
8.95 £
Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Dimensions : IDiameter : 1/4 inch ODiameter : 14mm Thickness=3/16 inch Please note that prices in the Trend Catalogue download, if shown ...

8.95 £
Replacement bearing for router cutter. Always check the tightness of the fixing screw before using the cutter. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Dimensions : ...

8.95 £
Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Dimensions : IDiameter : 1/4 inch ODiameter : 15mm Thickness=3/16 inch Please note that prices in the Trend Catalogue download, if shown ...

3.95 £
Replacement bearing for router cutter. Always check the tightness of the fixing screw before using the cutter. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Dimensions : ...

6.95 £
Replacement bearing for router cutter. Always check the tightness of the fixing screw before using the cutter. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Dimensions : ...

6.95 £
Replacement bearing for router cutter. Always check the tightness of the fixing screw before using the cutter. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Dimensions : ...

8.95 £
Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Dimensions : IDiameter : 12.0mm ODiameter : 30.0mm Thickness=5.9mm Please note tha...

8.95 £
Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Dimensions : IDiameter : 12.0mm ODiameter : 34.0mm Thickness=11.0mm Please note th...

10.95 £
Replacement bearing for router cutter. Always check the tightness of the fixing screw before using the cutter. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Dimensions : ...

4.95 £
Replacement bearing for router cutter. Always check the tightness of the fixing screw before using the cutter. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Dimensions : ...

6.95 £
Replacement bearing for router cutter. Rubber shielded ball bearing give an improved protection from dust and dirt. Dimensions : IDiameter : 8mm ODiameter : 22mm Thickness=7mm Please note that prices in the Trend Catalogue down...

10.95 £
Always check the tightness of the fixing screw before using the cutter. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Dimensions : IDiameter : 8.0mm ODiameter : 29.0mm

14.95 £
Replacement bearing for router cutter. Delrin sleeve to protect Corian material. Dimensions : IDiameter : 15mm ODiameter : 28.6mm Thickness=9.0mm Please note that prices in the Trend Catalogue download, if shown below, may diff...

6.95 £
Replacement bearing for router cutter. Delrin sleeve to protect Corian material. Dimensions : IDiameter : 1/4 inch ODiameter : 21.0mm Thickness=6.8mm Please note that prices in the Trend Catalogue download, if shown below, may ...

6.95 £
Alternate bearing ring for the 46/390X1/2TC, giving a rebate size of 9.5mm. The bearing ring is secured to the cutter by fitting the ball bearing either side and tightening the screw. Dimensions : IDiameter : 12.7mm ODiameter : 31.7mm Rebat...

6.95 £
Alternate bearing ring for the 46/390X1/2TC, giving a rebate size of 6.35mm. The bearing ring is secured to the cutter by fitting the ball bearing either side and tightening the screw. Dimensions : IDiameter : 12.7mm ODiameter : 38.1mm Reba...

6.95 £
Alternate bearing ring for the 46/390X1/2TC, giving a rebate size of 4.75mm. The bearing ring is secured to the cutter by fitting the ball bearing either side and tightening the screw. Dimensions : IDiameter : 12.7mm ODiameter : 41.3mm Reba...

11.95 £
Two fluted Solid Carbide insert straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature.

7.95 £
Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature....

11.95 £
Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature....