The classic method of producing cabinet panelled door and drawer fronts is made easy with the Profile Scriber set. The components are rearranged on the arbor to cut the profile or the scribe. For a range of complimentary panel mould cutters.

The classic method of producing cabinet panelled door and drawer fronts is made easy with the Profile Scriber set. The components are rearranged on the arbor to cut the profile or the scribe. For a range of complimentary panel mould cutters.

A unique product which allows access covers for pipes and cables to be installed beneath chipboard floors, using a router. Cuts only the thickness of the board. No waste - the piece cut out is used to make good the floor. Starter kit inclu...

Should be used in a standing drill press, mill, lathe or a CNC drilling machine. Dimensions : Rec. speeds : MDF 300 - 3,800RPM Hardwood 300 - 2,000RPM (straight & close grained) Please note that prices in the Trend Catalogue download...

Should be used in a standing drill press, mill, lathe or a CNC drilling machine. Dimensions : Rec. speeds : MDF 300 - 3,800RPM Hardwood 300 - 2,000RPM (straight & close grained) Please note that prices in the Trend Catalogue download...

Designed to mill slots in both plastic and non-ferrous metal. Aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. With M10 x 1.5 internal thread, for UPVC plastics and aluminium.

Designed to mill slots in both plastic and non-ferrous metal. Aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. With M10 x 1.5 internal thread, for UPVC plastics and aluminium.

Trend Rota-Tip A=65í X 24mm Dia (Tct Router Cutter Range / Rota Tip) Two replaceable Solid Carbide blades. For specialist applications requiring low down-time and economy of a replaceable tip. Blades can be rotated in 90 degrees increme...

One flute. Eccentric single flute cutter. Cutter is chosen for fast free cutting, when cutting speed takes preference over finish. Must not be used in eccentric chucks. Cutter is Solid Carbide. Greater durability. Better plunge char...

Cuts cleanly without feather edging. Solid Carbide for long life. Cuts to a fine ' V' groove point. Dimensions : Diameter : 14.5mm Cutting Length 1 : 12.5Cutting Length 2 : 14mm Angle : 60 degrees Shank Diameter : 1/4 inch

Solid coarse cut Carbide. Rasp/Burr. For grinding, carving and shaping of glass reinforced plastics (GRP). With twin roller bearings, is ideal for following a template but is not suitable for plunge cutting. Use at speed 10000 -30000 RPM.

For metal, GRP, plastic and wood. Carving, weld removal and drilling hole enlarging. Dimensions : Diameter : 6mm Cutting Length : 12mm Shank Diameter : 3mm Please note that prices in the Trend Catalogue download, if shown below,...

For metal, GRP, plastic and wood. Carving, weld removal and drilling hole enlarging. Dimensions : Diameter : 6mm Cutting Length : 12mm Shank Diameter : 3mm Please note that prices in the Trend Catalogue download, if shown below,...

For metal, GRP, plastic and wood. Carving, weld removal and drilling hole enlarging. Dimensions : Diameter : 10mm Cutting Length : 20mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue download, if shown ...

Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 5- 10m/min of 18000 - 24000 RPM. Ideal for hardwoods and abrasive material such as MDF, veneer finish and laminat...

Small diameter shank cutter for CNC routers. Used for specialised applications including signmaking and PCB machining. Dimensions : Diameter : 1.5mm Cutting Length : 5mm Overall Length : 38mm Shank Diameter : 3mm Please note t...

Small diameter shank cutter for CNC routers. Used for specialised applications including signmaking and PCB machining. Dimensions : Diameter : 5/64 inch Diameter : 2 mm Cutting Length : 15/64 inch Cutting Length : 6 mm Shank Diame...

Spare shim packs for adjusting profile scribe sets. Supplied in packs of 10, either 0.05mm or 0.1mm thick. Dimensions : OD = 16mm ID = 8mm THICKNESS = 0.1mm Please note that prices in the Trend Catalogue download, if shown be...

TCT two wing slotters with 1/4 inch bore. Ensure slotter is fitted the correct way onto the arbor with respect to the direction of rotation. Bearings and slotter should be fitted as near to the shank as possible to avoid vibration. Dimensio...

TCT two wing slotters with 1/4 inch bore. Ensure slotter is fitted the correct way onto the arbor with respect to the direction of rotation. Bearings and slotter should be fitted as near to the shank as possible to avoid vibration. Dimen...