Feature : Hexagonal shank, high-strength steel tip, hardened to 52-58 HRc Specifications : Diameter : 8mm Overall Length : 180mm Weight : 140g...

Feature : Hexagonal shank, high-strength steel tip, hardened to 52-58 HRc Specifications : Diameter : 3mm Overall Length : 170mm Weight : 50g...

Feature : Hexagonal shank, high-strength steel tip, hardened to 52-58 HRc Specifications : Diameter : 6mm Overall Length : 185mm Weight : 90g...

Feature : Hexagonal shank, high-strength steel tip, hardened to 52-58 HRc Specifications : Diameter : 8mm Overall Length : 190mm Weight : 135g...

Feature : Hexagonal shank, high-strength steel tip, hardened to 52-58 HRc Specifications : Diameter : 10mm Overall Length : 195mm Weight : 170g...

Hardened and tempered heavy-duty punch. Manufactured from Chrome Vanadium steel with polished tip. Pin Size : 6mm Length : 250mm...

Hardened carbon steel with gun metal finish for protection. Knurled shaft for grip...

6 piece parallel punch set for a wide range of applications. Punches are made from heavy-duty chrome-vanadium steel. Sizes 1.5, 3, 4, 5, 6 and 8mm. ...

This hollow punch is made from carbon steel and has a ground tapered section with a milled clearway for removing waste materials. It is intended for cutting soft materials such as leather. ...

A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black a...

Letter and number punches are used for hand marking metals and other hard materials. They are useful for stamping personal identification or post codes on tools, cycles etc., as frequently recommended by police and insurers. The letter or nu...

A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black a...

Extra long pin punch. Hardened and tempered with a knurled grip. The drive pin sections are 90mm (3 1/2 in) long and the diameters of the punches are slightly under the sizes listed. Length : 200mm (8 in) Size 6mm (1/4 in) ...

Extra long pin punch. Hardened and tempered with a knurled grip. The drive pin sections are 90mm (3 1/2 in) long and the diameters of the punches are slightly under the sizes listed. Length : 200mm (8 in) Size 8mm (5/16 in) ...

Well proportioned, hardened and tempered with knurled finger grip. Length 100mm (4 in) Size 2.5mm (3/32 in) ...

SB-37S3N series centre punches made from vanadium steel with a hexagonal shank. Fully polished steel surfaces and a brilliant chrome finish. Size : 5mm (3/16 in). Length : 120mm (4 3/4 in). ...

SB-37S3N series centre punches made from vanadium steel with a hexagonal shank. Fully polished steel surfaces and a brilliant chrome finish. Size : 4mm (5/32 in). Length : 120mm (4 3/4 in). ...

A hardened and tempered parallel pin punch used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch. Walleted set of 9 containing one of each...

Hexagonal bodied punches with extra long pins. Used for driving out long retaining pins. The pin should be first started with a hand or taper punch to avoid damage to the point of the pin punch. Pin length 63mm (2 1/2 in) Overa...

Hexagonal bodied punches with extra long pins. Used for driving out long retaining pins. The pin should be first started with a hand or taper punch to avoid damage to the point of the pin punch. Pin length 63mm (2 1/2 in) Overa...