is a 50hz ballast suitable for use with High Pressure Sodium, Ceramic Metal Halide and Metal Halide lamps.This ballast runs 1 x 400w lamp. This ballast has a metal base and enclosure, 2.5mm terminal block, microprocessor controlled, remotely operated up to 25m, accepts 0.75mm to 2.mm solid stranded cable.

BriteArc single ended non hot restrike lamps are, high luminous effcacy, low infared, excellent lumen maintenance. These lamps are used for; Show Lighting, Theatre, Discotheque lighting, follow spot and architectural. these lamps can be operated by electronic power or magnetic supply. only use for closed fixtures. Cap:G12 Product no:23978

1000w Metal Halide Flood Light- Black floodlights are die-cast aluminium measurements: Height 420mm Width 590mm.(Does not come complete with lamp)

1 x 58w 5ft T8 IP65 Rated HF 240v Non-Corrosive Fitting c/w emergency back up. These IP rated fittings offer high ingress protection from moisture, dust, corrosion and vandalism. This high specification fitting also comes complete with a high frequency ballast and quick release gear tray and also has a 3 hour emergency back up operation. This unit does not included lamps.