The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts. Every Faithfull router cutter tip is made from tungsten carbi...

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts. Every Faithfull router cutter tip is made from tungsten carbi...

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts. Every Faithfull router cutter tip is made from tungsten carbi...

Long router bit service life even for plunge cutting because of the soldered standard tungsten carbide blade....

Features : For decorative front design of inlays - With partially ground standard blade suitable for plunge cuts in furniture Specifications : D - 21 mm NL - 12 mm GL - 42 mm R - 5 mm...

Festool ogee cutter with TC shank 12 mm. Features : Because of the large shaft diameter of 12 mm, even large radii can be cut without producing large vibrations Technical data : D - 63 mm NL - 32 mm GL - 82 mm R - 25 mm...

Using this tool, flat cuts and counter profiles can be made. When combined with a disc groover, complete fronts can be produced. Shank 8 mm Technical data : D 42,7 mm NL 13 mm GL 50 mm R 6 mm...

The Freud 4 Piece Kitchen fitters router bit set. Set contents : 12-13050 1x Double flute straight bit 12-12850 2x Double flute straight bit 42-10425 1x Laminate trimmer Storage pouch...

Features & Benefits : &bull Tool-free conversion -- Quick clamp system allows removal of motor from base to base &bull Plunge Lock release level - conveniently located to allow maximum control, springs to locked position for ease of use...

Bosch OFA FSN Guide Rail Adaptor for GOF & GMF Routers. Adapter enables guide rails FSN 70 (2 602 317 030) and FSN 140 (2 602 317 031) to also be used with router....

Secured to the AB-KS crown stop. simple extraction and rolling out of measuring tape thanks to telescopic mechanism Technical data Total length 1280 - 2070 mm Cutting length 380 - 2300 mm...

Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature....

Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature....

Collets designed to fit Dewalt routers. 6.35 mm (1/4in) Collet to fit DEW625EK Router. ...

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts. Every Faithfull router cutter tip is made from tungsten carbi...

Tungsten Carbide Dovetail Cutter designed to be used in conjunction with dovetailing jigs, producing through or lapped dovetails, or dovetailed housings. Suitable for use on softwood, hardwood and all man-made boards. 1/4in Shank 13.2 ...

Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. Teflon coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board....

Expert Quality , for use with routers. Suitable for cutting 400 to 700mm wide worktops 22.5°, 45° and 90° mitres 20, 40 and 100mm radius slots 90° mitre joints helps with chamfered cuts and Supplied with four nylo...

Trend Collet New Type 1/4 (Collets / 1/4 Inch) 1/4 inch collet capacity. Dimensions : Bosch PKF25, POF52, POF400, POF500A, POF600ACE Please note that prices in the Trend Catalogue download, if shown below, may differ to the w...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. Has no centre TC tip and is not suitable for plunging. Dimensions : Diameter=12 mm Cutti...