
53.95 £
Extra long self guided trimmer with ball bearing on its nose. Dimensions : Diameter : 3/4 inch Diameter : 19.1 mm Cutting Length : 2 inch Cutting Length : 50 mm Overall Length : 116 mm Bearing Diameter : 19.1 mm Shank Diameter : 1...

44.95 £
Roman ogee with self guiding facility. To change profile use larger bearing and vary the depth. Supplied with two bearings. Dimensions : Diameter : 25.4mm Cutting Length : 16mm Bearing Diameter : 9.5mm & 12.7mm Cutting Radius 1...

51.95 £
Self-guiding cutter with facility to change profile by fitting large bearing & varying the depth. Supplied with two bearings. Dimensions : Diameter : 38mm Cutting Length : 16mm Bearing Diameter : 9.5mm & 12.7mm Cutting Radius : 6mm

29.95 £
For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing t...

44.95 £
Trend B/Guided Cham A=25í X 41mm Dia (Tct Router Cutter Range / Chamfer) Supplied with two bearings. Larger bearing removes quirk. Dimensions : Diameter : 41mm Cutting Length 1 : 5mm Cutting Length 2 : 13mm Bearing Diameter : 12....

46.95 £
Trend B/Guided Cham A=45í X 31.8mm Dia (Tct Router Cutter Range / Chamfer) Supplied with one bearing. Dimensions : Diameter : 31.8mm Cutting Length 1 : 12mm Cutting Length 2 : 16mm Bearing Diameter : 9.5mm Angle : 45 degrees Sh...

71.95 £
A modern skirting and architrave mould. Supplied with two bearings. Dimensions : Diameter : 33mm Cutting Length : 17mm Bearing Diameter : 12.7mm & 16mm Cutting Radius : 4.75mm Angle : 70 degrees Shank Diameter : 3/8 inch ...

94.95 £
Wide combination moulds for edging table tops and shelves. For stationary machines - 16000 RPM recommended speed. Dimensions : Diameter : 58mm Cutting Length : 23mm Bearing Diameter : 12.7mm Cutting Radius 1 : 7.5mm Cutting Radius...

67.95 £
Supplied with one bearing. For stationary machines - 18000 RPM recommended speed. Dimensions : Diameter : 44.8mm Cutting Length : 41mm Bearing Diameter : 19mm Cutting Radius : 12.7mm Shank Diameter : 1/2 inch Please note tha...

86.95 £
Supplied with one bearing. For stationary machines - 18000 RPM recommended speed. Dimensions : Diameter : 50.8mm Cutting Length : 52mm Bearing Diameter : 19mm Cutting Radius : 15.8mm Shank Diameter : 1/2 inch Please note tha...

44.95 £
Self-guiding cutter with facility to change profile by fitting large bearing and varying the depth. Supplied with two bearings. Dimensions : Diameter : 28.5mm Cutting Length : 12.7mm Bearing Diameter : 9.5mm & 12.7mm Cutting Radius...

80.95 £
Self-guiding cutter with facility to change profile by fitting large bearing and varying the depth. Supplied with two bearings. For stationary machines - 18000RPM recommended speed. Dimensions : Diameter : 63mm Cutting Length : 20mm

35.95 £
Trend Bevel Trim A=45í X 27mm Dia (Tct Router Cutter Range / Laminate Trimmers) Cut a wider edge line, at an angle of 45 degrees. A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting edges.

77.95 £
Simultaneously rounds over and profiles the edge. Ideal for pencil round architrave. Dimensions : Diameter : 36mm Diameter : 16mm Cutting Length : 29mm Bearing Diameter : 16mm Cutting Radius : 10mm Shank Diameter : 1/2 inch

76.95 £
Cutter supplied with two bearings. Larger bearing removes the quirk producing a round over profile. For stationary machines - 16000 RPM recommended speed. Dimensions : Diameter : 57.1mm Cutting Length : 30mm Bearing Diameter : 9.5m...

43.95 £
Combination pierce and trim cutters. Pierce and cut out apertures in laminate worktops. Base of the cutter acting as a guide follower. Specially designed for the caravan building industry, used for cutting apertures in windows, doors & the ...

26.95 £
Cutter is designed to plunge and machine or mill lateral slots. Aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. For drilling and slotting, cutting aluminium anodised duralium an...

30.95 £
Cutter is designed to plunge and machine or mill lateral slots. Normal neck, but long shank. Use at speed 10000 - 12000 RPM. Dimensions : Diameter : 6mm Cutting Length : 40mm Overall Length : 100mm Shank Diameter : 8mm Ple...

32.95 £
Cutter is designed to plunge and machine or mill lateral slots. For duralium with long shank. Use at speed 10000 - 12000 RPM. Dimensions : Diameter : 5mm Cutting Length : 40mm Overall Length : 100mm Shank Diameter : 8mm Pl...

22.95 £
Cutter is designed to plunge and machine or mill lateral slots. Aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. For drilling and slotting, cutting aluminium anodised duralium an...