Carbon chrome steel hardened and tempered with rust preventative finish and dipped in rust preventative oil. Manufactured in accordance with BS498 : 1990...

High carbon steel, hardened and tempered for strength and durability. Two component handle featuring a soft grip outer with solid core and shock absorbing inner plug - for safety, performance and control...

Made from hardwood with a metal ferrule to prevent the handle splitting. File handles should always be used with tanged files for the prevention of personal injury, supplied with a pre-drilled pilot hole that should be drilled to the correct size ...

For filing circular openings or concave surfaces. Tapered towards the point, 4in and 6in files are fully pointed, 8in and longer are semi-pointed. All double cut. Size 150mm (6in) Cut : round smooth. Tanged. ...

For filing circular openings or concave surfaces. Tapered towards the point, 4in and 6in files are fully pointed, 8in and longer are semi-pointed. All double cut. Size 250mm (10in) Cut : round smooth. Tanged. ...

For filing circular openings or concave surfaces. Tapered towards the point, 4in and 6in files are fully pointed, 8in and longer are semi-pointed. All double cut. Size 200mm (8in) Cut : round smooth. Tanged. ...

For filing circular openings or concave surfaces. Tapered towards the point, 4in and 6in files are fully pointed, 8in and longer are semi-pointed. All double cut. Size 150mm (6in) Cut : round second. Tanged. ...

Double cut teeth for filing slots, keyways, grooves, rectangular holes, internal corners and for fine-adjustment of cutting tools. Slightly tapered towards tip for surface filing. Size 100mm (4in) Cut : square smooth. ...

A small rectangular slender file with edges tapered to a point. Both faces double cut for locksmithing and other precision work. Size 100mm (4in) Cut : warding second. ...

Double cut teeth for filing slots, keyways, grooves, rectangular holes, internal corners and for fine-adjustment of cutting tools. Slightly tapered towards tip for surface filing. Size 150mm (6in) Cut : square bastard. Tanged....

Double cut teeth for filing slots, keyways, grooves, rectangular holes, internal corners and for fine-adjustment of cutting tools. Slightly tapered towards tip for surface filing. Size 150mm (6in) Cut : square second. Tanged.

Round needle files with surfaces taper to a point, double cut. For fine filing and polishing jobs. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths. Size : 16cm. Cut : 0 (bastard). Typ...

Triangular, surfaces taper to a point. Surfaces double cut. For fine filing and polishing jobs. Size : 14cm. Cut : 0 (bastard) Type : three square needle file. ...

For filing internal acute angles and cleaning out square corners. Double cut teeth with sharp edges. Size 150mm (6in) Cut : three square second. Tanged. ...

For filing internal acute angles and cleaning out square corners. Double cut teeth with sharp edges. Size 100mm (4in) Cut : three square smooth. Tanged. ...

For sharpening circular, felling and gang saws with fine toothing, also used on bandsaw. Excellent for draw and fine filing, polishing and deburring work. Often used in the engineering industry for lathe,deburring draw filing. Typ...

Set of 12 needle files in snapshut plastic wallet with hanging hole. One of each of the following : Hand, flat, half round, round, three square, square, crossing, knife, barrette, slitting, round edge joint and marking files, with han...

Single cut files to give fine/sharp finish to garden tools. Carbon chrome steel hardened and tempered with rust preventative finish and dipped in rust preventative oil. Self handled with hang hole. Manufactured in accordance with BS498 : 1990...

Hand Needle files with surface double cut, edges single cut, edges and surfaces parallel. For fine filing and polishing jobs. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths. Size : 14cm.

For filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work in high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both si...