Venture HIPE 400W/C/U/EURO/4K is a 400 watt Open Rated Euro Metal Halide Venture lamp.This lamp has an average life of 15,000 hours and are supplied with a coated finish. This lamp has a giant screw cap and the colour is 4000k. Venture part number is 94102

Venture HDV26322221 Parmar Ballast is a 50hz ballast suitable for use with High Pressure Sodium, Metal Halide and Ceramic Metal Halide lamps.This ballast runs 1 x 250w lamp. This ballast has a metal base and enclosure, 2.5mm terminal block, microprocessor controlled, remotely operated up to 25m, accepts 0.75mm to 2.mm solid stranded cable.

The Philips HID-PV m 1x020/S High Power Factor minature ballast runs 1x20w metal halide lamps.this ballast is for use in luminaire,smallest gear available, minimal lamp power spread, microprocessor controlled, lamp end of life detection, long lifetime of 40,000 hours, lamp life is increased by up to 30% for CDM lamps, silent operation without hum it is also RoHS compliant. This Philips HID-PV is usually used in accent and decorative lighting for shops and retail, public spaces, lobbies and offices. This unit is designed for optimum system performance with Philips MASTERcolour CDM lamps.

The Philips HID-PV m 1x035/S minature ballast runs 1x35w metal halide lamps.this ballast is for use in luminaire,smallest gear available, minimal lamp power spread, microprocessor controlled, lamp end of life detection, long lifetime of 40,000 hours, lamp life is increased by up to 30% for CDM lamps, silent operation without hum it is also RoHS compliant. This Philips HID-PV is usually used in accent and decorative lighting for shops and retail, public spaces, lobbies and offices. This unit is designed for optimum system performance with Philips MASTERcolour CDM lamps.

Yuasa NP17-12IFR 12v 17ah sealed lead acid battery. Yuasa's NP range have many excellent features including: superb recovery from deep discharge, electrolyte suspension system, gas recombination, float or cyclic use, usage in any orientation (except continuous inverted), superior energy density and lead calcium grids for extended life. *Image is for illustrative purposes only*

This is a 60w LED corn light ideal for replacing metal halide and SON lamps. This lamp is equivalent to a 200w SON/MH and is supplied with a GES cap. The 60w corn light has a colour temperature of 6000K and an average life of 50,000 hours. Other colours are available on request.   General Characteristics Wattage [W] 60 Voltage [V] AC96-AC265 Lumens [lm] 6500 Cap/Base GES/E40 Lamp Shape Corn Light Lamp Diameter [mm] 90 Lamp Length [mm] 278 Colour temperature [K] 6000 Colour Rendering Index (CRI) [Ra] >70 Average Lamp Life [h] 50000 Working Temperature[°] 20-50 Beam Angle[°] 360 Working Frequency [Hz] 50-60 Equivalent MH/SON Wattage [W] 200 Wattage Reduction [%] 70

HMI 575W/GS Double Ended Lamp. This 575w 95v SFC10 base lamp has a 1000 hour lamp life and 6000k colour temperature.

The Lite-Plan HRN/T5/4/14+24 is a 3hr emergency lighting conversion lit. Specifically designed for use with 14w & 24w T5 fluorescent lamps.4-pole change over relay plus additional 5th pole for HF ballast isolation. This Lite-Plan conversion kit has the following benefits :- Specific T5 lamp calibration to maximise BLF%, 4 pole changeover relay, additional 5th pole relay, Deep discharge protection, Low profile enclosure, constant current charger and high temperature NiCd cells. The HRN/T5 range is supplied in conversion kit form. They are supplied as standard with the following parts :- 500mm green charge healthy LED indicator and mounting collar, 4 Cell kits are supplied with T1 NiCd and 6-Cell with T3 NiCd batteries and AMP irreversible battery connector.

The Lite-Plan HRN/T5/4/21+22 is a 3hr emergency lighting conversion kit. Specifically designed for use with 21w & 22w T5 Circular fluorescent lamps.4-pole change over relay plus additional 5th pole for HF ballast isolation. This Lite-Plan conversion kit has the following benefits :- Specific T5 lamp calibration to maximise BLF%, 4 pole changeover relay, additional 5th pole relay, Deep discharge protection, Low profile enclosure, constant current charger and high temperature NiCd cells. The HRN/T5 range is supplied in conversion kit form. They are supplied as standard with the following parts :- 500mm green charge healthy LED indicator and mounting collar, 4 Cell kits are supplied with T1 NiCd and 6-Cell with T3 NiCd batteries and AMP irreversible battery connector.

