TCT four wing slotters with 1/4 inch bore. Ensure slotter is fitted the correct way onto the arbor with respect to the direction of rotation. Bearings and slotter should be fitted as near to the shank as possible to avoid vibration. Dim...

Ensure slotter is fitted the correct way onto the arbor with respect to the direction of rotation. Bearings and slotter should be fitted as near to the shank as possible to avoid vibration. This slotter has a M12 threaded boss to enable it to...

Ensure slotter is fitted the correct way onto the arbor with respect to the direction of rotation. Bearings and slotter should be fitted as near to the shank as possible to avoid vibration. This slotter has a M12 threaded boss to enable it to...

Ensure slotter is fitted the correct way onto the arbor with respect to the direction of rotation. Bearings and slotter should be fitted as near to the shank as possible to avoid vibration. This slotter has a M12 threaded boss to enable it to ...

Ensure slotter is fitted the correct way onto the arbor with respect to the direction of rotation. Bearings and slotter should be fitted as near to the shank as possible to avoid vibration. This slotter has a 12mm clear bore. Can be mount...

TCT three wing slotter with 1/4 inch bore Ensure slotter is fitted the correct way onto the arbor with respect to the direction of rotation. Bearings and slotter should be fitted as near to the shank as possible to avoid vibration. Dime...

A keyhole recess for picture hanging flush to the wall. No.8 and No.10 screw heads. Not suitable for grooving applications. Dimensions : Diameter : 9.5mm Diameter : 4.5mm Cutting Length : 4.5mm S=5.5mm Shank Diameter : 8mm

Ideal for hiding pipes and cables. Part of curve can be used for producing decorative edges. An initial slot is required before using the ball groovers. Dimensions : Diameter : 32mm Diameter : 12.7mm Shank Diameter : 1/2 inch

Recessing cutter for producing double rebates. For producing recesses with a lower rebate. Designed to accept library/bookcase strip (Tonk Strip). Dimensions : Diameter : 16mm Diameter : 22mm Cutting Length 1 : 10mm Cutting Length 2...

Trend Trimmer A=90í X 25mm Dia (Tct Router Cutter Range / Laminate Trimmers) Has three flutes, and has bevelled corners to prevent scoring, and is for flush trimming of hardwood or plastic edge strip. Dimensions : Diameter : 25mm Cu...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 35/64 inch Diameter : 14mm Cutting Length : 25mm...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 1 inch Diameter : 25.4mm Cutting Length : 19mm

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 1 1/2 inch Diameter : 38.1mm Cutting Length : 25...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 45/64 inch Diameter : 18mm Cutting Length : 25mm...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 23/32 inch Diameter : 18.2mm Cutting Length : 32...

Two flutes for clean finish. Suitable for plunge routers. Dimensions : Diameter : 3/4 inch Diameter : 19mm Cutting Length : 25mm Shank Diameter : 1/2 inch Please note that prices in the Trend Catalogue download, if shown below...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 53/64 inch Diameter : 21mm Cutting Length : 19mm...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 53/64 inch Diameter : 21mm Cutting Length : 19mm...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 7/8 inch Diameter : 22.2mm Cutting Length : 31mm...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 1 3/16 inch Diameter : 30mm Cutting Length : 25m...