Two flutes for clean finish. Suitable for plunge routers. Dimensions : Diameter : 25/64 inch Diameter : 10mm Cutting Length : 35mm Shank Diameter : 3/8 inch Please note that prices in the Trend Catalogue download, if shown bel...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 31/64 inch Diameter : 12.55mm Cutting Length : 2...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 1/2 inch Diameter : 12.7mm Cutting Length : 32mm...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 15/32 inch Diameter : 12mm Cutting Length : 19mm...

For use with commercial dovetailing and stair-housing jigs. The cutter will produce sliding and lapped dovetails, through dovetails and end on dovetails. Right hand rotation. Purpose made for stair trenching machines. Dimensions :

Replacement arbor for an 8mm bore tool. Dimensions : Overall Length : 76 mm Shank Diameter : 1/2 inch Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the C...

Replacement arbor for an 8mm bore tool. Dimensions : Overall Length : 76 mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the C...

Replacement arbor for an 8mm bore tool. Dimensions : Overall Length : 76 mm Shank Diameter : 12mm Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catal...

Replacement arbor for the PSC/101X1/2TC. Dimensions : Overall Length : 87 mm Shank Diameter : 1/2 inch Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the ...

Designed to accommodate Schlegel Smokeseal Quick Fit brush strips. The groove is cut in the door edge rather than the frame. Must be used with a side fence. Dimensions : Diameter : 45mm Diameter : 34mm Cutting Length 1 : 2.75mm Cu...

Ensure slotter is fitted the correct way onto the arbor with respect to the direction of rotation. Bearings and slotter should be fitted as near to the shank as possible to avoid vibration. This slotter has a M12 threaded boss to enable it to...

Ensure slotter is fitted the correct way onto the arbor with respect to the direction of rotation. Bearings and slotter should be fitted as near to the shank as possible to avoid vibration. This slotter has a 12mm clear bore. Can be mount...

Ensure slotter is fitted the correct way onto the arbor with respect to the direction of rotation. Bearings and slotter should be fitted as near to the shank as possible to avoid vibration. This slotter has a M12 threaded boss to enable it to ...

To produce grooves for the insertion of coloured or natural wood inlay. Supplied with three bearings to allow different depths of cut. Alternative bearings available. Designed for routing Corian, which is used in many bathrooms and kitchens....

Enables biscuit jointing timber, man-made fibre and particle board with the router. The set includes three sizes of bearing offered for the three sizes of biscuits available. The correct choice of bearing for the biscuit being used, will ensure...

A keyhole recess for picture hanging flush to the wall. No.10 and 12 screw heads. Not suitable for grooving applications. Dimensions : Diameter : 12.7mm Diameter : 8mm Cutting Length : 4.9mm S=4.6mm Shank Diameter : 1/4 inch

Ideal for hiding pipes and cables. Part of curve can be used for producing decorative edges. An initial slot is required before using the ball groovers. Dimensions : Diameter : 12.7mm Diameter : 6.5mm Shank Diameter : 1/2 inch ...

Recessing cutter for producing double rebates. For producing recesses with a lower rebate. Designed to accept library/bookcase strip (Tonk Strip). Dimensions : Diameter : 9.5mm Diameter : 19mm Cutting Length 1 : 13mm Cutting Length ...

Recessing cutter for producing double rebates. For producing recesses with a lower rebate. Designed to accept library/bookcase strip (Tonk Strip). Dimensions : Diameter : 12mm Diameter : 18mm Cutting Length 1 : 10mm Cutting Length 2...

Recessing cutter for producing double rebates. For producing recesses with a lower rebate. Designed to accept library/bookcase strip (Tonk Strip). Dimensions : Diameter : 14mm Diameter : 20mm Cutting Length 1 : 8mm Cutting Length 2 : ...