A superior quality electric plastic livestock fencing twine suitable for long, short, temporary or semi-permanent fences. This fencing twine is flexible and light and has 6 stainless steel conductors running through its length to ensure good conductivity.* Plastic* Stainless-steel conductors* Flexible* Light* Good conductivityHere are the Top Ten rules to make your electric fence work properly!1 Keep your fence as free from growth as possible – Growth impairs the output of every commercial appliance and results in increased power consumption, especially with battery-driven appliances.2 Make sure that the earthing is optimal.3 Do not connect two conductive plastic wires by tying them – Use special conductors.4 Fence wire/tape/rope must not be broken.5 Use conductive material having the best possible conductivity – i.e. Low resistance.6 Keep fence wire and earthing rod free from rust – Rust is an insulator.7 Weather-beaten or nagged insulators are unsuitable – Causes a high loss of output.8 Ensure connection between the energiser and wire is optimal – Use cable resistant to high voltage for underground feeds.9 With battery-driven energisers, check battery condition regularly.10 Ensure that each point of the fence is live using an electric fence tester.

Polywire is ideal for using on top of existing wooden post and rail fences to prevent horses from chewing on posts or leaning over in to the next field. Also to keep horses from barbed wire fences. This fencing wire is flexible and light and has 3 stainless steel strand conductors running through its length to ensure good conductivity. Rated at 15 Ohms/metre. 40Kgs breaking strength. A choice of 250 or 500 metres on a reel. Green/white colour with UV protection.* Plastic* 3 stainless steel strand conductors* 15 Ohms/Metre* 40kgs breaking strength* Flexible* Light* Good conductivity* 250 or 500 metres on a reel* UV protection* Green/whiteHere are the Top Ten rules to make your electric fence work properly!1 Keep your fence as free from growth as possible – Growth impairs the output of every commercial appliance and results in increased power consumption, especially with battery-driven appliances.2 Make sure that the earthing is optimal.3 Do not connect two conductive plastic wires by tying them – Use special conductors.4 Fence wire/tape/rope must not be broken.5 Use conductive material having the best possible conductivity – i.e. Low resistance.6 Keep fence wire and earthing rod free from rust – Rust is an insulator.7 Weather-beaten or nagged insulators are unsuitable – Causes a high loss of output.8 Ensure connection between the energiser and wire is optimal – Use cable resistant to high voltage for underground feeds.9 With battery-driven energisers, check battery condition regularly.10 Ensure that each point of the fence is live using an electric fence tester.

This pack of insulators can carry most sizes of rope and tape up to 40mm. After placing tape through the carrier slot, click clamp over gap to secure. To fit simply nail to fencing post.* Simple tape fitting with secure clip* Nail to post* Up to 40mm wide tape* Will take most sizes of ropeHere are the Top Ten rules to make your electric fence work properly!1 Keep your fence as free from growth as possible – Growth impairs the output of every commercial appliance and results in increased power consumption, especially with battery-driven appliances.2 Make sure that the earthing is optimal.3 Do not connect two conductive plastic wires by tying them – Use special conductors.4 Fence wire/tape/rope must not be broken.5 Use conductive material having the best possible conductivity – i.e. Low resistance.6 Keep fence wire and earthing rod free from rust – Rust is an insulator.7 Weather-beaten or nagged insulators are unsuitable – Causes a high loss of output.8 Ensure connection between the energiser and wire is optimal – Use cable resistant to high voltage for underground feeds.9 With battery-driven energisers, check battery condition regularly.10 Ensure that each point of the fence is live using an electric fence tester.

Why make work for yourself! This simple drill attachment helps with the laborious task of screwing in many insulators. Simply fit into your drill chuck (as any normal drill) and slot over the insulator head and screw in. Makes things easy. Saves blisters and sore hands Simple and efficient! * Simple, easy and efficient* Slot into drill chuckHere are the Top Ten rules to make your electric fence work properly!1 Keep your fence as free from growth as possible – Growth impairs the output of every commercial appliance and results in increased power consumption, especially with battery-driven appliances.2 Make sure that the earthing is optimal.3 Do not connect two conductive plastic wires by tying them – Use special conductors.4 Fence wire/tape/rope must not be broken.5 Use conductive material having the best possible conductivity – i.e. Low resistance.6 Keep fence wire and earthing rod free from rust – Rust is an insulator.7 Weather-beaten or nagged insulators are unsuitable – Causes a high loss of output.8 Ensure connection between the energiser and wire is optimal – Use cable resistant to high voltage for underground feeds.9 With battery-driven energisers, check battery condition regularly.10 Ensure that each point of the fence is live using an electric fence tester.