Circular 1w LED Non Maintained Emergency Light Fitting. This 1w emergency light fitting is 220 - 240v, 50/60 Hz, 3hr emergency duration, 24hr recharging time and a 3.6v, 1.5 AH battery.

This is an 240v, 28w, 2D 4 Way Wilson Fitting White Base/Opal Diffuser. It is powder coated steel and also has a 3 hr emergency back-up available Electronic ballast. D ia: 435 x D: 110mm. The lamp is not included with this.

400W SON Flood Light all lights are die-cast aluminium, mearsurments: Length 428mm Width 423mm Depth 139mm.(Does not come complete with lamp)

30w IP65 Rated LED Floodlight complete with PIR sensor - Cool White. This 30w floodlight replaces a 100w halogen floodlight, it has a 50,000 hour life span, 100 degree beam angle, 2400 lumen output pir, photocell, high powered chip, rugged construction, matt black finish and a die cast aluminium housing.This light also comes with a 2 year guarantee.

The Philips HID-PV m 1x020/S Low Power Factor minature ballast runs 1x20w metal halide lamps.this ballast is for use in luminaire,smallest gear available, minimal lamp power spread, microprocessor controlled, lamp end of life detection, long lifetime of 40,000 hours, lamp life is increased by up to 30% for CDM lamps, silent operation without hum it is also RoHS compliant. This Philips HID-PV is usually used in accent and decorative lighting for shops and retail, public spaces, lobbies and offices. This unit is designed for optimum system performance with Philips MASTERcolour CDM lamps.

Venture V150SSB255 is a terminal block version Ventronic electonic ballast.This ballast runs 1 x 150w Metal Halide lamp. This ballast has a metal base and enclosure, 2.5mm terminal block, microprocessor controlled, remotely operated up to 25m, accepts 0.75mm to 2.mm solid stranded cable and this ballast operates ceramic metal halide, quartz metal halide and and HPS lamps.

The Philips HID-PV m 35 /C /C Independent electronic ballast comes complete with strain relief and runs 1x35w metal halide lamps.this ballast is available as independent (/I) for independent use on a (false) ceiling, minimal lamp power spread, microprocessor controlled, lamp end of life detection, long lifetime of 40,000 hours, lamp life is increased by up to 30% for CDM lamps, silent operation without hum it is also RoHS compliant. This Philips HID-PV is usually used in accent and decorative lighting for shops and retail, public spaces, lobbies and offices. This unit is designed for optimum system performance with Philips MASTERcolour CDM lamps.

The Philips HID-PV m 1x020 Independent Low Power Factor electronic ballast comes complete with strain relief and runs 1x20w metal halide lamps.this ballast is available as independent (/I) for independent use on a (false) ceiling, minimal lamp power spread, microprocessor controlled, lamp end of life detection, long lifetime of 40,000 hours, lamp life is increased by up to 30% for CDM lamps, silent operation without hum it is also RoHS compliant. This Philips HID-PV is usually used in accent and decorative lighting for shops and retail, public spaces, lobbies and offices. This unit is designed for optimum system performance with Philips MASTERcolour CDM lamps.

The Philips HID-PV m 1x035/l Independent Low Power Factor electronic ballast comes complete with strain relief and runs 1x35w metal halide lamps.this ballast is available as independent (/I) for independent use on a (false) ceiling, minimal lamp power spread, microprocessor controlled, lamp end of life detection, long lifetime of 40,000 hours, lamp life is increased by up to 30% for CDM lamps, silent operation without hum it is also RoHS compliant. This Philips HID-PV is usually used in accent and decorative lighting for shops and retail, public spaces, lobbies and offices. This unit is designed for optimum system performance with Philips MASTERcolour CDM lamps.

Venture HSP40222BD Parmar Ballast is a 60hz ballast suitable for use with High Pressure Sodium, Ceramic Metal Halide and Metal Halide lamps.This ballast runs 1 x 400w lamp. This ballast has a metal base and enclosure, 2.5mm terminal block, microprocessor controlled, remotely operated up to 25m, accepts 0.75mm to 2.mm solid stranded cable.

Venture HSV41322221 Parmar Ballast is a 50hz ballast suitable for use with Metal Halide lamps.This ballast runs 1 x 400w lamp. This ballast has a metal base and enclosure, 2.5mm terminal block, microprocessor controlled, remotely operated up to 25m, accepts 0.75mm to 2.mm solid stranded cable.