Replacement Solid Carbide blades. Supplied in a protective plastic box. Dimensions : Length = 30.0mm Width = 12.0mm Thickness = 1.5mm Quantity = 10 Please note that prices in the Trend Catalogue download, if shown below, ...

Features : A unique product which allows access covers for pipes and cables to be installed beneath chipboard floors, using a router - Cuts only the thickness of the board - 250mm diameter opening can be cut and made good in seconds - St...

A unique product which allows access covers for pipes and cables to be installed beneath chipboard floors, using a router. Cuts only the thickness of the board. No waste - the piece cut out is used to make good the floor. Starter kit inclu...

Should be used in a standing drill press, mill, lathe or a CNC drilling machine. Can be used to cut the rosette free to form a button. Dimensions : Rec. speeds : MDF 300 - 3,800RPM Hardwood 300 - 2,000RPM (straight & close grained)

One replaceable Solid Carbide blade. For specialist applications requiring low down-time and economy of a replaceable tip. The single blade can be rotated 180 degrees to give double the life of a conventional tool. Blade is fixed directly ...

One replaceable Solid Carbide blade. For specialist applications requiring low down-time and economy of a replaceable tip. The single blade can be rotated 180 degrees to give double the life of a conventional tool. Blade is fixed directly ...

Two replaceable Solid Carbide blades. For recessing, rebating & housing. Rotate replaceable blades 180 degrees to give increased life Plunge tool with a TC tip brazed into nose. Suitable for plunge cutting. Dimensions : Diameter...

Two replaceable Solid Carbide blades. For specialist applications requiring low down-time and economy of a replaceable tip. Blades can be rotated in 90 degrees increments giving three extra new edges. Trimming of laminates and veneered mate...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. Solid Tungsten Carbide. Greater durability. Better plunge characteristics. Dimensions : ...

Combination pierce and trim cutters. Pierce and cut out apertures in laminate worktops. Base of the cutter acting as a guide follower. Single fluted. Made from solid carbide for long life. Dimensions : Diameter : 6.3mm Cutting...

Cutter for trimming and bevelling timber, lippings and plastic laminate. Can only be used in laminate trimming routers, or when straight fence guides are introduced. Solid tungsten carbide economy cutter. Self-guided trim at 90 degrees.is fo...

For metal, GRP, plastic and wood. Carving, weld removal and drilling hole enlarging. Dimensions : Diameter : 3mm Cutting Length : 13mm Shank Diameter : 3mm Please note that prices in the Trend Catalogue download, if shown below,...

Cutter for non-ferrous metals. For fine finish and long life. Coolants are required when machining aluminium, ie. wax, mist coolant or an air jet. Solid Tungsten Carbide (STC). Use at speed 12000 - 24000 RPM. Dimensions : Diamete...

Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 5- 10m/min of 18000 - 24000 RPM. Ideal for hardwoods and abrasive material such as MDF, veneer finish and laminat...

Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 5- 10m/min of 18000 - 24000 RPM. Ideal for hardwoods and abrasive material. Fine finish. Up-cut prevents bu...

Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 5- 10m/min of 18000 - 24000 RPM. Ideal for hardwoods and abrasive material. Fine finish. Up-cut prevents bu...

Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 5- 10m/min of 18000 - 24000 RPM. Fine finish on both sides of laminated materials, solid timber and veneered boar...

Small diameter shank cutter for CNC routers. Used for specialised applications including signmaking and PCB machining. Dimensions : Diameter : 1.5 mm Cutting Length : 16/64 inch Cutting Length : 5 mm Shank Diameter : 3mm Pleas...

Small diameter shank cutter for CNC routers. Used for specialised applications including signmaking and PCB machining. Dimensions : Diameter : 2.5 mm Cutting Length : 9/32 inch Cutting Length : 7 mm Shank Diameter : 3mm Please...

Small diameter shank cutter for CNC routers. Used for specialised applications including signmaking and PCB machining. Dimensions : Diameter : 2.5mm Cutting Length : 7mm Overall Length : 38mm Shank Diameter : 3mm Please note t...