Why make work for yourself! This simple drill attachment helps with the laborious task of screwing in many insulators. Simply fit into your drill chuck (as any normal drill) and slot over the insulator head and screw in. Makes things easy. Saves blisters and sore hands Simple and efficient! * Simple, easy and efficient* Slot into drill chuckHere are the Top Ten rules to make your electric fence work properly!1 Keep your fence as free from growth as possible – Growth impairs the output of every commercial appliance and results in increased power consumption, especially with battery-driven appliances.2 Make sure that the earthing is optimal.3 Do not connect two conductive plastic wires by tying them – Use special conductors.4 Fence wire/tape/rope must not be broken.5 Use conductive material having the best possible conductivity – i.e. Low resistance.6 Keep fence wire and earthing rod free from rust – Rust is an insulator.7 Weather-beaten or nagged insulators are unsuitable – Causes a high loss of output.8 Ensure connection between the energiser and wire is optimal – Use cable resistant to high voltage for underground feeds.9 With battery-driven energisers, check battery condition regularly.10 Ensure that each point of the fence is live using an electric fence tester.

This electric fencing line tester could not be simpler to use. Push the earth prong into the ground and then touch the tester wire to the fencing tape. The bulb will light up to indicate the fence is `live'. Unit also has a test button. Size 85mm x 20mm.* Simple and easy to use* Earth prong* `Live' indicator bulb* Test buttonHere are the Top Ten rules to make your electric fence work properly!1 Keep your fence as free from growth as possible – Growth impairs the output of every commercial appliance and results in increased power consumption, especially with battery-driven appliances.2 Make sure that the earthing is optimal.3 Do not connect two conductive plastic wires by tying them – Use special conductors.4 Fence wire/tape/rope must not be broken.5 Use conductive material having the best possible conductivity – i.e. Low resistance.6 Keep fence wire and earthing rod free from rust – Rust is an insulator.7 Weather-beaten or nagged insulators are unsuitable – Causes a high loss of output.8 Ensure connection between the energiser and wire is optimal – Use cable resistant to high voltage for underground feeds.9 With battery-driven energisers, check battery condition regularly.10 Ensure that each point of the fence is live using an electric fence tester.

This extended insulator has an offset of 18cm, making it ideal for keeping animals off fences. Bought individually, it is capable of taking rope or twine. Perfect for fastening to wooden posts.* Plastic with metal screw* 18cm offset from post* Bought individually* To carry rope or twine* Black* Screw into wooden posts* Full insulationHere are the Top Ten rules to make your electric fence work properly!1 Keep your fence as free from growth as possible – Growth impairs the output of every commercial appliance and results in increased power consumption, especially with battery-driven appliances.2 Make sure that the earthing is optimal.3 Do not connect two conductive plastic wires by tying them – Use special conductors.4 Fence wire/tape/rope must not be broken.5 Use conductive material having the best possible conductivity – i.e. Low resistance.6 Keep fence wire and earthing rod free from rust – Rust is an insulator.7 Weather-beaten or nagged insulators are unsuitable – Causes a high loss of output.8 Ensure connection between the energiser and wire is optimal – Use cable resistant to high voltage for underground feeds.9 With battery-driven energisers, check battery condition regularly.10 Ensure that each point of the fence is live using an electric fence tester.

The extended insulator is for up to 40mm tape and also takes rope or twine. The rope hole gives a 22cm offset from the post, keeping the animal off the fencing. Perfect for fastening to wooden posts as it has a unique screw thread that helps avoid wood split. * Pack of 10 * Plastic with metal screw* 22cm offset from post* Up to 40mm fencing tape, rope or twine* Black* Screw into wooden posts* Full insulationHere are the Top Ten rules to make your electric fence work properly!1 Keep your fence as free from growth as possible – Growth impairs the output of every commercial appliance and results in increased power consumption, especially with battery-driven appliances.2 Make sure that the earthing is optimal.3 Do not connect two conductive plastic wires by tying them – Use special conductors.4 Fence wire/tape/rope must not be broken.5 Use conductive material having the best possible conductivity – i.e. Low resistance.6 Keep fence wire and earthing rod free from rust – Rust is an insulator.7 Weather-beaten or nagged insulators are unsuitable – Causes a high loss of output.8 Ensure connection between the energiser and wire is optimal – Use cable resistant to high voltage for underground feeds.9 With battery-driven energisers, check battery condition regularly.10 Ensure that each point of the fence is live using an electric fence tester.

