
6.49 £
A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black a...

22.95 £
Letter punches are used for hand marking metals and other hard materials. They are useful for stamping personal identification or post codes on tools, cycles etc., as frequently recommended by police and insurers. The letter sizes as shown, ...

8.49 £
A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black a...

13.95 £
Designed to drive nail heads below the surface of the wood. Square head for large striking area which also stops the punch from rolling off the bench. Knurled body with hardened, slightly cupped head. Set of 4 in wallet. 1 ...

8.49 £
A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black a...

11.95 £
A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black...

9.95 £
High grade steel tip and hardened point. Chrome plated knurled brass body....

40.95 £
Letter punches are used for hand marking metals and other hard materials. They are useful for stamping personal identification or post codes on tools, cycles etc., as frequently recommended by police and insurers. The letter sizes as shown, ...

9.95 £
These punches are made from uniformly heat treated carbon steel and are used for removing pins in parallel holes. The removal of the pins should first be started with a hand or taper punch to avoid damage to the end of the parallel punch. ...

25.95 £
Long series pin punch with extended parallel pin, used for the removal of tight pin and metal dowels from mechanical fittings and machinery. Designed for heavy-duty use and are made from uniformly heat treated tool steel with a round head an...

104.95 £
A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black a...

2.95 £
Nail punch with a square head which provides a larger striking area and stops the punch rolling off the bench. Accurately hardened and tempered with a precision formed concave tip for better nail contact. Designed to drive nail heads below t...

17.49 £
A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black a...

6.95 £
SB-37S3N series centre punches made from vanadium steel with a hexagonal shank. Fully polished steel surfaces and a brilliant chrome finish. Size : 6mm (1/4 in). Length : 150mm (6 in). ...

2.95 £
A hardened and tempered parallel pin punch used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch. Size 8mm (5/16 in). ...

4.95 £
Expert Quality , chrome vanadium steel hardened and tempered with a chemically blacked finish. Soft grip handle for user comfort. Display packed in plastic holder....

13.95 £
Hardened, tempered and fully polished Chrome Vanadium steel punches. Supplied with composite chisel retainer. Contents : Ø2 x 9.5 x 115, Ø3 x 9.5 x 125, Ø4 x 9.5 x 150, Ø5 x 9.5 x 165, Ø6 x 12 x 180, Ø8 x 12 x 180mm, Retaining Clip...

27.95 £
Hardened, tempered and fully polished Chrome Vanadium steel punches. Supplied in tool roll. Type : Metric Contents : Ø3, Ø4, Ø5, Ø5.5, Ø6, Ø7, Ø8, Ø10, Ø12mm, Tool Roll...

12.95 £
Wad punches are used for cutting holes in soft materials or for producing discs from the material being cut. One piece forging with ground and polished tapered section. Size 21mm (13/16 in) ...

3.95 £
Drift punch Features : Hardness 48-56 HRC for diameters 2 to 4 mm and 50-58 HRC for diameters 5 to 8 mm - One-piece for more strength and longer life Specifications : Length : 152mm Weight : 85g Diameter : 8mm...