Ashima Disc Brake Adapter, PM-ISWhen you are converting Post Mount (PM) to International Standard (IS) discs, Ashima have the full range of adapters. These strong adapters should do the job, whatever you need. The Ashima range of adaptors are designed to allow fitment to most major brand OEM and aftermarket systems ,they are also suitable for both hydraulic and mechanical brakes.When selecting the correct adapter to accommodate an increase in disc size extra care should be taken to ensure the correct size is used. Ashima stated disk compatibility assume OEM front 160mm and rear 140mm disks. However in recent years, some OEMs fit oversized disks to font and/or rear, in such cases the brake calliper will have an adapter fitted. If this is the case, the OEM adapter will either need to be removed (Ashima recommends this) or you should select an adapter for the next standard disc size below your requirement.Example: If you have a PM brake calliper, PM forks and wish to up-grade the front disk form 160 to 203 and the rear form 140 to 180 you will require the following adapters:Front AU32 and Rear AU04.

Ashima Disc Brake Adapter, PM-ISWhen you are converting Post Mount (PM) to International Standard (IS) discs, Ashima have the full range of adapters. These strong adapters should do the job, whatever you need. The Ashima range of adaptors are designed to allow fitment to most major brand OEM and aftermarket systems ,they are also suitable for both hydraulic and mechanical brakes.When selecting the correct adapter to accommodate an increase in disc size extra care should be taken to ensure the correct size is used. Ashima stated disk compatibility assume OEM front 160mm and rear 140mm disks. However in recent years, some OEMs fit oversized disks to font and/or rear, in such cases the brake calliper will have an adapter fitted. If this is the case, the OEM adapter will either need to be removed (Ashima recommends this) or you should select an adapter for the next standard disc size below your requirement.Example: If you have a PM brake calliper, PM forks and wish to up-grade the front disk form 160 to 203 and the rear form 140 to 180 you will require the following adapters:Front AU32 and Rear AU04.

Ashima Disc Brake Adapter, PM-ISWhen you are converting Post Mount (PM) to International Standard (IS) discs, Ashima have the full range of adapters. These strong adapters should do the job, whatever you need. The Ashima range of adaptors are designed to allow fitment to most major brand OEM and aftermarket systems ,they are also suitable for both hydraulic and mechanical brakes.When selecting the correct adapter to accommodate an increase in disc size extra care should be taken to ensure the correct size is used. Ashima stated disk compatibility assume OEM front 160mm and rear 140mm disks. However in recent years, some OEMs fit oversized disks to font and/or rear, in such cases the brake calliper will have an adapter fitted. If this is the case, the OEM adapter will either need to be removed (Ashima recommends this) or you should select an adapter for the next standard disc size below your requirement.Example: If you have a PM brake calliper, PM forks and wish to up-grade the front disk form 160 to 203 and the rear form 140 to 180 you will require the following adapters:Front AU32 and Rear AU04.

Ashima Disc Brake Adapter, PM-ISWhen you are converting Post Mount (PM) to International Standard (IS) discs, Ashima have the full range of adapters. These strong adapters should do the job, whatever you need. The Ashima range of adaptors are designed to allow fitment to most major brand OEM and aftermarket systems ,they are also suitable for both hydraulic and mechanical brakes.When selecting the correct adapter to accommodate an increase in disc size extra care should be taken to ensure the correct size is used. Ashima stated disk compatibility assume OEM front 160mm and rear 140mm disks. However in recent years, some OEMs fit oversized disks to font and/or rear, in such cases the brake calliper will have an adapter fitted. If this is the case, the OEM adapter will either need to be removed (Ashima recommends this) or you should select an adapter for the next standard disc size below your requirement.Example: If you have a PM brake calliper, PM forks and wish to up-grade the front disk form 160 to 203 and the rear form 140 to 180 you will require the following adapters:Front AU32 and Rear AU04.

Ashima Disc Brake Adapter, PM-ISWhen you are converting Post Mount (PM) to International Standard (IS) discs, Ashima have the full range of adapters. These strong adapters should do the job, whatever you need. The Ashima range of adaptors are designed to allow fitment to most major brand OEM and aftermarket systems ,they are also suitable for both hydraulic and mechanical brakes.When selecting the correct adapter to accommodate an increase in disc size extra care should be taken to ensure the correct size is used. Ashima stated disk compatibility assume OEM front 160mm and rear 140mm disks. However in recent years, some OEMs fit oversized disks to font and/or rear, in such cases the brake calliper will have an adapter fitted. If this is the case, the OEM adapter will either need to be removed (Ashima recommends this) or you should select an adapter for the next standard disc size below your requirement.Example: If you have a PM brake calliper, PM forks and wish to up-grade the front disk form 160 to 203 and the rear form 140 to 180 you will require the following adapters:Front AU32 and Rear AU04.

Ashima Disc Brake Adapter, IS-ISWhen you are resizing International Standard (IS) discs, Ashima have the full range of adapters. These strong adapters should do the job, whatever you need. The Ashima range of adaptors are designed to allow fitment to most major brand OEM and aftermarket systems ,they are also suitable for both hydraulic and mechanical brakes.When selecting the correct adapter to accommodate an increase in disc size extra care should be taken to ensure the correct size is used. Ashima stated disk compatibility assume OEM front 160mm and rear 140mm disks. However in recent years, some OEMs fit oversized disks to font and/or rear, in such cases the brake calliper will have an adapter fitted. If this is the case, the OEM adapter will either need to be removed (Ashima recommends this) or you should select an adapter for the next standard disc size below your requirement.Example: If you have a PM brake calliper, PM forks and wish to up-grade the front disk form 160 to 203 and the rear form 140 to 180 you will require the following adapters:Front AU32 and Rear AU04.

