A replacement breeching strap for use in the back of trailers.

A fun starter trap with tubular metal chassis, pneumatic tyres, tubular steel shafts and a perforated steel floor. The trap is wider than our previous models with more robust wheels and floor, plus a metal swindle tree. Wheel diameter: 52cm, Width at the back of the seat: 95cm, Length of shafts: 123cm, Total length of the trap: 220cm, Height under tugs: 73cm, Shaft between tugs: 46cm, Seat is adjustable to give balance.We recommend you train with a qualified instructor if you have not driven before.Please Note: Each trap is delivered in 3 or 4 packages for self assembly. Assembly tools are included. Robinsons reserves the right to modify trap design and sizes in pursuit of our policy of continuous improvement. These traps are designed for use on paved roads only not uneven surfaces or grass maximum load 120kg and speed 20kph.

This solar powered energiser unit could do away with the need for a leisure or replacement back-up lantern batteries. It has a rechargeable 12 volt 7 A-HR sealed lead acid battery housed in the space previously used by the back-up batteries inside the CP250 main unit. This is charged by a 6 watt solar panel. The solar panel fastens to the top of the energiser unit and can be adjusted to the correct angle to maximise the rays of the sun. An integral earthing stake and connecting wire to the fence are provided. The CP250 Constant Power Energiser features a patent circuit, as the battery runs down, the output from the energiser will remain the same. Power output is 12V 0.25J. This means the electric fence will be working at 100% all of the time, right up to the point when the battery needs replacing. The CP250 unit can provide instant power output for up to 4000 metres of single strand fencing and up to 2000 metres of dual strand fencing. * CP250 energiser* Patent circuit* Output level remains constant* Instant power* 4000 metres single strand* 2000 metres double strand* Battery low indicator* Fence line indicator* Output indicator* Integral earth stake* Carrying handle* Fence connecting wire If you want power for your fencing our range of energisers provide ample coverage and simplicity of operation.Here are the Top Ten rules to make your electric fence work properly!1 Keep your fence as free from growth as possible – Growth impairs the output of every commercial appliance and results in increased power consumption, especially with battery-driven appliances.2 Make sure that the earthing is optimal.3 Do not connect two conductive plastic wires by tying them – Use special conductors.4 Fence wire/tape/rope must not be broken.5 Use conductive material having the best possible conductivity – i.e. Low resistance.6 Keep fence wire and earthing rod free from rust – Rust is an insulator.7 Weather-beaten or nagged insulators are unsuitable – Causes a high loss of output.8 Ensure connection between the energiser and wire is optimal – Use cable resistant to high voltage for underground feeds.9 With battery-driven energisers, check battery condition regularly.10 Ensure that each point of the fence is live using an electric fence tester.

This is a quality, simple mains energiser. It can power up to 8000 metres of single strand fencing or 4000 metres of dual strand. Due to the energiser being mains wired it should be housed in a dry building. Maximum output energy 1.3J. Maximum voltage 6500v, mains 230v. Suitable for horses and pets. If this is your first mains unit, a mains wiring kit would be required for this, see code 41002. * M100 mains energiser* 8000 metres single strand* 4000 metres double strand If you want power for your fencing our range of energisers provide ample coverage and simplicity of operation. For other battery alternatives see code: 41330 or 41307Here are the Top Ten rules to make your electric fence work properly!1 Keep your fence as free from growth as possible – Growth impairs the output of every commercial appliance and results in increased power consumption, especially with battery-driven appliances.2 Make sure that the earthing is optimal.3 Do not connect two conductive plastic wires by tying them – Use special conductors.4 Fence wire/tape/rope must not be broken.5 Use conductive material having the best possible conductivity – i.e. Low resistance.6 Keep fence wire and earthing rod free from rust – Rust is an insulator.7 Weather-beaten or nagged insulators are unsuitable – Causes a high loss of output.8 Ensure connection between the energiser and wire is optimal – Use cable resistant to high voltage for underground feeds.9 With battery-driven energisers, check battery condition regularly.10 Ensure that each point of the fence is live using an electric fence tester.

