For filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work in high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both si...

For filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work in high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both si...

Millsaw files have parallel surfaces with the edges tapering toward the point. Surfaces and edges are single cut - commonly referred to as mill bastard. This type of file is suitable both as an engineering file and a sharpening file. I...

Tapered half round cross section allows use on convex and concave surfaces. Suitable for deburring work. The edges and surfaces are tapered towards the point. 4in and 6in files are fully pointed, 8in and longer semi-pointed. Double cut...

For the same jobs as the hand file 100, but is sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel....

For the same jobs as the hand file 100, but is sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel....

Surfaces taper to a point, flat and convex surfaces double cut. For fine filing and polishing jobs. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths. Half round. Size : 16cm. Cut : 2 (smoot...

Double ended saw file for general purpose saw sharpening with both ends having second cut teeth. Single cut teeth on all sides. Fitted with an Ergo type handle. Size 180mm (7in). Side : 1/4in. ...

For the same jobs as the hand file 100, but is sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel....

Surfaces taper to a point, flat and convex surfaces double cut. For fine filing and polishing jobs. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths. Half round. Size : 14cm. Cut : 0 (basta...

For filing circular openings or concave surfaces. Tapered towards the point, 4in and 6in files are fully pointed, 8in and longer are semi-pointed. All double cut. Size : 200mm (8in) Cut : round second. With ergo grip handl...

No. 2 cut files, high carbon steel hardened and tempered with sand blasted finish. Two-tone soft-grip handles. Display packed in plastic storage wallet. Contents : flat parallel flat taper half round three square square and round files....

With one safe edge. Carbon chrome steel hardened and tempered with rust preventative finish and dipped in rust preventative oil. Manufactured in accordance with BS498 : 1990...

With one safe edge. Carbon chrome steel hardened and tempered with rust preventative finish and dipped in rust preventative oil. Manufactured in accordance with BS498 : 1990...

Carbon chrome steel hardened and tempered with rust preventative finish and dipped in rust preventative oil. Manufactured in accordance with BS498 : 1990...

Carbon chrome steel hardened and tempered with rust preventative finish and dipped in rust preventative oil. Manufactured in accordance with BS498 : 1990...

Carbon chrome steel hardened and tempered with rust preventative finish and dipped in rust preventative oil. Manufactured in accordance with BS498 : 1990...

Carbon chrome steel hardened and tempered with rust preventative finish and dipped in rust preventative oil. Manufactured in accordance with BS498 : 1990...

Carbon chrome steel hardened and tempered with rust preventative finish and dipped in rust preventative oil. Manufactured in accordance with BS498 : 1990...

Carbon chrome steel hardened and tempered with rust preventative finish and dipped in rust preventative oil. Manufactured in accordance with BS498 : 1990...