
21.95 £
Replacement bearing for router cutter. Always check the tightness of the fixing screw before using the cutter. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Dimensions : ...

7.95 £
Replacement bearing for router cutter. Always check the tightness of the fixing screw before using the cutter. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Dimensions : ...

8.95 £
Replacement bearing for router cutter. Always check the tightness of the fixing screw before using the cutter. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Dimensions : ...

4.95 £
Replacement bearing for router cutter. Rubber shielded ball bearing give an improved protection from dust and dirt. Dimensions : IDiameter : 1/4 inch ODiameter : 5/8 inch Thickness=3/16 inch Please note that prices in the Trend...

8.95 £
Replacement bearing for router cutter. Always check the tightness of the fixing screw before using the cutter. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Dimensions : ...

8.95 £
Always check the tightness of the fixing screw before using the cutter. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Dimensions : IDiameter : 3/16 inch ODiameter : 23....

6.95 £
Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Dimensions : IDiameter : 12.0mm ODiameter : 26.0mm Thickness=6.0mm Please note tha...

7.95 £
Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Dimensions : IDiameter : 1/4 inch ODiameter : 28.0mm Thickness=6.0mm Please note that prices in the Trend Catalogue download, if shown be...

8.95 £
Replacement bearing for router cutter. Always check the tightness of the fixing screw before using the cutter. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. With the design...

8.95 £
Replacement bearing for router cutter. Always check the tightness of the fixing screw before using the cutter. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Dimensions : ...

8.95 £
Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Dimensions : IDiameter : 12.0mm ODiameter : 36.0mm Thickness=9.0mm Please note tha...

4.95 £
Replacement bearing for router cutter. Always check the tightness of the fixing screw before using the cutter. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Dimensions : ...

8.95 £
Replacement bearing for router cutter. Always check the tightness of the fixing screw before using the cutter. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Dimensions : ...

4.95 £
Alternate bearing ring for the 46/390X1/2TC, giving a rebate size of 15.1mm. The bearing ring is secured to the cutter by fitting the ball bearing either side and tightening the screw. Dimensions : IDiameter : 12.7mm ODiameter : 20.6mm Reba...

6.95 £
Alternate bearing ring for the 46/390X1/2TC, giving a rebate size of 3.2mm. The bearing ring is secured to the cutter by fitting the ball bearing either side and tightening the screw. Dimensions : IDiameter : 12.7mm ODiameter : 44.4mm Rebat...

8.95 £
Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature....

7.95 £
Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature....

6.95 £
Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature....

11.95 £
Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature....

11.95 £
Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature....