12.95 £
Two fluted Solid Carbide insert straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature.
9.95 £
Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature....
11.95 £
Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature....
11.95 £
Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature....
11.95 £
Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature....
10.95 £
Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature....
12.95 £
Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature....
13.95 £
Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature....
13.95 £
Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature....
13.95 £
Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature....
13.95 £
Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature....
9.95 £
Single fluted Tungsten Carbide straight cutter for fast free cutting. This cutters has extra clearance and gives a stronger backing support to the tip. Single flute should be chosen where speed and clearance rates are more important than the f...
9.95 £
Single fluted Tungsten Carbide straight cutter for fast free cutting. This cutters has extra clearance and gives a stronger backing support to the tip. Single flute should be chosen where speed and clearance rates are more important than the f...
13.95 £
This dovetail cutter produces a tight reliable joint for drawers, boxes etc. Dimensions : Diameter : 12.7mm Cutting Length : 12.7mm Overall Length : 46mm Angle : 104 degrees Shank Diameter : 1/4 inch Please note that prices in ...
22.95 £
This cutter is self-guiding & can be used to produce rebates, lap joints, tongues & rebated corners. Alternative bearings can be purchased to vary the rebate. 9.5mm now included. Larger bearings B22A & B25A can also be used. Dimensio...
25.95 £
Self-guiding chamfer/bevel cutter. Bearing follows the board beneath. Dimensions : Cutting Length : 12.7mm Bearing Diameter : 9.5mm Angle : 45 degrees Shank Diameter : 1/2 inch Please note that prices in the Trend Catalogue do...
22.95 £
This cove style cutter with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of passes. Dimensions : Diameter : 25.4mm Cutting Length : 15.9mm Cutting Radius : 12.7mm ...
32.95 £
Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with. The guide bearing follows the vertical edge or template. Dimensions : Cutting Length : 14.3mm Bearing Diameter : 9.5mm Cutting Radius : 9.5mm
25.95 £
Self-guiding cutter for rounding over edges, without the need for a side fence. If cutter is lowered, a top quirk can be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. D...
32.95 £
Self-guiding cutter for rounding over edges, without the need for a side fence. If cutter is lowered, a top quirk can be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. D...
