14.95 £
A lip and spur drill for use in a plunge router in conjuction with the Craft Dovetail jigs with doweling attachment. The drill is tungsten carbide tipped for use on natural timbers and manmade boards. This drill is used for wooden dowels. The s...
3.95 £
Expert Quality , medium carbon steel hardened and tempered with a blacked finish. For use with hand and power tools. Display packed in wallets....
15.95 £
One Bit For Every Job Drills Pracctically Everything Materials that can be drilled are Ceramics ,Tiles ,Eternit ,Plastic ,Aluminium ,Structural steel light building materials ,Wood ,Masonry ,Brick ,Natural stone Concrete
11.95 £
Cuts wooden plugs to fill and cover recessed fixing holes. Use with hard and soft woods only. Cutters have 6mm shank. Contents : 1/4. 3/8, 1/2 and 5/8 cutters...
19.95 £
Bosch Pointed Chisel 250 mm For SDS Machines...
55.95 £
Three high-speed steel double flute step drills. Allows clog-free, precision drilling of eighteen different size holes with just three bits. Supplied in flip-up metal case. Size 1 : 4, 5, 6, 7, 8, 9, 10, 11, 12mm Size 2 : 4, 6, 8, 10, 12, 14,...
12.95 £
A lip and spur drill for use in a plunge router in conjuction with the Craft Dovetail jigs with doweling attachment. The drill is tungsten carbide tipped for use on natural timbers and manmade boards. This drill is used for shelf supports. The ...
12.95 £
A lip and spur drill for use in a plunge router in conjuction with the Craft Dovetail jigs with doweling attachment. The drill is tungsten carbide tipped for use on natural timbers and manmade boards. This drill is used for shelf supports. The ...
40.03 £
This machine bit have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribes give a very clean entrance hole. Not for use on hard den...
41.46 £
This machine bit have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribes give a very clean entrance hole. Not for use on hard den...
41.46 £
This machine bit have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribes give a very clean entrance hole. Not for use on hard den...
29.95 £
This machine bit is designed for recessing circular concealed hinges. The shank has a flat for securing and a grub screw for height adjustment. Use at recommended speeds of 10000RPM. Two flutes, two scribers and a centre point. For veneer...
51.54 £
This machine bit have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribes give a very clean entrance hole. Not for use on hard den...
33.95 £
This machine bit is designed for recessing circular concealed hinges. The shank has a flat for securing and a grub screw for height adjustment. Use at recommended speeds of 10000RPM. Two flutes, two scribers and a centre point. For veneer...
35.95 £
This machine bit is designed for recessing circular concealed hinges. The shank has a flat for securing and a grub screw for height adjustment. Use at recommended speeds of 6000RPM. Two flutes, two scribers and a centre point. For veneere...
48.43 £
This machine bit is typically used by kitchen furniture manufacturers for recessing circular hinges. With scribers is used on veneered and wood finishes. Use at speed range 2000 -12000RPM to avoid burning. Use with pillar drills only.
49.95 £
This machine bit is designed for recessing circular concealed hinges. The shank has a flat for securing and a grub screw for height adjustment. Use at recommended speeds of 6000RPM. Three flutes and three scribers. Specifically for use on...
33.32 £
Made from high grade Carbon Steel and meticulously heat treated. Cuts fast, with the grain or across it. They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll and scalloping operations.
41.46 £
Made from high grade Carbon Steel and meticulously heat treated. Cuts fast, with the grain or across it. They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll and scalloping operations.
59.41 £
Precision made plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307. These have four wings to ensure a clean cut. Use a slow, constant feed rate ensuring timber is clamped to b...
