
89.95 £
The two bearings offer the means of cutting different depths of mouldings. Two bearings are supplied. For stationary machines - 16000 RPM recommended speed. Dimensions : Diameter : 63.5mm Cutting Length : 25.4mm Bearing Diameter : 1...

46.95 £
Self-guiding cutter with facility to change profile by fitting large bearing & varying the depth. Supplied with two bearings. Dimensions : Diameter : 29mm Cutting Length : 12.7mm Bearing Diameter : 9.5mm & 12.7mm Cutting Radius : 4m...

44.95 £
Self guided decorative bead ovolo supplied with two bearings. Larger bearing removes the quirk. Dimensions : Cutting Length : 16mm Bearing Diameter : 12.7mm & 16mm Cutting Radius 1 : 6.4mm Cutting Radius 2 : 4.8mm Shank Diameter : ...

44.95 £
Self guided decorative bead ovolo supplied with two bearings. Larger bearing removes the quirk. Dimensions : Cutting Length : 12.7mm Bearing Diameter : 9.5mm & 12.7mm Cutting Radius : 4mm Shank Diameter : 1/4 inch Please note...

65.95 £
Bearing guided for straight or curved work. For portable and stationary routers. Standard rebate 19.1mm. Fitted with two ball bearings. A variety of alloy bearing rings are available to give various rebate sizes. The bearing ring is se...

63.95 £
Popular rebate set which include different size bearings for a choice of rebates. Ease of setting-up and accurate depth of cut. Ideal for rebating straight and shaped work pieces. Has a 60mm shank to give access to deep rebates. When usin...

48.95 £
Popular rebate set which include different size bearings for a choice of rebates. Ease of setting-up and accurate depth of cut. Ideal for rebating straight and shaped work pieces. Is Ideal with delicate applications such as musical instrumen...

47.95 £
Self-guiding cutter with facility to change profile by fitting large bearing & varying the depth. Supplied with two bearings. Dimensions : Diameter : 34.9mm Cutting Length : 13.5mm Bearing Diameter : 9.5mm & 12.7mm Cutting Radius : ...

52.95 £
Supplied with one bearing. Dimensions : Diameter : 38mm Cutting Length : 14mm Bearing Diameter : 12.7mm Cutting Radius 1 : 3mm Cutting Radius 2 : 8mm Shank Diameter : 1/2 inch Please note that prices in the Trend Catalogue do...

48.95 £
Trend Double Overlap A=90í X 18mm Dia (Tct Router Cutter Range / Laminate Trimmers) Trimming top and bottom surfaces simultaneously with bearing following the board. Two fluted. Increased productivity. Dimensions : Diameter : 18m...

48.95 £
Trend B/Guided R'Over Queen Anne R42mm (Tct Router Cutter Range / Ovolo) Bearing guided rounding over cutter. Two passes can be made to make a shallow nosing on table tops. Dimensions : Diameter : 23.7 mm Cutting Length : 3/4 inch

42.95 £
Cutter supplied with two bearings. Larger bearing removes the quirk producing a round over profile. Dimensions : Diameter : 28mm Cutting Length : 12.7mm Bearing Diameter : 9.5mm & 12.7mm Cutting Radius : 7.9mm Shank Diameter : 8mm...

27.95 £
Profiler with shank mounted bearing for guidance. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should be le...

125.95 £
Cutter supplied with two bearings. Larger bearing removes the quirk producing a round over profile. For stationary machines - 12000 RPM recommended speed. Dimensions : Diameter : 89mm Cutting Length : 50.8mm Bearing Diameter : 9.5m...

29.95 £
Trend Trimmer A=90í X 20mm Dia (Tct Router Cutter Range / Laminate Trimmers) For trimming the lipping of plastic overlay, and for rebating and machining wood, Duralium and plastics. Tungsten Carbide Tipped. Use at speed 12000 - 2400...

19.95 £
Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges. Recess will require final trimming square with a hand chisel. Dimensions : Diameter : 12.7mm Cutting Length : 19mm Sha...

45.95 £
TCT cutter with staggered cutting surfaces. Deep mortising and grooving giving good chip clearance. For lock mortising, two width cuts will be needed to achieve the standard 19mm mortise. Will plunge and clear chips to a depth of 70mm in a n...

19.95 £
Cutter is designed to plunge and machine or mill lateral slots. Aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. For drilling and slotting, cutting aluminium anodised duralium an...

36.95 £
Cutter is designed to plunge and machine or mill lateral slots. Aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. With narrow neck for deep entry into second web of extrusions.

36.95 £
Cutter is designed to plunge and machine or mill lateral slots. Aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. With narrow neck for deep entry into second web of extrusions.