This is a pack of 2 replacement size D cell batteries. Not rechargeable. Dry battery. Alkaline. 13A, LR20, size D, 1.5V. For use with Fenceman DP350B Battery Energiser, code: 41330.* Not rechargeable* Dry battery* 1.5 volt / 13A / LR20* Size D cell* Alkaline, dry battery* For use with Fenceman DP350B Battery Energiser (code: 41330). If you require power for your fencing our range of energisers provide ample coverage and simplicity of operation.For battery energisers see:CP250 constant power energiser, code: 41307CP500 constant power energiser, code: 41307DP350B battery energiser, code: 41330.Here are the Top Ten rules to make your electric fence work properly!1 Keep your fence as free from growth as possible – Growth impairs the output of every commercial appliance and results in increased power consumption, especially with battery-driven appliances.2 Make sure that the earthing is optimal.3 Do not connect two conductive plastic wires by tying them – Use special conductors.4 Fence wire/tape/rope must not be broken.5 Use conductive material having the best possible conductivity – i.e. Low resistance.6 Keep fence wire and earthing rod free from rust – Rust is an insulator.7 Weather-beaten or nagged insulators are unsuitable – Causes a high loss of output.8 Ensure connection between the energiser and wire is optimal – Use cable resistant to high voltage for underground feeds.9 With battery-driven energisers, check battery condition regularly.10 Ensure that each point of the fence is live using an electric fence tester.

Neoprene cross country boots with striking pads. Touch tape closures. One Pair.

Neoprene sports boots giving extra support to tendons. Touch tape fastenings. One Pair.

Basic neoprene brushing boots with moulded protection and elasticated hook and loop fastening.Available in colours:BlackWhite

Original Jo boots are stylish brushing boots ideal for shooling and hacking.They featuring a special perforated dense neoprene to allowing airflow to the horses legs. Tough moulded strike pads with extra padding behind, twin touch and close fastenings and recessed stitching. When fitting the boots ensure the horse's leg are clean, place the boot between the knee or hock and fetlock joint, the outer strap should be fastened from front to back this will put the strike pad in the best possible position. These boots are tough, durable and can be used on rear or front legs.

These boots offer total impact protection to fetlock, shins, tendons and ligaments. Double layer, impact-absorbing neoprene is soft and flexible for a comfortable fit and features micro-perforations to allow airflow, keeping the leg from over heating. Touch close straps for security, shaping at the fetlock and brush clean outers. Front or hind use.

Well priced neoprene brushing boots featuring padded contoured strike pads and touch tape closures.Please note it is only the Full size boots (pictured) that have the 3 fasteninig straps, the other size boots have 2 straps.

Neoprene tendon boots with rounded soft edges and tough moulded outers with elasticated straps.

Specially designed for speed classes. Ultra lightweight. Air cooled tendon protection. Carbon fibre strike protection, quick wrap fastener and even pressure.

Ultra lightweight air cooled tendon protection. Carbon fibre strike protection quick wrap fastener. Even pressure high durability.

Set of boots containing neoprene lined tendon and fetlock boots.

Three touch close fastening strap, and a padded striking pad on the inside of the leg for protection.

Features a fleece lining that helps prevent dirt, mud and sand moving up inside the boot and causing irritation.Touch tape fastenings.Padded strike pad to inside of the leg.

A shatter proof carbon fibre strip has been inserted into the back of the boots for added protection to the tendon, the boots are perfectly anatomically shaped, the neoprene padding has also been shaped with tendon support to protect and support the tendons.

Made from quick clean material, these boots are ideal for terrain and water riding, touch tape closures for easy fastening.

Tekna quick clean synthetic boots, moulded in good shape providing ultimate protection and support to the horses legs. Breathable and comfortable neoprene lining, hook stud closures.