Powerful (740kg) industrial punch machine with 4-interchangeable punches. 8 mm opening. Adjustable depth stop up to 43 mm. For use in industrial maintenance including roofing, slates, metalworking, false ceilings, leather work and...

Drift punch Features : Hardness 48-56 HRC for diameters 2 to 4 mm and 50-58 HRC for diameters 5 to 8 mm - One-piece for more strength and longer life Specifications : Length : 152mm Weight : 75g Diameter : 6mm...

Hardened and tempered heavy-duty punch. Manufactured from Chrome Vanadium steel with polished tip. Pin Size : 3mm Length : 200mm...

This hollow punch is made from carbon steel and has a ground tapered section with a milled clearway for removing waste materials. It is intended for cutting soft materials such as leather. ...

This hollow punch is made from carbon steel and has a ground tapered section with a milled clearway for removing waste materials. It is intended for cutting soft materials such as leather. ...

A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black...

Designed to drive nail heads below the surface of the wood. Square head for large striking area which also stops the punch from rolling off the bench. Knurled body with hardened, slightly cupped head. Size. 3/16 in. Length 4 ...

Type 117 Centre punches are manufactured from specially selected steel, hardened and properly tempered. They are well proportioned, nicely finished and have a knurled finger grip. The points are ground at the proper angle to give maximum serv...

SB-373N series parallel pin punches made from vanadium extra steel with a hexagonal shank. Fully polished steel surfaces and a brilliant chrome finish. Length : 150mm (6 in). Size : 5mm (3/16 in). ...

SB-3732 series nail punches are manufactured with a plastic handle and fully polished steel surface with a brilliant chrome finish. Tip size : 2.0 mm (5/64in). Length : 125 mm (5in). ...

Chromed brass barrel with spring loaded tip and depth adjustment on driver ball. Length : 135mm...

Knurled brass barrel with spring loaded alloy steel point. Length : 125mm...

Hexagonal bodied punches with extra long pins. Used for driving out long retaining pins. The pin should be first started with a hand or taper punch to avoid damage to the point of the pin punch. Pin length 63mm (2 1/2 in) Overa...

A hardened and tempered parallel pin punch used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch. Size 5.5mm (7/32 in). ...

A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black a...

A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black a...

Wad punches are used for cutting holes in soft materials or for producing discs from the material being cut. One piece forging with ground and polished tapered section. Size 10mm (3/8 in) ...

Wad punches are used for cutting holes in soft materials or for producing discs from the material being cut. One piece forging with ground and polished tapered section. Size 24mm (15/16 in) ...

Center punch Features : Hardness 50-58 for the punch zone and 34-44 for the tip - One-piece for more strength and longer life Specifications : Diameter : 2.50mm Length : 102mm Weight : 51g...

A comfortable Dynagrip sleeve surrounds a fully hardened body, which is precision milled for extra long life. The overall length is 25% longer than conventional nail punches, making it easy to set nails in hidden and hard to reach areas.