Set of 6 drift punches Features : 6 drift punches 2 to 8 mm Specifications : Weight : 970g...

Drift punch Features : Hardness 48-56 HRC for diameters 2 to 4 mm and 50-58 HRC for diameters 5 to 8 mm - One-piece for more strength and longer life Specifications : Length : 152mm Weight : 55g Diameter : 5mm...

Center punch Features : Hardness 50-58 for the punch zone and 34-44 for the tip - One-piece for more strength and longer life Specifications : Length : 127mm Weight : 100g Diameter : 10mm...

Hexagonal bodied punches with extra long pins. Used for driving out long retaining pins. The pin should be first started with a hand or taper punch to avoid damage to the point of the pin punch. Pin length 63mm (2 1/2 in) Overa...

A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black a...

A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black a...

Extra long pin punch. Hardened and tempered with a knurled grip. The drive pin sections are 90mm (3 1/2 in) long and the diameters of the punches are slightly under the sizes listed. Length : 200mm (8 in) Set of all sizes in case : 3mm (1...

Extra long pin punch. Hardened and tempered with a knurled grip. The drive pin sections are 90mm (3 1/2 in) long and the diameters of the punches are slightly under the sizes listed. Length : 200mm (8 in) Size 9.5mm (3/8 in) ...

Pin punch Quality chrome vanadium steel increased strength and durability for retained accuracy when marking out centre lines , hole locations and pilot drill starting points. Quenched and tempered to precise specifications. Size : 140 ...

A hardened and tempered parallel pin punch used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch. Size 1.6mm (1/16 in). ...

A hardened and tempered parallel pin punch used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch. Size 4.0mm (5/32 in) ...

Expert Quality , chrome vanadium steel hardened and tempered with a chemically blacked finish. Soft grip handle for user comfort. Display packed in plastic holder....

A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black...

Wad punches are used for cutting holes in soft materials or for producing discs from the material being cut. One piece forging with ground and polished tapered section. Size 35mm (1 3/8 in) ...

Feature : Hexagonal shank, high-strength steel tip, hardened to 52-58 HRc Specifications : Diameter : 2mm Overall Length : 105mm Weight : 30g...

Features : Simply press the end to release spring impact - Impact adjustable from 15 to 25 kg by turning the end - Ergonomic Facom handle - Tip hardened to 57-60 HRc Specifications : Weight : 175g...

A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black...

Long pattern 90mm parallel drive....

Centre punch with a square head which provides a larger striking area and prevents the punch rolling when laid on the bench. Carefully hardened and tempered and with a 90° ground point. Point Diameter : 1.5mm (1/16 in) Length : 100m...

Square section striking head with knurled body and polished end. Manufactured from carbon steel hardened and tempered....