50.95 £
Decorative panel mould cutter for raised panelling or edge moulding. Dimensions : Diameter : 25mm Diameter : 10mm Cutting Length : 9.5mm Cutting Radius : 3.2mm Shank Diameter : 1/4 inch Please note that prices in the Trend Cata...
71.95 £
This Raised Panel cutter runs best at lower speeds between 12,000 and 18,000 RPM. Matches our range of profile scribers. Suitable for use on natural timber and MDF. When joining sections to produce solid wood panels, alternate the growth r...
48.95 £
Decorative classic panel mould cutter for raised panelling or edge moulding. Dimensions : Diameter : 19mm Cutting Length : 12.7mm Cutting Radius 1 : 4mm Cutting Radius 2 : 5mm Shank Diameter : 1/4 inch Please note that prices i...
43.95 £
Ideal for following templates for panelling and profiling in furniture manufacture. It is advisable that the template is at least 5mm thicker than the cut length of the cutter. Complete with one bearing. Dimensions : Diameter : 22mm ...
43.95 £
Shank mounted bearing follows template mounted on board surface. It is advisable that the template is at least 5mm thicker than the cut length of the cutter. Complete with one bearing. Dimensions : Diameter : 22mm Cutting Length : 12....
67.95 £
Shape approximately equivalent to Ref. 18/83X1/2TC. Suitable panel mould for use with Ref. PSC/1,PSC/2, PSC/10 and PSC/20X1/2TC. Ideal for use when no variable speed facility is available or when shaped work is not required. When used in a ...
19.95 £
One flute. Eccentric single flute cutter. Cutter is chosen for fast free cutting, when cutting speed takes preference over finish. The depth of cut should be a maximum of 1.0mm per pass. Must not be used in eccentric chucks. This cutte...
21.95 £
One flute. Eccentric single flute cutter. Cutter is chosen for fast free cutting, when cutting speed takes preference over finish. The depth of cut should be a maximum of 1.0mm per pass. Must not be used in eccentric chucks. This cutte...
26.95 £
One flute. Eccentric single flute cutter. Cutter is chosen for fast free cutting, when cutting speed takes preference over finish. Must not be used in eccentric chucks. Dimensions : Diameter : 6mm Cutting Length : 19mm Shank Dia...
8.95 £
One flute. Eccentric single flute cutter. Cutter is chosen for fast free cutting, when cutting speed takes preference over finish. Must not be used in eccentric chucks. Dimensions : Diameter : 7/32 inch Diameter : 5.5mm Cutting ...
22.95 £
One flute. Eccentric single flute cutter. Cutter is chosen for fast free cutting, when cutting speed takes preference over finish. Must not be used in eccentric chucks. Dimensions : Diameter : 5/16 inch Diameter : 7.9mm Cutting ...
22.95 £
One flute. Eccentric single flute cutter. Cutter is chosen for fast free cutting, when cutting speed takes preference over finish. Must not be used in eccentric chucks. Dimensions : Diameter : 3/8 inch Diameter : 9.5mm Cutting L...
83.95 £
Flat Roman Ogee, for raised panelling or edge moulding. Used for decorative capping on hand rails. For stationary machines - 18000 RPM recommended speed. Dimensions : Diameter : 50mm Cutting Length 1 : 6.5mm Cutting Length 2 : 11.5mm C...
38.95 £
Trend Collet For Bosch Gof1300Ace 8mm (Collets / 8mm) 8mm collet and nut. Dimensions : Bosch GOF1300ACE Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed ...
35.95 £
Trend Collet Set Gof1300 1/4 (Collets / 1/4 Inch) 1/4 inch collet collet and nut. Dimensions : Bosch GOF1300ACE Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those...
23.95 £
A router drilling tool to create a radius pip or dome in timber. Useful for carvings. Dimensions : Diameter : 8mm Cutting Length : 9mm Cutting Radius : 2mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue ...
16.95 £
TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. With Solid Carbide insert rather than brazed tip. Dimensions : Diameter : 5/32 inch Diame...
17.95 £
TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. Dimensions : Diameter : 1/4 inch Diameter : 6.3mm Cutting Length : 19mm Shank Diameter : ...
17.95 £
TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. With Solid Carbide insert rather than brazed tip. Two flute cutter specifically designed for inla...
20.95 £
TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 1/2 inch Diameter : 12.7mm Cutting Length : 25mm...
