Set contents : 7 piece punch set Sizes : 2 - 10mm...

Feature : Hexagonal shank, high-strength steel tip, hardened to 52-58 HRc Specifications : Diameter : 4mm Overall Length : 135mm Weight : 65g...

Type 117 Centre punches are manufactured from specially selected steel, hardened and properly tempered. They are well proportioned, nicely finished and have a knurled finger grip. The points are ground at the proper angle to give maximum serv...

Well proportioned, hardened and tempered with knurled finger grip. Length 100mm (4 in) Size 8mm (5/16 in) ...

A 6-piece pin punch set of the following sizes : - 1.5, 3, 4, 5, 6, and 8mm (1/8, 5/32, 3/16, 1/4, 5/16,in). Quality chrome vanadium steel gives increased strength and durability, for retained accuracy when marking out centre lines , hole locations ...

Carbon steel body with spring loaded centring pin. Suitable for cutting gasket material or cork, leather etc. Supplied in storage case with nine dies. Contents : Dies 5, 6, 8, 10, 12.5, 16, 20, 25, 32mm, Punch...

Letter and number punches are used for hand marking metals and other hard materials. They are useful for stamping personal identification or post codes on tools, cycles etc., as frequently recommended by police and insurers. The letter or nu...

Letter and number punches are used for hand marking metals and other hard materials. They are useful for stamping personal identification or post codes on tools, cycles etc., as frequently recommended by police and insurers. The letter or nu...

Expert Quality , chrome vanadium steel hardened and tempered with a chemically blacked finish. Soft grip handle for user comfort. Display packed in plastic holder....

This hollow punch is made from carbon steel and has a ground tapered section with a milled clearway for removing waste materials. It is intended for cutting soft materials such as leather. ...

Wad punches are used for cutting holes in soft materials or for producing discs from the material being cut. One piece forging with ground and polished tapered section. Size 8mm (5/16 in) ...

Wad punches are used for cutting holes in soft materials or for producing discs from the material being cut. One piece forging with ground and polished tapered section. Size 6mm (1/4 in) ...

High carbon steel, hardened and tempered for strength and durability. Accurately ground for a precise fit and damage free pin driving...

A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black a...

Expert Quality , special air hardened chrome vanadium steel for long life. The tips are accurately ground, with specially tempered head. Supplied complete in steel magazine type case. Contents : Tip diameters of 2, 3, 4, 5, 6 and 8...

A quick and easy way to cut clean square holes in sheet metal up to 16 gauge. The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti...

A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black a...

A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black a...

These punches are made from uniformly heat treated carbon steel and are used for removing pins in parallel holes. The removal of the pins should first be started with a hand or taper punch to avoid damage to the end of the parallel punch. ...

Keys to suit Q-Max sheet metal punches. Hexagon key to fit 52mm to 80mm Q-Max sheet metal punches. Type. ME. Size. 14mm long arm. ...