The perfect fencing tape to get you started or simply to fence off an area for little cost. Tape is white in colour for visibility and each reel holds 200 metres. This electric fencing tape offers good coverage for a good price!* 200 metres reel length* Four or five stainless-steel conductors* White colourHere are the Top Ten rules to make your electric fence work properly!1 Keep your fence as free from growth as possible – Growth impairs the output of every commercial appliance and results in increased power consumption, especially with battery-driven appliances.2 Make sure that the earthing is optimal.3 Do not connect two conductive plastic wires by tying them – Use special conductors.4 Fence wire/tape/rope must not be broken.5 Use conductive material having the best possible conductivity – i.e. Low resistance.6 Keep fence wire and earthing rod free from rust – Rust is an insulator.7 Weather-beaten or nagged insulators are unsuitable – Causes a high loss of output.8 Ensure connection between the energiser and wire is optimal – Use cable resistant to high voltage for underground feeds.9 With battery-driven energisers, check battery condition regularly.10 Ensure that each point of the fence is live using an electric fence tester.

This is a quality standard fencing tape. It has 10 strand, 0.16mm stainless steel conductors running through its 40mm width. There is 200 metres of tape on the reel, which will cross 28 fence posts, in single strand, at seven metres apart in good fencing areas. A feature of this fence tape is that it has UV protection to stop the tape degenerating in strong sunlight. Good width tape offering good coverage for a good price!* 40mm width tape* 200 metres reel length* 10 strand, 0.16mm stainless-steel conductors* UV protection* White colourHere are the Top Ten rules to make your electric fence work properly!1 Keep your fence as free from growth as possible – Growth impairs the output of every commercial appliance and results in increased power consumption, especially with battery-driven appliances.2 Make sure that the earthing is optimal.3 Do not connect two conductive plastic wires by tying them – Use special conductors.4 Fence wire/tape/rope must not be broken.5 Use conductive material having the best possible conductivity – i.e. Low resistance.6 Keep fence wire and earthing rod free from rust – Rust is an insulator.7 Weather-beaten or nagged insulators are unsuitable – Causes a high loss of output.8 Ensure connection between the energiser and wire is optimal – Use cable resistant to high voltage for underground feeds.9 With battery-driven energisers, check battery condition regularly.10 Ensure that each point of the fence is live using an electric fence tester.

Takes up to 40mm tape.

For all tape upto 20mm

This is a replacement or spare fencer energiser battery. 75 amp / 9 volts / 90 Ah. Sealed and compact. Small disposal weight. High efficiency also at 6° C. Not rechargeable. Alkaline version of 90Ah saline battery. Energy output 570 Wh. Suitable for fencers up to 0.8J.* Not rechargeable* Dry battery* Sealed and compact* Ag-fence* 9 volt / 90Ah / 75 amp* Energy output 570 Wh* Alkaline version of 90Ah saline battery* High efficiency also at 6° C* Suitable for small fencers – up to 0.8J. If you require power for your fencing our range of energisers provide ample coverage and simplicity of operation.For battery energisers see:CP250 constant power energiser, code: 41307CP500 constant power energiser, code: 41307DP350B battery energiser, code: 41330.Here are the Top Ten rules to make your electric fence work properly!1 Keep your fence as free from growth as possible – Growth impairs the output of every commercial appliance and results in increased power consumption, especially with battery-driven appliances.2 Make sure that the earthing is optimal.3 Do not connect two conductive plastic wires by tying them – Use special conductors.4 Fence wire/tape/rope must not be broken.5 Use conductive material having the best possible conductivity – i.e. Low resistance.6 Keep fence wire and earthing rod free from rust – Rust is an insulator.7 Weather-beaten or nagged insulators are unsuitable – Causes a high loss of output.8 Ensure connection between the energiser and wire is optimal – Use cable resistant to high voltage for underground feeds.9 With battery-driven energisers, check battery condition regularly.10 Ensure that each point of the fence is live using an electric fence tester.

Insert two inside your energiser to replace back-up batteries. Cadmium and mercury free. Torch, non-rechargeable battery PJ996 Pet. Suitable for use in CP80, CP250 and CP500 energisers.* Non-rechargeable* Cadmium and mercury free* Torch* PJ996 Pet* Suitable for use in CP80, CP250 and CP500 energisers If you require power for your fencing our range of energisers provide ample coverage and simplicity of operation.For battery energisers see:CP250 constant power energiser, code: 41307CP500 constant power energiser, code: 41307DP350B battery energiser, code: 41330.Here are the Top Ten rules to make your electric fence work properly!1 Keep your fence as free from growth as possible – Growth impairs the output of every commercial appliance and results in increased power consumption, especially with battery-driven appliances.2 Make sure that the earthing is optimal.3 Do not connect two conductive plastic wires by tying them – Use special conductors.4 Fence wire/tape/rope must not be broken.5 Use conductive material having the best possible conductivity – i.e. Low resistance.6 Keep fence wire and earthing rod free from rust – Rust is an insulator.7 Weather-beaten or nagged insulators are unsuitable – Causes a high loss of output.8 Ensure connection between the energiser and wire is optimal – Use cable resistant to high voltage for underground feeds.9 With battery-driven energisers, check battery condition regularly.10 Ensure that each point of the fence is live using an electric fence tester.

