BriteArc single ended non hot restrike lamps are, high luminous effcacy, low infared, excellent lumen maintenance. These lamps are used for; Show Lighting, Theatre, Discotheque lighting, follow spot and architectural. these lamps can be operated by electronic power or magnetic supply. only use for closed fixtures. Cap:GY9.5 Product no:7220169

Venture AV152523221 Parmar Ballast is a 50hz ballast suitable for use with High Pressure Sodium, Metal Halide and Ceramic Metal Halide lamps.This ballast runs 1 x 150w and 1 x 250w lamp. This ballast has a metal base and enclosure, 2.5mm terminal block, microprocessor controlled, remotely operated up to 25m, accepts 0.75mm to 2.mm solid stranded cable.

The Philips HID-PV 50 /S SDW-TG (mini white SON) ballast runs 1x50w metal halide lamps.this ballast is for use in luminaire,minimal lamp power spread, Lamp end of life detection, independent use with strain relief, long lifetime of 40000 hours it is also RoHS compliant. This Philips HID-PV is usually used in shop lighting as it creates a cosy atmosphere it is ideal for goods displays it is suitable for indoor use. This unit is designed for optimum system performance with Philips MASTERcolour CDM lamps.

The Philips HID-PV 100 /S SDW-TG (mini white SON) ballast runs 1x100w metal halide lamps.this ballast is for use in luminaire,minimal lamp power spread, Lamp end of life detection, independent use with strain relief, long lifetime of 40000 hours it is also RoHS compliant. This Philips HID-PV is usually used in shop lighting as it creates a cosy atmosphere it is ideal for goods displays it is suitable for indoor use. This unit is designed for optimum system performance with Philips MASTERcolour CDM lamps.

The Mackwell AS2C is an autotest emergency inverter for use with T5 lamps with wattages between 4w to 8w. It is fitted with a 5 pole relays to swich all four lamp connections from ballast to inverter and switch of the power to the ballast during emergency lighting testing. The modules can therefore be safely connected to a circuting with an electronic HF ballast and provide complete isolation to the control gear. This inverter should be used with a 2 cell battery pack. These inverters are maintained with 5 pole isolating relays and SmartStart. Smart start provides improved starting from low power batteries, immediate lamp strike with cathode heating for 30 seconds and cooler module operation.

The Mackwell AS3C is an emergency inverter for use with T8 lamps with wattages between 18 and 36w. It is fitted with a 5 pole relays to swich all four lamp connections from ballast to inverter and switch of the power to the ballast during emergency lighting testing. The modules can therefore be safely connected to a circuting with an electronic HF ballast and provide complete isolation to the control gear. This inverter should be used with a 3 cell battery pack. The Primian-2 inverters are maintained with 5 pole isolating relays and SmartStart. Smart start provides improved starting from low power batteries, immediate lamp strike with cathode heating for 30 seconds and cooler module operation.

The Mackwell AS4C is an autotest emergency inverter for use with T8 lamps with wattages between 18 and 58w. It is fitted with a 5 pole relays to swich all four lamp connections from ballast to inverter and switch of the power to the ballast during emergency lighting testing. The modules can therefore be safely connected to a circuting with an electronic HF ballast and provide complete isolation to the control gear. This inverter should be used with a 4 cell battery pack. These inverters are maintained with 5 pole isolating relays and SmartStart. Smart start provides improved starting from low power batteries, immediate lamp strike with cathode heating for 30 seconds and cooler module operation.

The Mackwell AS5C is an autotest emergency inverter for use with T8 lamps with wattages between 18 and 70w. It is fitted with a 5 pole relays to swich all four lamp connections from ballast to inverter and switch of the power to the ballast during emergency lighting testing. The modules can therefore be safely connected to a circuting with an electronic HF ballast and provide complete isolation to the control gear. This inverter should be used with a 5 cell battery pack.

The Lite-Plan HRN/T5/6/28+54 is a 3hr emergency lighting conversion kit. Specifically designed for use with 28w & 54w T5 fluorescent lamps.4-pole change over relay plus additional 5th pole for HF ballast isolation. This Lite-Plan conversion kit has the following benefits :- Specific T5 lamp calibration to maximise BLF%, 4 pole changeover relay, additional 5th pole relay, Deep discharge protection, Low profile enclosure, constant current charger and high temperature NiCd cells. The HRN/T5 range is supplied in conversion kit form. They are supplied as standard with the following parts :- 500mm green charge healthy LED indicator and mounting collar, 4 Cell kits are supplied with T1 NiCd and 6-Cell with T3 NiCd batteries and AMP irreversible battery connector.

The Lite-Plan HRN/T5/6/35+49 is a 3hr emergency lighting conversion kit. Specifically designed for use with 35w & 49w T5 fluorescent lamps.4-pole change over relay plus additional 5th pole for HF ballast isolation. This Lite-Plan conversion kit has the following benefits :- Specific T5 lamp calibration to maximise BLF%, 4 pole changeover relay, additional 5th pole relay, Deep discharge protection, Low profile enclosure, constant current charger and high temperature NiCd cells. The HRN/T5 range is supplied in conversion kit form. They are supplied as standard with the following parts :- 500mm green charge healthy LED indicator and mounting collar, 4 Cell kits are supplied with T1 NiCd and 6-Cell with T3 NiCd batteries and AMP irreversible battery connector.

Yuasa NPL24-12FR 12v 24ah sealed lead acid battery. Yuasa's NPL range offers all the same benefits of the NP range but extended life (7-10,000 hours) The FR version is Fire Retardent *Image is for illustrative purposes only*

The Mackwell AD123+ is an autotest M1/M3 3 cell combination emergency module and ballast to run 28w 2D compact fluorescent lamps. This module is designed for single lamp operation and can be used for 1 or 3 hour emergency duration.

The Mackwell AD128+ is an autotest M1/M3 4 cell combination emergency module and ballast to run 1 x 28w 2D compact fluorescent lamps. This module is designed for single lamp operation and can be used for 1 or 3 hour emergency duration.

The Mackwell D128/80+ is an M1/M3 4 cell combination emergency module and ballast to run 1 x 28w 2D compact fluorescent lamps. This module is designed for single lamp operation and can be used for 1 or 3 hour emergency duration.

 150w M.H. light fitting (Yellow - 110v)dimension: Length 270mm Width 122mm Height 368mm.(Does not come complete with lamp)

Venture PBE900245 Superimposed Standard Ignitor. This Ignitor is capable of igniting a 2000w SON and Metal Halide Lamps. The Venture part number is PBE900245.

Venture HIT 1000W/U/EURO/4K is a 1000 watt Enclosed Rated Euro Metal Halide Tubular Venture lamp.This lamp has an average life of 8,000 hours and are supplied with a clear finish. This lamp has a giant screw cap and the colour is 4000k. Venture part number is 00008

G64T5 65w T5 Germicidal Tube. This T5 Germicidal tube has a single pin cap and 7,500 hr lamp life.

The GE SPL2000/L/H/654/SPEC is a 250v 2000w quartz metal halide Sportlight with an SPEC. cap in colour 654 (5400K). These lamps have a lumen output of 200,000 lumens and an average life of 6,000 hours. It is 311mm in length and 26mm in diameter. GE part code 16922

Venture HIPE 400W/U/EURO/4K is a 400 watt Open Rated Euro Metal Halide Venture lamp.This lamp has an average life of 15,000 hours and are supplied with a clear finish. This lamp has a giant screw cap and the colour is 4000k. Venture part number is 99441