This pair of boots are designed to provide extra protection from brushing, whether you're schooling or competing. You can even use them for protecting your horse’s legs during turnout.They’re made from a thick, breathable and flexible neoprene base which offers comfort and support while the durable PVC striking pads on the inside provide protection, they have three adjustable touch tape fastenings for ease and safety when fitting and which will keep the boots securely in place when in use. The materials used are easy to manitain.These boots may also be used on fore or hind legs. Please bear in mind that the size your horse requires for a foreleg may differ from the required size for a hind leg. These have PVC Striking pads and not suede.Requisite Neoprene Brushing Boots in brief:* Thick, breathable and flexible neoprene* Durable PVC striking pads* Three adjustable touch tape fastenings for ease and safety when fitting* Easy to use materials* Can be used on fore or hind legs

This pair of boots are great for protecting your horse’s legs. They’ve been designed with most activities in mind, especially good for schooling and hacking. You can even use them for protecting your horse’s legs during turnout.They’re made from fully breathable Stomatex, which helps keep the temperature inside the boots at a comfortable level. They are soft and comfortable while offering your horse full freedom of movement. The strong cushioned panel has no hardness or rigidity. With two adjustable touch tape fastening straps for ease and safety when fitting. The materials used on these boots make them easy to maintain.These boots may be used on fore or hind legs. Please bear in mind that the size your horse requires for a foreleg may differ from the required size for a hind leg.Equilibrium Stretch n Flex® Flatwork Boots in brief:* Great for schooling and hacking* Fully breathable Stomatex, which helps the temperature inside the boots* Soft and comfortable whilst providing freedom of movement* Strong cushioned panel that has no hardness or rigidity* Two adjustable touch tape fastenings straps for ease and safety when fitting* Easy to maintain materials* Can be used on fore or hind legs

A high potency hoof strengthener. A formulation to promote healthy keratin. Main ingredients include:Pure Biotin 2%, Wheatflour, Sharps.15mg of pure Biotin is included in each serving.

A natural product which Contains Glucosamine Sulphate, MSM, Vitamin C in a glucose base, which has no side effects and provides building blocks for healthy tendons, cartilage and joints in horses of all ages. Feed 30 gms daily for the first 3 weeks, then cut down to maintenance rate of 15 gms

A very popular liquid feed supplement based on molasses. Added calcium and phosphorus ensures a healthy skeletal system.

A straight condiment for horses and ponies. Maintains a healthy digestive tract and can be used as a feed appetiser for shy feeders and poor doers. Helps to disguise the taste of medication and wormers.Feed 15g twice a day for horses and 15g once a day for ponies.Available in a 1kg bag.

Suitable for long fences. Has reinforced edges. 40 mm Tape has 4. x 0.3 mm SS conductors + 9 x 0.2 mm SS Conductors + 2 x 0.25 Copper conductors. Resistance 0.15 Ohm / m. UV protectected. BS230kg.40mm x 200m.

Suitable for long fences. Has reinforced edges. 40 mm Tape has 4. x 0.3 mm SS conductors + 9 x 0.2 mm SS Conductors + 2 x 0.25 Copper conductors. Resistance 0.15 Ohm / m. UV protectected. BS230kg.20mm x 200m

The copper conductors reduce the resistance in the tape and so can increase the life of your battery between charges or allow you to run a longer fence.12.5mm x 200m.Reinforced edges.12.5 mm Tape has 5. x 0.2 mm SS conductors + 2 x 0.25 Copper conductors. Resistance 0.27 Ohm / m. UV protected. Breaking Strain 95kg.

A universal insulator for all ropes and twines. Pack of 25.

This is a fencing tape gate insulator. A unique threaded screw design helps minimise any wood splitting. It has two solid anchors, one to fasten the tape or rope around to maintain the circuit and the other hooked end which is suitable for gate handles with hook or loop. * Simple and easy* Screw to post* Unique screw thread* For tapes and ropes* Sold individuallyHere are the Top Ten rules to make your electric fence work properly!1 Keep your fence as free from growth as possible – Growth impairs the output of every commercial appliance and results in increased power consumption, especially with battery-driven appliances.2 Make sure that the earthing is optimal.3 Do not connect two conductive plastic wires by tying them – Use special conductors.4 Fence wire/tape/rope must not be broken.5 Use conductive material having the best possible conductivity – i.e. Low resistance.6 Keep fence wire and earthing rod free from rust – Rust is an insulator.7 Weather-beaten or nagged insulators are unsuitable – Causes a high loss of output.8 Ensure connection between the energiser and wire is optimal – Use cable resistant to high voltage for underground feeds.9 With battery-driven energisers, check battery condition regularly.10 Ensure that each point of the fence is live using an electric fence tester

Features tensioning spring

Integral screw-in insulator for tapes up to 40 mm and rope/twine to 6mmPack of 30

This gate connector is made of UV stabilised plastic with strong insulation qualities. Features rotating and long-lasting compression spring. Suitable for high-powered fencers. Hook on one end for gate closing. Clamp attachment on other end that can grip all sizes of rope or twine. * Strong insulation qualities* Rotating, long lasting compression spring* Good for high powered fencers* Hook on one end* Clamp to grip all sizes of rope or twineHere are the Top Ten rules to make your electric fence work properly!1 Keep your fence as free from growth as possible – Growth impairs the output of every commercial appliance and results in increased power consumption, especially with battery-driven appliances.2 Make sure that the earthing is optimal.3 Do not connect two conductive plastic wires by tying them – Use special conductors.4 Fence wire/tape/rope must not be broken.5 Use conductive material having the best possible conductivity – i.e. Low resistance.6 Keep fence wire and earthing rod free from rust – Rust is an insulator.7 Weather-beaten or nagged insulators are unsuitable – Causes a high loss of output.8 Ensure connection between the energiser and wire is optimal – Use cable resistant to high voltage for underground feeds.9 With battery-driven energisers, check battery condition regularly.10 Ensure that each point of the fence is live using an electric fence tester.

Heavy Duty drop forged , with hardened and tempered head. Cushion grip.10.75 / 27cm

The bottom LH, square top half stable door is manufactured using a ledged & braced structure, with a 22mm planed tongue and groove redwood boarding and lined with 11mm OSB, giving a total thickness of 70 mm.The door is then dipped into a tank with a solvent based golden brown treatment for maximum protection.If an Anti Chew Strip is required see our item code 42238

This treated LH top door has a 12 mm planed redwood tongue and groove face boarding with no inner lining.The frame is 45 mm deep with top and bottom being 12 cm wide. The cross brace is 60 mm wide and edge strips 30 mm wide.

The bottom LH, square top half stable door is manufactured using a ledged & braced structure, with 22mm planed tongue and groove redwood boarding and lined with 11mm OSB, giving a total thickness of 70 mm.The door outer tongue and groove is then brush coated with a solvent based golden brown treatment.This gives a lighter appearance than being dipped. The inner OSB lining is not coated.If an Anti Chew Strip is required see our item code 42238

This untreated LH top door has a 12 mm planed redwood tongue and groove face boarding with no inner lining.The frame is 45 mm deep with top and bottom being 12 cm wide. The cross brace is 60 mm wide and edge strips 30 mm wide.

The bottom LH, square top half stable door is manufactured using a ledged & braced structure, with a 22mm planed tongue and groove redwood boarding and lined with 11mm OSB, giving a total thickness of 70 mm.This bottom door is left untreated to allow you to paint or stain your own colour.If an Anti Chew Strip is required see our item code 42238