Bearing guided classic style cutter. Supplied with two bearings. Dimensions : Diameter : 32mm Cutting Length : 12.7mm Bearing Diameter : 12.7mm & 16mm Cutting Radius : 5mm Shank Diameter : 1/4 inch Please note that prices in...

The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded. Dimensions : Diameter : 27mm Cutting Length : 17mm Bearing Diameter : 9.5mm Cutting Radius : 17mm Shank Diameter : 1/2 inch

Profiler with shank mounted bearing for guidance. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should be le...

Profiler with shank mounted bearing for guidance. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should b...

Cutter supplied with two bearings. Larger bearing removes the quirk producing a round over profile. Dimensions : Diameter : 28mm Cutting Length : 12.7mm Bearing Diameter : 9.5mm & 12.7mm Cutting Radius : 7.9mm Shank Diameter : 1/4...

Trend Combi Trimmer A=45íX21mm Dia 253361 (Tct Router Cutter Range / Laminate Trimmers) Cutter for trimming and bevelling timber, lippings and plastic laminate. Can only be used in laminate trimming routers, or when straight fence guides ar...

Designed to countersink slots in both plastic and non-ferrous metal. Material should be securely clamped. This countersink is produced in HSS and should not be confused with carbon steel types. Designed for countersinking mild steel, iron a...

TCT cutter with staggered cutting surfaces. Deep mortising and grooving giving good chip clearance. For lock mortising, two width cuts will be needed to achieve the standard 19mm mortise. Dimensions : Diameter : 12.7mm Cutting Length...

Cutter is designed to plunge and machine or mill lateral slots. Aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. For drilling and slotting, cutting aluminium anodised duralium an...

Cutter is designed to plunge and machine or mill lateral slots. Aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. For drilling and slotting, cutting aluminium anodised duralium an...

Cutter is designed to plunge and machine or mill lateral slots. Material should be securely clamped. For drilling and slotting, cutting aluminium anodised duralium and UPVC. Ideal for recessing and slotting extrusions. HSSE is a specia...

Cutter is designed to plunge and machine or mill lateral slots. Aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. For drilling and slotting, cutting aluminium anodised duralium an...

Cutter is designed to plunge and machine or mill lateral slots. Aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. With narrow neck for deep entry into second web of extrusions.

Cutter is designed to plunge and machine or mill lateral slots. Normal neck, but long shank. Use at speed 10000 - 12000 RPM. Dimensions : Diameter : 4mm Cutting Length : 40mm Overall Length : 100mm Shank Diameter : 8mm Ple...

Cutter is designed to plunge and machine or mill lateral slots. Material should be securely clamped. For plastics only. Use at speed 10000 - 12000 RPM. Dimensions : Diameter : 6mm Cutting Length : 48mm Overall Length : 90mm S...

60 degree Taper Point with slow spiral is sometimes preferred for drilling end grain in wood. Ideal for fast drilling operations in open grained material. Not for use with routers and not suitable for masonry work. Dimensions : Diamet...

Tungsten Carbide Tipped. Two flute cutter with a positive shear angle (down-cut) for fast cutting and fine finish. Ideal for grooving & trimming veneer finishes & laminated boards. Down cut feature stops break out on top edge. Dimensi...

Trend Drill/C'Sink/C'Bore 7/32 253363 (Tct Drilling Tools / Drill/Coutersink/Counterbores) This specially designed machine bit has a new form of scriber to allow use at higher speeds. For recessing circular hinges. For accurate repetitiv...

Trend Drill/C'Sink/C'Bore 1/4 Dia (Tct Drilling Tools / Drill/Coutersink/Counterbores) This specially designed machine bit has a new form of scriber to allow use at higher speeds. For recessing circular hinges. For accurate repetitive ro...

Trend Multi-Boring C'Bore Set 10mm Dia (Tct Drilling Tools / Multi Borer /Countersink) Features a TC tipped 60 degree taper slow spiral drill, as standard. Two TC scribers to ensure a clean entry with helical fluting to remove chips. Car...