
13.95 £
High quality forged and ground carbon steel short Forstner bit for drilling accurate holes. For use with the Snappy Quick Chuck. Will also drill overlapping holes. Dimensions : Diameter : 16mm Overall Length : 86mm Shank Diameter : ...

14.95 £
Snappy shank 50mm long ball end hex bits. For use with both socket head cap and countersunk machine screws. Dimensions : To suit-2mm, 2.5mm and 3mm A/F for M3, M4 and M5 socket screws. Please note that prices in the Trend Catalogue ...

3.49 £
Tungsten Carbide Tipped masonry drill to suit wall plugs. Dimensions : Diameter : 6mm Overall Length : 120mm Shank Diameter : 1/4 inch hex Please note that prices in the Trend Catalogue download, if shown below, may differ to the w...

28.95 £
This set incorporates one of each of the four main lines and is designed for No.8 screw size. Dimensions : Screw size=No.8 Quick chuck Drill countersink No.2 Pozidrive bit Drill bit guide Shank Diameter : 1/4 inch Hex P...

12.95 £
The Snappy system starts with the Quick Chuck. This is fitted into a standard 3/8 inch key or keyless chuck. Six flats on the shank ensure precise location in the chuck. A sprung loaded outer sleeve makes it easy to remove attachments. C...

14.95 £
Comprises magnetic holder and 30 assorted 25mm screwdriver bits in a plastic case with belt clip. Dimensions : 25mm screwdriver bits - 3 x Pozi 3 x Phillips 4 x flats 10 x Torx 7 x hex 3 x square Shank diameter - 1/4 i...

4.49 £
Square Robertson screwdriver bits. Dimensions : Diameter : 3/32 inch Overall Length : 50 mm Shank Diameter : 1/4 hex Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as thos...

10.49 £
Heavy duty fabric tool holder. With elastic pockets to hold Snappy shanks. Supplied with a snappy pencil. Tool holders have a belt strap and are Velcro fastening. Dimensions : Holding capacity=30 pieces Size closeDiameter : 140mm x ...

4.80 £
Replacement plastic case for the SNAP/SE1/SET. Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend List Prices excluding VAT....

7.49 £
Extra long Phillips screwdriver bits For use with Snappy Quick Chuck. Dimensions : Overall Length : 150mm Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the...

2.49 £
Spare drill for the Snappy Counterbore SNAP/CB/1TC. Dimensions : Diameter : 5/32 inch Diameter : 4mm Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Ca...

3.49 £
Spare HSS drill bit for the SNAP/DBG/5. Dimensions : Diameter : 5/64 inch Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend List Prices...

5.49 £
Replacement No10 set snappy flip driver. Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend List Prices excluding VAT....

5.49 £
Replacement No8 set snappy flip driver. Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend List Prices excluding VAT....

15.95 £
The Snappy system starts with the Quick Chuck. Six flats on the shank ensure precise location in the chuck. A sprung loaded outer sleeve makes it easy to remove attachments. This chuck is suitable for use in 5/16 inch Yankee Ratchet screwdri...

2.95 £
Replacement spring for the SNAP/DBG/12. Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend List Prices excluding VAT....

7.95 £
For use on glass, porcelain, tile and mirrors. To be used in drill presses and portable drills The spear point is a fully ground profile tip for clean entry. Drill at slow speed, applying light pressure and use lubricant, make pool with putt...

10.49 £
The 15mm machine bit is designed to suit cam and dowel fixings. It is recommended that these bits are used in a drill stand. Dimensions : Diameter : 15 mm Cutting Length : 55 mm Shank Diameter : 1/4 hex Please note that prices in t...

5.40 £
One of the most accurate methods of cutting holes or pockets is by using a hole saw.The tubular body ensures that the hole remains true even after the teeth have broken through. So whether you are installing pipes and cables or making toys or furn...

7.49 £
One of the most accurate methods of cutting holes or pockets is by using a hole saw.The tubular body ensures that the hole remains true even after the teeth have broken through. So whether you are installing pipes and cables or making toys or furn...