
4.80 £
One of the most accurate methods of cutting holes or pockets is by using a hole saw.The tubular body ensures that the hole remains true even after the teeth have broken through. So whether you are installing pipes and cables or making toys or furn...

18.95 £
Trend Snappy Tc C'Bore 6.35mm X 12.7mm (Snappy / Counterbores) Tungsten Carbide tipped for use in abrasive materials. Dimensions : Diameter : 1/2 inch Diameter : 12.7mm Diameter : 6.35mm Shank Diameter : 1/4 inch HEX Pleas...

11.95 £
Tungsten Carbide tipped version of the popular Snappy drill countersink. This tool can be used in abrasive materials such as laminated chipboard. The drills produce pilot holes only. Dimensions : Diameter : 9.5mm Diameter : 2.0mm (5/6...

4.49 £
The HSS drill bit is gripped by a spring steel collet into the hex shaft. The hex shanks snap into the Quick Chuck. Dimensions : Diameter : 1/16 inch Shank Diameter : 1/4 inch Hex Please note that prices in the Trend Catalogue dow...

4.49 £
The HSS drill bit is gripped by a spring steel collet into the hex shaft. The hex shanks snap into the Quick Chuck. Dimensions : Diameter : 4.0mm Shank Diameter : 1/4 inch Hex Please note that prices in the Trend Catalogue downloa...

4.49 £
The HSS drill bit is gripped by a spring steel collet into the hex shaft. The hex shanks snap into the Quick Chuck. Dimensions : Diameter : 3/16 inch Shank Diameter : 1/4 inch Hex Please note that prices in the Trend Catalogue dow...

2.95 £
Adjustable depth stop to fit SNAP/CS/12 diameter. Supplied with a hex key. Dimensions : Suitable for SNAP/CS/12 Supplied with hex key Please note that prices in the Trend Catalogue download, if shown below, may differ to the web...

13.95 £
High quality forged and ground carbon steel short Forstner bit for drilling accurate holes. For use with the Snappy Quick Chuck. Will also drill overlapping holes. Dimensions : Diameter : 22mm Overall Length : 86mm Shank Diameter : ...

18.95 £
High quality forged and ground carbon steel short Forstner bit for drilling accurate holes. For use with the Snappy Quick Chuck. Will also drill overlapping holes. Dimensions : Diameter : 30mm Overall Length : 86mm Shank Diameter : ...

15.95 £
For drilling blind holes for circular hinges in kitchen and cabinet doors. Recommended for use in a drill stand. Dimensions : Diameter : 1 3/8 inch Diameter : 35 mm Cutting Length : 55 mm Shank Diameter : 1/4 hex Please note that...

3.49 £
Tungsten Carbide Tipped masonry drill to suit wall plugs. Dimensions : Diameter : 8mm Overall Length : 142mm Shank Diameter : 1/4 inch hex Please note that prices in the Trend Catalogue download, if shown below, may differ to the w...

7.95 £
High grade tool steel bits, hardened for ultimate wear resistance. The bits have 1/4 inch hex shanks to fit the Quick Chuck. Dimensions : Mixed pack of bits Phillips No.1 Phillips No.2 Phillips No.3 Shank Diameter : 1/4 inch ...

8.49 £
High grade tool steel bits, hardened for ultimate wear resistance. The bits have 1/4 inch hex shanks to fit the Quick Chuck. Dimensions : 3 x Pozidriv No.2 bits Shank diameter - 1/4 inch Hex Please note that prices in the Trend ...

8.49 £
High grade tool steel bits, hardened for ultimate wear resistance. The bits have 1/4 inch hex shanks to fit the Quick Chuck. Dimensions : Overall Length : 150mm Shank Diameter : 1/4 inch Hex Please note that prices in the Trend Ca...

11.95 £
The Snappy system starts with the Quick Chuck. This is fitted into a standard 3/8 inch key or keyless chuck. Six flats on the shank ensure precise location in the chuck. A sprung loaded outer sleeve makes it easy to remove attachments.

14.95 £
The Snappy system starts with the Quick Chuck. This is fitted into a standard 3/8 inch key or keyless chuck. Six flats on the shank ensure precise location in the chuck. A sprung loaded outer sleeve makes it easy to remove attachments. C...

14.95 £
The Snappy system starts with the Quick Chuck. This is fitted into a standard 3/8 inch key or keyless chuck. Six flats on the shank ensure precise location in the chuck. A sprung loaded outer sleeve makes it easy to remove attachments. M...

4.49 £
Square Robertson screwdriver bits. Dimensions : Overall Length : 50 mm Shank Diameter : 1/4 hex Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalog...

16.95 £
For use in torque control screwdrivers on metals and plastics. Dimensions : Tap size=M10 Shank Diameter : 1/4 inch Hex Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as th...

98.95 £
Heavy duty fabric tool holder available with assorted Snappy tools. With elastic pockets to hold Snappy shanks. Supplied with a snappy pencil. Tool holders have a belt strap and are Velcro fastening. Dimensions : Tools up to 155mm=20 ...