Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. Teflon coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board....

Expert Quality , for use with routers. Suitable for cutting 400 to 700mm wide worktops 22.5°, 45° and 90° mitres 20, 40 and 100mm radius slots 90° mitre joints helps with chamfered cuts and Supplied with four nylo...

Trend Collet New Type 1/4 (Collets / 1/4 Inch) 1/4 inch collet capacity. Dimensions : Bosch PKF25, POF52, POF400, POF500A, POF600ACE Please note that prices in the Trend Catalogue download, if shown below, may differ to the w...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. Has no centre TC tip and is not suitable for plunging. Dimensions : Diameter=12 mm Cutti...

A two piece cutter set to create a traditional frame and panelled door using a router in a table. The cutters have extra long shanks and can be used in natural timber. Supplied in a wooden box with instructions Dimensions : Profile scr...

Replacement location bush for the COMBI66, COMBI651 & COMBI1002 Dimensions : Overall length 45mm Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalog...

Heavy duty mitre fence for use with router tables, saw benches and band saws. Has a cast alloy protractor body angled -30 degrees, 90 degrees and +30 degrees. The scale is marked a pitch of 5 degrees, with a 1 degree setting on on the location sca...

Should be used with a router of minimum power rating of 750 watts. It should be fitted in a router table which has an adjustable backfence and a mitre fence or workholding jig attachment. With an instruction booklet on constructing frame and pa...

This two wing self-guiding Tungsten Carbide Tipped slotting cutter is ideal for biscuit jointing. The set is supplied with three ball bearing guides to suit the three sizes of biscuits available. A slightly longer cut than the length of the bis...

This cove style cutter with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of passes. Dimensions : Diameter=1 inch Diameter=25.4 mm Cutting Length : 5/8 inch Cutti...

A four piece router cutter pack for use by kitchen fitters. The pack comprises of two worktop cutters C153DX1/2TC, one long series cutter C164X1/2TC and one laminate trimmer C116X1/4TC. Cutters are tungsten carbide tipped with a teflon coating and...

Thumb knob male for the T10 router. Dimensions : M6 X 15mm Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend List Prices excluding VAT...

A pin guided recessing cutter to create counter-bored slots for jig making. For use on MDF, plywood and acrylic. Allows use of M5 andD M6 pan head machine screws & coach bolts Dimensions : Diameter=13 mm Cutting Length : 12 mm Overal...

Jointing block for the VJS/G/100. Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend List Prices excluding VAT....

Self guided trimmer with ball bearings, fitted to both shank and nose. Allowing templates to be placed either on top or bottom of the material. Dimensions : Diameter=19.1 mm Cutting Length : 50 mm Bearing Diameter : 19.1 mm Shank Diam...

A four piece router cutter pack for use by kitchen fitters. The pack comprises of two worktop cutters C153DX1/2TC, one biscuit jointer C152X1/2TC and one laminate trimmer C116X1/4TC. Cutters are tungsten carbide tipped with a teflon coating and ca...

Replacement screw for the rota-tip cutters. Dimensions : M3.5 X 5mm dome head Torx Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend L...

A 3mm spacer pack for use with the Hinge jig to allow it to be used on architrave that is set back by 4mm. Easy to retro fit to existing hinge jigs and allows for new style architectural designs. Supplied with fixing screws Please note that...

Self-guiding cutter for rounding over edges, without the need for a side fence. If cutter is lowered, a top quirk can be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. D...

A self guiding laminate trimmer with a nose mouted bearing. Dimensions : Diameter=18.2 mm Cutting Length : 14 mm Overall Length : 59 mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue download, if shown ...