Cooler bag,

A zebra design lunch bag with a glittery horse print to the front.

These are Practical Gloves by Pro Climate and are Perfect for Fishing, Shooting and Hunting.*Adjustable Velcro Wrist Strap*Reinforced Split Fold Back Forefinger and Thumb*Textured Palm and Finger Service For Better Grip*Light Weight Machine Washable 100% Polyester

Suitable for long fences. Has reinforced edges. 40 mm Tape has 4. x 0.3 mm SS conductors + 9 x 0.2 mm SS Conductors + 2 x 0.25 Copper conductors. Resistance 0.15 Ohm / m. UV protectected. BS230kg.40mm x 200m.

Suitable for long fences. Has reinforced edges. 40 mm Tape has 4. x 0.3 mm SS conductors + 9 x 0.2 mm SS Conductors + 2 x 0.25 Copper conductors. Resistance 0.15 Ohm / m. UV protectected. BS230kg.20mm x 200m

The copper conductors reduce the resistance in the tape and so can increase the life of your battery between charges or allow you to run a longer fence.12.5mm x 200m.Reinforced edges.12.5 mm Tape has 5. x 0.2 mm SS conductors + 2 x 0.25 Copper conductors. Resistance 0.27 Ohm / m. UV protected. Breaking Strain 95kg.

A universal insulator for all ropes and twines. Pack of 25.

This is a fencing tape gate insulator. A unique threaded screw design helps minimise any wood splitting. It has two solid anchors, one to fasten the tape or rope around to maintain the circuit and the other hooked end which is suitable for gate handles with hook or loop. * Simple and easy* Screw to post* Unique screw thread* For tapes and ropes* Sold individuallyHere are the Top Ten rules to make your electric fence work properly!1 Keep your fence as free from growth as possible – Growth impairs the output of every commercial appliance and results in increased power consumption, especially with battery-driven appliances.2 Make sure that the earthing is optimal.3 Do not connect two conductive plastic wires by tying them – Use special conductors.4 Fence wire/tape/rope must not be broken.5 Use conductive material having the best possible conductivity – i.e. Low resistance.6 Keep fence wire and earthing rod free from rust – Rust is an insulator.7 Weather-beaten or nagged insulators are unsuitable – Causes a high loss of output.8 Ensure connection between the energiser and wire is optimal – Use cable resistant to high voltage for underground feeds.9 With battery-driven energisers, check battery condition regularly.10 Ensure that each point of the fence is live using an electric fence tester

Features tensioning spring

Integral screw-in insulator for tapes up to 40 mm and rope/twine to 6mmPack of 30

This gate connector is made of UV stabilised plastic with strong insulation qualities. Features rotating and long-lasting compression spring. Suitable for high-powered fencers. Hook on one end for gate closing. Clamp attachment on other end that can grip all sizes of rope or twine. * Strong insulation qualities* Rotating, long lasting compression spring* Good for high powered fencers* Hook on one end* Clamp to grip all sizes of rope or twineHere are the Top Ten rules to make your electric fence work properly!1 Keep your fence as free from growth as possible – Growth impairs the output of every commercial appliance and results in increased power consumption, especially with battery-driven appliances.2 Make sure that the earthing is optimal.3 Do not connect two conductive plastic wires by tying them – Use special conductors.4 Fence wire/tape/rope must not be broken.5 Use conductive material having the best possible conductivity – i.e. Low resistance.6 Keep fence wire and earthing rod free from rust – Rust is an insulator.7 Weather-beaten or nagged insulators are unsuitable – Causes a high loss of output.8 Ensure connection between the energiser and wire is optimal – Use cable resistant to high voltage for underground feeds.9 With battery-driven energisers, check battery condition regularly.10 Ensure that each point of the fence is live using an electric fence tester.

An all over Equine Grooming Shampoo, blended from the finest natural tea tree essential oil, surfactant and conditioning ingredients.

For all the dirty horses and ponies in the world, who would really like to be clean and smart, NAF have created this fabulous shampoo which not only cleans deeper and shines brighter, it smells wonderful too! So to make your show horse showier, your black horse blacker, your white horse whiter and all others in between simply more dazzling, just add Show Off to your water and work up the suds! The results will be DAZZLING! Directions for Use: Add 20ml Show Off shampoo per litre of water, or apply directly to wet coat. Work into a lather, avoid eyes, for a deep conditioning wash and rinse well.

For all dirty ponies who want to clean up and stand out from the crowd, NAF have created this perfect pink shampoo which not only smells fab it cleans deeper and shines brighter. So, to pimp up your pony, add Pimp My Pony Shampoo to your water and work up the suds! Give your pony the wow factor and prepare to be DAZZLED! Directions for Use: Add 20ml Pimp my Pony shampoo per litre of water, or apply directly to wet coat. Work into a lather, avoiding eyes, for a deep conditioning wash and rinse well.

100% natural insect repellent for use against blood sucking and biting lice. Designed for direct application to horses and cattle. Suitable for use in organic farming systems. One application remains active for up to six weeks depending on weather conditions. Note: Efficacy will be affected if used in conjunction with chemical based products. HSE 8712

Heavy Duty drop forged , with hardened and tempered head. Cushion grip.10.75 / 27cm

The bottom LH, square top half stable door is manufactured using a ledged & braced structure, with a 22mm planed tongue and groove redwood boarding and lined with 11mm OSB, giving a total thickness of 70 mm.The door is then dipped into a tank with a solvent based golden brown treatment for maximum protection.If an Anti Chew Strip is required see our item code 42238

This treated LH top door has a 12 mm planed redwood tongue and groove face boarding with no inner lining.The frame is 45 mm deep with top and bottom being 12 cm wide. The cross brace is 60 mm wide and edge strips 30 mm wide.

The bottom LH, square top half stable door is manufactured using a ledged & braced structure, with 22mm planed tongue and groove redwood boarding and lined with 11mm OSB, giving a total thickness of 70 mm.The door outer tongue and groove is then brush coated with a solvent based golden brown treatment.This gives a lighter appearance than being dipped. The inner OSB lining is not coated.If an Anti Chew Strip is required see our item code 42238

This untreated LH top door has a 12 mm planed redwood tongue and groove face boarding with no inner lining.The frame is 45 mm deep with top and bottom being 12 cm wide. The cross brace is 60 mm wide and edge strips 30 mm wide.