
5.95 £
Triangular with edges tapering toward the point. Surfaces and edges single cut. For sharpening all types of saws with fine cross toothing. Available only in second cut. Size 125mm (5in). Side : 9/32in. Type : slim taper saw fil...

6.95 £
A small rectangular slender file with edges tapered to a point. Both faces double cut for locksmithing and other precision work. Size 100mm (4in) Cut : warding smooth Tanged ...

11.95 £
Double cut teeth for filing slots, keyways, grooves, rectangular holes, internal corners and for fine-adjustment of cutting tools. Slightly tapered towards tip for surface filing. Size 200mm (8in) Cut : square second. Wit...

7.95 £
Length 150mm (6in). Side : 1/4in. Type : double ended saw file. ...

7.95 £
Flat files do the same jobs as hand filesbut are sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and stee...

5.95 £
For filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work in high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both si...

8.95 £
For filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work in high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both si...

5.95 £
For the same jobs as the hand file 100, but is sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel....

13.95 £
For filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work in high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both si...

14.95 £
Tapered half round cross section allows use on convex and concave surfaces. Suitable for deburring work. The edges and surfaces are tapered towards the point. 4in and 6in files are fully pointed, 8in and longer semi-pointed. Double cut...

54.95 £
A set of five 8in engineers handled files presented in a plastic roll-up wallet. Contains one of each : hand bastard, hand second, square bastard, half round bastard, round bastard. All files are complete with handles. ...

5.95 £
Flat files do the same jobs as hand filesbut are sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and stee...

9.95 £
Surfaces parallel, edges taper to a point. Surfaces double cut, edges single cut. For fine filing and polishing jobs. 16cm, smooth cut, flat needle file. ...

11.95 £
The Bahco 1-100 Hand files with handles are for filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file may also be used for work in high-alloy tool steels. Also useful for the sharpening of heavy implements. ...

14.95 £
A metal file with an ergo handle for comfort and grip, suitable for homeowners. One side has a single second cut for fine sharpening of edges on above implements and on knives and scissors, etc. and the other side a bastard double cut for ro...

32.95 £
High carbon steel, hardened and tempered with soft grip handles incorporating hang hole. Supplied in tool roll. Contents : flat, hand, half round, round, square, three square files, half round rasp and round rasp....

31.95 £
With one safe edge. Carbon chrome steel hardened and tempered with rust preventative finish and dipped in rust preventative oil. Manufactured in accordance with BS498 : 1990...

41.95 £
With one safe edge. Carbon chrome steel hardened and tempered with rust preventative finish and dipped in rust preventative oil. Manufactured in accordance with BS498 : 1990...

52.95 £
Carbon chrome steel hardened and tempered with rust preventative finish and dipped in rust preventative oil. Manufactured in accordance with BS498 : 1990...

4.95 £
For sharpening non hardpoint saw teeth. Supplied with handle (unassembled). Carbon chrome steel hardened and tempered with rust preventative finish and dipped in rust preventative oil. Manufactured in accordance with BS498 : 1990...