This is a replacement or spare energiser battery. Cadmium and mercury free. Non-rechargeable battery double PP8. Suitable for small fencers – up to 0.3J.* Non-rechargeable* Dry battery* Cadmium and mercury free* Turbomax AB40* Double PP8* Type 6 volt / 40Ah* Alkaline* Suitable for small fencers – up to 0.3J. If you require power for your fencing our range of energisers provide ample coverage and simplicity of operation.For battery energisers see:CP250 constant power energiser, code: 41307CP500 constant power energiser, code: 41307DP350B battery energiser, code: 41330.Here are the Top Ten rules to make your electric fence work properly!1 Keep your fence as free from growth as possible – Growth impairs the output of every commercial appliance and results in increased power consumption, especially with battery-driven appliances.2 Make sure that the earthing is optimal.3 Do not connect two conductive plastic wires by tying them – Use special conductors.4 Fence wire/tape/rope must not be broken.5 Use conductive material having the best possible conductivity – i.e. Low resistance.6 Keep fence wire and earthing rod free from rust – Rust is an insulator.7 Weather-beaten or nagged insulators are unsuitable – Causes a high loss of output.8 Ensure connection between the energiser and wire is optimal – Use cable resistant to high voltage for underground feeds.9 With battery-driven energisers, check battery condition regularly.10 Ensure that each point of the fence is live using an electric fence tester.

What is ConfidenceEQThe equine appeasing pheromone is released by the mare shortly after giving birth, this pheromone provides the foal with reassurance helping it feel safe and secure when encountering new situations/unknown environments. In adult horses, the presence of this pheromone is a signal that the environment is safe.ConfidenceEQ® is a synthetic copy of the equine appeasing pheromone. Since equine appeasing pheromone was identified, numerous studies have been conducted confirming its efficacy in controlling stress in commonly encountered situations in horses of all ages including, loading, travelling, environmental changes, training, events, social situations (weaning, farrier visits vet visits)ConfidenceEQ® is available as a pack of 10 gel sachets which is applied just inside the nostril of the horse. The action of ConfidenceEQ® lasts approximately 2 1/2hrs after application. Single sachets are also available to purchase on code 62945.ConfidenceEQ:o Clinical trials proving efficacyo Works in 30 minuteso Easy to give gel (no feed, syringe or pills!)o Veterinary endorsed with OTC licence

What is ConfidenceEQThe equine appeasing pheromone is released by the mare shortly after giving birth, this pheromone provides the foal with reassurance helping it feel safe and secure when encountering new situations/unknown environments. In adult horses, the presence of this pheromone is a signal that the environment is safe.ConfidenceEQ® is a synthetic copy of the equine appeasing pheromone. Since equine appeasing pheromone was identified, numerous studies have been conducted confirming its efficacy in controlling stress in commonly encountered situations in horses of all ages including, loading, travelling, environmental changes, training, events, social situations (weaning, farrier visits vet visits)ConfidenceEQ® is available as a single gel sachet which is applied just inside the nostril of the horse. The action of ConfidenceEQ® lasts approximately 2 1/2hrs after application. Pack of 10 gel sachets is also available to purchase on code 62944.ConfidenceEQ:o Clinical trials proving efficacyo Works in 30 minuteso Easy to give gel (no feed, syringe or pills!)o Veterinary endorsed with OTC licence

600 denier outer, 200gm filling and polycotton linin. Detachable neck.

210d ripstop material 200gm filling, with detachable neck.

The Saxon Combo Heavy is a combo neck heavyweight turnout rug that is great value for money and sure to keep your horse cosy and dry in bad weather. Features of the Saxon Combo Heavy include a waterproof and breathable 600 denier outer, a heavy 300 gram filling and a nylon ling to keep the horses coat shiny and clean. Further features include twin surcingle chest straps for easy use, adjustable cross surcingle’s, a tail flap for added protection and a combo neck with touch tape closures. * Waterproof & Breathable* 600 Denier Outer* 300 Gram Fill* Nylon Lining* Cross Surcingle’s* Tail FlapColour available Rhododendron/GreyPlease Note The rug is darker than shown in the supplier image. It is more of a Dark Red.