Self-guiding cutter for producing ovolo mouldings, without the need for a side fence. Top quirk can be removed by raising the cutter. Dimensions : Cutting Length : 15.9mm Bearing Diameter : 9.5mm Cutting Radius : 9.5mm Shank Diamete...

Self-guiding cutter for producing ovolo mouldings, without the need for a side fence. Top quirk can be removed by raising the cutter. Dimensions : Cutting Length : 19.1mm Bearing Diameter : 9.5mm Cutting Radius : 12.7mm Shank Diamet...

Self-guiding cutter for producing ovolo mouldings, without the need for a side fence. Top quirk can be removed by raising the cutter. Dimensions : Cutting Length : 19.1mm Bearing Diameter : 9.5mm Cutting Radius : 12.7mm Shank Diamet...

By raising the cutter, the top quirk is removed. Dimensions : Cutting Length : 15.9mm Bearing Diameter : 9.5mm Cutting Radius : 4mm Shank Diameter : 1/2 inch Please note that prices in the Trend Catalogue download, if shown below...

A small beading cutter for fine decorative panelling, veining or rounding over. Dimensions : Diameter : 9.5mm Cutting Length : 7.9mm Cutting Radius : 3.2mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue ...

A self guiding flat ovolo to give a smooth corner finish. Alternatively, can be used to produce glazing bar profiles. Dimensions : Cutting Length : 11mm Bearing Diameter : 9.5mm Rebate : 10.2mm Cutting Radius : 12mm Shank Diameter...

Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Raise cutter in stages to spread wear of cutting edges. Dimensions : Diameter : 15.9mm Cutting Length : 15.9mm Bearing Diameter : 15.9mm Shan...

This trimmer with a shank mounted bearing, are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cutter breakage. Dimensions : Diameter : 19.1mm Cutting Length : 25.4mm Shank D...

For producing ovolo and rounding over edge moulds, using a side fence or back fence. Dimensions : Diameter : 12.7mm Cutting Length : 9mm Cutting Radius : 4.8mm Shank Diameter : 8mm Please note that prices in the Trend Catalogue d...

Self-guiding chamfer/bevel cutter. Bearing follows the board beneath. Dimensions : Cutting Length : 7mm Bearing Diameter : 9.5mm Angle : 30 degrees Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue downl...

Should be used with a router of minimum power rating of 750 watts. It should be fitted in a router table which has an adjustable backfence and a mitre fence or workholding jig attachment. For use in a router table only Timber thickness are M...

For use in a router table only. Take 3 - 4 passes at repeated depths. Can be used for curved panels if a copy pin is used. Dimensions : Diameter : 41mm D2=7mm Cutting Length : 7mm Cutting Radius : 12mm Shank Diameter : 8mm

Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature....

Should be used with a router of minimum power rating of 750 watts. It should be fitted in a router table which has an adjustable backfence and a mitre fence or workholding jig attachment. For use in a router table only Timber thickness are M...

A one piece set. Parts are inter-changed on the arbor to alter the set-up. For use with router table only. Timber thickness are Min. = 15mm and Max. = 18mm. Dimensions : Diameter : 41 mm Bearing Diameter : 22 mm Shank Diameter : ...

This dovetail cutter produces a tight reliable joint for drawers, boxes etc. For use with Elu/Dewalt & Titan (11mm comb). Use with GB108. Dimensions : Diameter : 14.3 mm Cutting Length : 12.7 mm Overall Length : 52 mm Angle : 104 ...

Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature....

Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Raise cutter in stages to spread wear of cutting edges Dimensions : Diameter : 6.35mm Cutting Length : 12.7mm Shank Diameter : 1/4 inch Plea...

Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Raise cutter in stages to spread wear of cutting edges. Dimensions : Diameter : 6.35mm Cutting Length : 25.4mm Shank Diameter : 1/4 inch Ple...

Used for cutters with shank mounted bearings. Pack includes one collar, grub screw and hex key. Dimensions : IDiameter : 8mm ODiameter : 14mm Hex key 5/64 inch Please note that prices in the Trend Catalogue download, if shown b...