A set of plastic coated steel frames which tread into the ground like a fork. Eight letter set for a 20 metre x 40 metre arena (A, B, C, E, F, H, K and M). Dimensions 69cm high, 23cm wide.

A set of dressage markers to fix against an arena wall or fence. Eight letter set for a 20M x 40M arena. Letters A, B, C, E, F, H, K and M.Dimensions 24cm x 24cm

A flag to add a completed look to your marker poles.

A pair of jump cups designed to fit a plank.

A pair of plastic coated, steel jump cups complete with pins. For posts up to 67mm wide.

Designed so that the cup falls away from the adaptor when 140Kg of pressure or above is applied. The safety adaptor must be mounted with the open edge facing down to allow the cup an pole to fall away. Sold singularly.Safety Jump Cup System. From April 2005 the BSJA have ruled that safety jump cups (CODE 40616) are mandatory in the showjumping arena (not the collecting ring) for supporting the back and centre poles of spread fences

New style clip on cups that are easy to lock even for juniors and do not become clogged when used on sand based arenas

Give your course that professional look. The poles can be used to hold polyflags or polydiscs.Heights above ground are Small 45cm Medium 75cmLarge 150cm Polyflags available on code 40409)Polydiscs available on code 40410

A set of plastic coated metal numbers to give your jumping course that professional look. They’re easy to secure by treading into any soft surface and are quick to remove by the handle at the top.Height 40cm.

These metal, plastic coated markers will add a finishing touch to your jumping course. They are easy to tread into any soft surface and are quick to remove by the top handle.

Adhesive numbers to stick to disc markers, ideal for quick course changes.

Adhesive arrows to be stuck to poly discs, easy to change about and ideal for course directions.

Two-tone colourful plastic sleeve, giving plain poles a professional look. Just unroll and slide over. Sold singularly.Colours available are Royal Blue/White and Yellow/White.

Make your own jump planks with this plastic coated metal fitting. Fits timber 38mm thick. Fixed with two screws or two small bolts (not included). One pair.

Provides a simple access point to your field, paddock or stable. The third bracket allows the rail to be slid into it when not in use and then pulled back across the entrance when required, rather than dropping the entire rail on the floor.Three bracket setProvides simple access to your field, paddock or stableFor rails up to 125mm x 75mmComplete with securing pin

Instantly removable from the plastic coated sockets, they can also be interchanged with straight bar door grilles and mesh grids as requirements dictate.Small - 61x91cm. Large - 76x105cm

Simple drop in section of zinc plated steel constuction. For use with anti weaver grill, 42109.

Strongly constructed, heavy duty zinc plated grille designed to adapt to the most popular stable sizes, or to provide limited openings between stables.Intended to fit on top of wooden or masonry walls.22mm diameter tubular bars set at 54mm gaps. 75mm wide steel top and bottom,Small 76cm tall x 122cm longLarge 76cm tall x 183cm long

Heavy duty zinc plated steel grille with close fitting rails for extra safety.

Beneficial for containment in narrow passages and for younger or aggressive horses. Zinc plated rods and flat steel, powder coated sockets.Small = 61cm tall x 89cm wideLarge = 76cm tall x 104cm wideBar spacings 8.5cm