
33.95 £
Cutter is designed to plunge and machine or mill lateral slots. Material should be securely clamped. For plastics only. Use at speed 10000 - 12000 RPM. Dimensions : Diameter : 5mm Cutting Length : 35mm Overall Length : 80mm S...

39.12 £
60 degree Taper Point with slow spiral is sometimes preferred for drilling end grain in wood. Ideal for fast drilling operations in open grained material. Not for use with routers and not suitable for masonry work. Has Solid Carbide ends, br...

14.95 £
Cutter for non-ferrous metals. For grooving and profiling. Coolants are required when machining aluminium, ie. wax, mist coolant or an air jet. Use at speed 10000 - 12000 RPM. Dimensions : Diameter : 6.3mm Cutting Length : 12.7mm

42.95 £
Trend Drill/C'Sink/C'Bore 3/16 Dia (Tct Drilling Tools / Drill/Coutersink/Counterbores) This specially designed machine bit has a new form of scriber to allow use at higher speeds. For recessing circular hinges. For accurate repetitive r...

48.95 £
Can be used with radius cutters, to make rule joints. Dimensions : Diameter : 31mm Cutting Length : 16mm Cutting Radius : 10mm Shank Diameter : 1/2 inch Please note that prices in the Trend Catalogue download, if shown below, may...

63.95 £
Can be used with radius cutters, to make rule joints. For stationary machines - 16000 RPM recommended speed. Dimensions : Diameter : 60mm Cutting Length : 27mm Cutting Radius : 20mm Shank Diameter : 1/2 inch Please note that p...

80.95 £
Especially designed for routing Corian, which is used in many bathrooms and kitchens. Has a 'Delrin' sleeve fitted to protect the workpiece. Dimensions : Diameter : 57mm Cutting Length : 32mm Bearing Diameter : 21.8mm Cutting Radiu...

42.95 £
Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters. Pin dia. 5.5mm. Dimensions : Cutting Length : 16.5mm Cutting Radius : 9.5mm Shank Diameter : 1/4 inch Please note that prices in the T...

34.95 £
Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters. Pin dia. 9mm. Dimensions : Cutting Length : 9.5mm Cutting Radius : 3.2mm Shank Diameter : 1/4 inch Please note that prices in the Tren...

37.95 £
Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters. Pin dia. 9mm Dimensions : Cutting Length : 15.8mm Cutting Radius : 9.5mm Shank Diameter : 3/8 inch Please note that prices in the Tren...

32.95 £
Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters. Pin dia. 4.5mm Dimensions : Cutting Length : 15.8mm Cutting Radius : 9.5mm Shank Diameter : 8mm Please note that prices in the Trend C...

45.95 £
Complete with guide bearing to reduce setting time for curved workpieces. Dimensions : Diameter : 20.7mm Bearing Diameter : 12.7mm Cutting Radius : 4mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue down...

46.95 £
For creating a concave radius or cove in the edge of furniture and columns. Dimensions : Diameter : 22.2mm Cutting Length : 25.4mm Bearing Diameter : 12.7mm Cutting Radius : 19.5mm Shank Diameter : 1/2 inch Please note that pri...

45.95 £
An elegant edge mould which gives a narrow appearance to a board edge. Dimensions : Diameter : 22mm Cutting Length : 10mm Cutting Radius : 3mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue download, if ...

68.95 £
An initial cut with a straight cutter is required to produce this effect. Apply in two passes from left & right to cut a protruding grip handle. Dimensions : Diameter : 19mm Cutting Length : 13mm Cutting Radius : 4mm Shank Diameter : ...

98.95 £
This Comb Jointing Set can be fitted to all heavy duty routers mounted in a fixed head position. It comprises a set of five 4mm kerf, three winged TCT groovers, mounted on an arbor, and three roller bearings. These offer alternative cutting de...

68.95 £
A large version of a classic moulding for glazing bars, also popular for table and dresser top edge finishes. Dimensions : Diameter : 36.3mm Diameter : 16mm Cutting Length : 33mm Cutting Radius : 20mm Shank Diameter : 1/2 inch ...

55.95 £
Self guiding Roman Ogee for freehand edging. Dimensions : Cutting Length : 16mm Cutting Radius : 6.3mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue download, if shown below, may differ to the website pri...

107.95 £
Designed for worktops and edges. For stationary machines - 16000 RPM recommended speed. Three wing cutter Dimensions : Diameter : 60.2mm Cutting Length : 50.8mm Cutting Radius : 19mm Shank Diameter : 1/2 inch Please note th...

60.95 £
Designed for worktops and edges. Dimensions : Diameter : 27mm Cutting Length : 30mm Cutting Radius : 8mm Shank Diameter : 1/2 inch Please note that prices in the Trend Catalogue download, if shown below, may differ to the website...