Ashima Front Disc Brake Adapter, IS-PMWhen you are converting International Standard (IS) to Post Mount (PM) discs, Ashima have the full range of adapters. These strong adapters should do the job, whatever you need. The Ashima range of adaptors are designed to allow fitment to most major brand OEM and aftermarket systems ,they are also suitable for both hydraulic and mechanical brakes.When selecting the correct adapter to accommodate an increase in disc size extra care should be taken to ensure the correct size is used. Ashima stated disk compatibility assume OEM front 160mm and rear 140mm disks. However in recent years, some OEMs fit oversized disks to font and/or rear, in such cases the brake calliper will have an adapter fitted. If this is the case, the OEM adapter will either need to be removed (Ashima recommends this) or you should select an adapter for the next standard disc size below your requirement.Example: If you have a PM brake calliper, PM forks and wish to up-grade the front disk form 160 to 203 and the rear form 140 to 180 you will require the following adapters:Front AU32 and Rear AU04.

Ashima Front Disc Brake Adapter, IS-PMWhen you are converting International Standard (IS) to Post Mount (PM) discs, Ashima have the full range of adapters. These strong adapters should do the job, whatever you need. The Ashima range of adaptors are designed to allow fitment to most major brand OEM and aftermarket systems ,they are also suitable for both hydraulic and mechanical brakes.When selecting the correct adapter to accommodate an increase in disc size extra care should be taken to ensure the correct size is used. Ashima stated disk compatibility assume OEM front 160mm and rear 140mm disks. However in recent years, some OEMs fit oversized disks to font and/or rear, in such cases the brake calliper will have an adapter fitted. If this is the case, the OEM adapter will either need to be removed (Ashima recommends this) or you should select an adapter for the next standard disc size below your requirement.Example: If you have a PM brake calliper, PM forks and wish to up-grade the front disk form 160 to 203 and the rear form 140 to 180 you will require the following adapters:Front AU32 and Rear AU04.

Ashima Front Disc Brake Adapter, PM-PMWhen you are resizing Post Mount (PM) discs, Ashima have the full range of adapters. These strong adapters should do the job, whatever you need. The Ashima range of adaptors are designed to allow fitment to most major brand OEM and aftermarket systems ,they are also suitable for both hydraulic and mechanical brakes.When selecting the correct adapter to accommodate an increase in disc size extra care should be taken to ensure the correct size is used. Ashima stated disk compatibility assume OEM front 160mm and rear 140mm disks. However in recent years, some OEMs fit oversized disks to font and/or rear, in such cases the brake calliper will have an adapter fitted. If this is the case, the OEM adapter will either need to be removed (Ashima recommends this) or you should select an adapter for the next standard disc size below your requirement.Example: If you have a PM brake calliper, PM forks and wish to up-grade the front disk form 160 to 203 and the rear form 140 to 180 you will require the following adapters:Front AU32 and Rear AU04.

Ashima Airotor, 6 Bolt Brake DiscSuper light and ultra durable, this 410 stainless steel rotor weighs in at only 85 grams for the 160mm. The all-day, all-mountain rider’s ideal choice.Compatible with Avid brake systems, you can now upgrade your existing rotors to the superbly light and durable AirRotor.

Ashima Airotor, 6 Bolt Brake DiscSuper light and ultra durable, this 410 stainless steel rotor weighs in at only 85 grams for the 160mm. The all-day, all-mountain rider’s ideal choice.Compatible with Avid brake systems, you can now upgrade your existing rotors to the superbly light and durable AirRotor.

Ashima Airotor, 6 Bolt Brake DiscSuper light and ultra durable, this 410 stainless steel rotor weighs in at only 85 grams for the 160mm. The all-day, all-mountain rider’s ideal choice.Compatible with Avid brake systems, you can now upgrade your existing rotors to the superbly light and durable AirRotor.

Ashima Airotor, 6 Bolt Brake DiscSuper light and ultra durable, this 410 stainless steel rotor weighs in at only 85 grams for the 160mm. The all-day, all-mountain rider’s ideal choice.Compatible with Avid brake systems, you can now upgrade your existing rotors to the superbly light and durable AirRotor.

Ashima Super Noodle, Cable GuideAmazingly simple and effective noodle solution.

Avid G2 Clean Sweep, 6 Bolt RotorThe G2 CleanSweep design helps keep dirt and grime from mucking up your ride. For use with Elixir 1 and Ball Bearing disc Brakes.

Avid G2 Clean Sweep, 6 Bolt RotorThe G2 CleanSweep design helps keep dirt and grime from mucking up your ride. For use with Elixir 1 and Ball Bearing disc Brakes.

Avid MY07-10 Code Disc Brake Pads Sintered.

Avid X MatchmakersCleans up bar space by integrating an Avid disc brake with SRAM trigger shifters, RockShox XLoc, and Reverb remote assemblies

Avid G2 Clean Sweep, 6 Bolt RotorThe G2 CleanSweep design helps keep dirt and grime from mucking up your ride. For use with Elixir 1 and Ball Bearing disc Brakes.

Avid G2 Clean Sweep, 6 Bolt RotorThe G2 CleanSweep design helps keep dirt and grime from mucking up your ride. For use with Elixir 1 and Ball Bearing disc Brakes.