Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature....

Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature....

Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature....

Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature....

For veining, panelling, 'V' grooving, bevelling & chamfering. Dimensions : Diameter : 12.7mm Cutting Length : 11mm Angle : 60 degrees Shank Diameter : 8mm Please note that prices in the Trend Catalogue download, if shown below, m...

For veining, panelling, 'V' grooving, bevelling & chamfering. Dimensions : Diameter : 12.7mm Cutting Length : 6mm Angle : 45 degrees Shank Diameter : 1/2 inch Please note that prices in the Trend Catalogue download, if shown belo...

For veining, panelling, 'V' grooving, bevelling & chamfering. Dimensions : Diameter : 25.4mm Cutting Length : 11mm Angle : 45 degrees Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue download, if shown bel...

This is ideal for engraving and decorative panel work. Made with a Solid Tungsten Carbide insert, with two flutes. Dimensions : Diameter : 6.3mm Cutting Length : 12.7mm Cutting Radius : 3.2mm Shank Diameter : 8mm Please note t...

This cove style cutter with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of passes. Dimensions : Diameter : 12.7mm Cutting Length : 7.9mm Cutting Radius : 6.3mm Sh...

Self-guiding cutter for producing ovolo mouldings, without the need for a side fence. Top quirk can be removed by raising the cutter. Dimensions : Cutting Length : 12.7mm Bearing Diameter : 9.5mm Cutting Radius : 6.3mm Shank Diamete...

Use bearing B127A to remove the quirk. Dimensions : Cutting Length : 12.7mm Bearing Diameter : 9.5mm Cutting Radius 1 : 5mm Cutting Radius 2 : 4mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue downloa...

For producing ovolo and rounding over edge moulds, using a side fence or back fence. Dimensions : Diameter : 15.9mm Cutting Length : 13.5mm Cutting Radius : 6.3mm Shank Diameter : 8mm Please note that prices in the Trend Catalogu...

Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees. Dimensions : Diameter : 26mm D2=22mm Cutting Length : 16mm Bearing Diameter : 15.9mm Cutting Radius : 4.8mm Shank Diameter : 8mm

Pierces, trims & cuts out apertures in laminate worktops. The base of the cutter acts as a guide follower. Dimensions : Diameter : 6.3mm Cutting Length : 18mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalo...

Self-guiding chamfer/bevel cutter. Bearing follows the board beneath. Dimensions : Cutting Length : 12.7mm Bearing Diameter : 9.5mm Angle : 60 degrees Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue do...

This two wing self-guiding Tungsten Carbide Tipped slotting cutter is ideal for biscuit jointing. The set is supplied with three ball bearing guides to suit the three sizes of biscuits available. A slightly longer cut than the length of the bis...

This dovetail cutter produces a tight reliable joint for drawers, boxes etc. Dimensions : Diameter : 5/8 inches Diameter : 15.9 mm Cutting Length : 14 mm Overall Length : 54 mm Angle : 104 degrees Shank Diameter : 1/4 Please ...

This trimmer with a shank mounted bearing, are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cutter breakage. Dimensions : Diameter : 19.1mm Cutting Length : 19.1mm Shank D...

Two fluted Solid Carbide insert straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature.

Two fluted Solid Carbide insert straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature.