Wad punches are used for cutting holes in soft materials or for producing discs from the material being cut. One piece forging with ground and polished tapered section. Size 29mm (1 1/8 in) ...

Center punch Features : Hardness 50-58 for the punch zone and 34-44 for the tip - One-piece for more strength and longer life Specifications : Diameter : 4mm Length : 102mm Weight : 53g...

Feature : Hexagonal shank, high-strength steel tip, hardened to 52-58 HRc Specifications : Diameter : 3mm Overall Length : 120mm Weight : 35g...

Feature : Hexagonal shank, high-strength steel tip, hardened to 52-58 HRc Specifications : Diameter : 5mm Overall Length : 150mm Weight : 75g...

Stanley 158501 Fatmax Interchangeable Nail Set with two nail set sizes (1/32 inch and 1/16 inch). Bi-material grip for comfort and reduced slipping. 1/4 inch locking system accepts standard screwdriver bits. ...

Expert Quality , special air hardened chrome vanadium steel for long life. The tips are accurately ground, with specially tempered head. Contents : Tip diameters of 3.0, 3.5, 4.0, 5.0 and 6.0mm....

Expert Quality , manufactured from special air hardened chrome vanadium steel for long life. The tips are accurately ground with specially tempered heads. Manufactured to DIN 6458...

Long pattern 90mm parallel drive....

Long pattern with 90mm parallel drive. Display packed in storage wallet. Contents : 1/8, 3/16, 1/4, 5/16 and 3/8 dia....

A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black a...

A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black...

Centre punch with a square head which provides a larger striking area and prevents the punch rolling when laid on the bench. Carefully hardened and tempered and with a 90° ground point. Point Diameter : 5.0mm (3/16 in) Length : 100m...

Expert Quality , special air hardened chrome vanadium steel for long life. The tips are accurately ground, with specially tempered heads....

Expert Quality , engineer’s pattern long taper punches, manufactured from special air hardened chrome vanadium steel for long life....

Manufactured from Chrome Vanadium steel, hardened and tempered for extra durability. Supplied in tool roll. Contents : Cold Chisels 10 x 140, 13 x 150, 16 x 170, 19 x 175, 22 x 200, 25 x 250mm, Taper Punches 1.5 x 140, 2.4 x 140, 3 x 140, 4 x...

Center punch Features : Hardness 50-58 for the punch zone and 34-44 for the tip - One-piece for more strength and longer life Specifications : Length : 114mm Weight : 86g Diameter : 8mm...

Drift punch Features : Hardness 48-56 HRC for diameters 2 to 4 mm and 50-58 HRC for diameters 5 to 8 mm - One-piece for more strength and longer life Specifications : Length : 152mm Weight : 52g Diameter : 3mm...

Wad punches are used for cutting holes in soft materials or for producing discs from the material being cut. One piece forging with ground and polished tapered section. Size 11mm (7/16 in) ...

Type 117 Centre punches are manufactured from specially selected steel, hardened and properly tempered. They are well proportioned, nicely finished and have a knurled finger grip. The points are ground at the proper angle to give maximum serv...

Type 117 Centre punches are manufactured from specially selected steel, hardened and properly tempered. They are well proportioned, nicely finished and have a knurled finger grip. The points are ground at the proper angle to give maximum serv...