Recessing cutter for producing double rebates. For producing recesses with a lower rebate. Designed to accept library/bookcase strip (Tonk Strip). Dimensions : Diameter : 14mm Diameter : 20mm Cutting Length 1 : 8mm Cutting Length 2 : ...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 9/16 inch Diameter : 14.3mm Cutting Length : 25m...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 9/16 inch Diameter : 14.3mm Cutting Length : 25m...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 33/64 inch Diameter : 13mm Cutting Length : 26mm...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 19/32 inch Diameter : 15mm Cutting Length : 25mm...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 3/4 inch Diameter : 19mm Cutting Length : 50mm

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 25/32 inch Diameter : 20mm Cutting Length : 25mm...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 61/64 inch Diameter : 24mm Cutting Length : 19mm...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. TCT centre tip. For stationary machines - max. 18000 RPM recommended speed. Dimensions : Diameter : 1 7/8 inch Diam...

This lip and spur dowel drill features Solid Carbide cutting tips, for continuous drilling of tear free dowel holes. Shank has one flat for positive holding. A threaded grub screw in the shank end allows for correct setting for a bank of drills...

This lip and spur dowel drill features Solid Carbide cutting tips, for continuous drilling of tear free dowel holes. Shank has one flat for positive holding. A threaded grub screw in the shank end allows for correct setting for a bank of drills...

This lip and spur dowel drill features Solid Carbide cutting tips, for continuous drilling of tear free dowel holes. Shank has one flat for positive holding. A threaded grub screw in the shank end allows for correct setting for a bank of drills...

Cutter for machining acrylic & plastics with low melting point. Two flute for fine finish. Use Trendicote to enhance the cutter life and prevent weld back of material to the tool. Mini-trim with guide bearing will profile intricate shapes.

Trend Combi Trimmer A1=90í X A2=45í (Tct Router Cutter Range / Laminate Trimmers) Self-guided combination trimmer. 90 degree trim is obtained by engaging the bottom half. 45 degree trim is obtained by lowering the cutter. A fine hei...

Profiler with shank mounted bearing for guidance. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should b...

Trend Bevel A=60í X 53mm Dia (Tct Router Cutter Range / Chamfer) Useful for bevelling thick timbers. For jointing, boxes, pilasters and carcassing. For full bevels template should be fixed to component For stationary machines - 18000...

Cutter supplied with two bearings. Larger bearing removes the quirk producing a round over profile. Dimensions : Diameter : 19mm Cutting Length : 9.5mm Bearing Diameter : 9.5mm & 12.7mm Cutting Radius : 3.2mm Shank Diameter : 1/2 ...

Cutter supplied with two bearings. Larger bearing removes the quirk producing a round over profile. Dimensions : Diameter : 34.9mm Cutting Length : 18mm Bearing Diameter : 9.5mm & 12.7mm Cutting Radius : 11.1mm Shank Diameter : 1/...

Self guided with low profile ball bearing. For use in restrictive applications or within rebates of minimum 8mm. Dimensions : Diameter : 3/4 inch Diameter : 19.1 mm Cutting Length : 5/8 inch Cutting Length : 16 mm Bearing Diameter : 1...

Cutter for trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the be...