
44.95 £
For coves and part of a rule joint. Two flute. Dimensions : Diameter : 20mm Cutting Length : 18mm Cutting Radius : 10mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue download, if shown below, may di...

25.95 £
Complete with one bearing. Dimensions : Diameter : 12.7mm Cutting Length : 9.5mm Bearing Diameter : 12.7mm Cutting Radius : 6.35mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue download, if shown belo...

38.95 £
Tungsten Carbide Tipped. Two flute cutter with tip sheared up and down, giving a fine finish. For trimming veneered and double-faced boards, plywoods and natural timbers. Action of pushing the chips towards the middle of the board being cut....

89.95 £
Ideal for fluting spindles and other decorative turned work. Has a small flat ground on the nose that produces a very fine cut. Suitable for routing false panel mouldings and engraving work. Dimensions : Diameter : 41.5mm Cutting Le...

71.95 £
Trend Panel/Bevel A=10í X 50mm Dia (Tct Router Cutter Range / Panel Mould Raised) This Raised Panel cutter runs best at lower speeds between 12,000 and 18,000 RPM. Matches our range of profile scribers. Suitable for use on natural timbe...

41.95 £
Decorative classic panel mould cutter for raised panelling or edge moulding. Dimensions : Diameter : 12mm Cutting Length : 7mm Cutting Radius 1 : 2mm Cutting Radius 2 : 4mm Shank Diameter : 1/4 inch Please note that prices in t...

47.95 £
Decorative classic panel mould cutter for raised panelling or edge moulding. Dimensions : Diameter : 25.4mm Cutting Length : 16mm Cutting Radius 1 : 5mm Cutting Radius 2 : 7mm Shank Diameter : 1/2 inch Please note that prices i...

56.95 £
Ideal for following templates for panelling and profiling in furniture manufacture. It is advisable that the template is at least 5mm thicker than the cut length of the cutter. Complete with one bearing. Dimensions : Diameter : 35mm ...

80.95 £
This cutter is available in set Refs. PDS/1X1/2TC & PDS/2X1/2TC. For stationary machines or portable routers mounted in a table at 16000 RPM recommended speed. Dimensions : Diameter : 67mm Cutting Length : 16mm Bearing Diameter : 12.7...

65.95 £
Shape approximately equivalent to Ref. 18/82X1/2TC. Suitable panel mould for use with Ref. PSC/3X1/2TC & PSC/30X1/2TC. Ideal for use when no variable speed facility is available or when shaped work is not required. When used in a portable m...

51.95 £
Decorative ogee cutter for finishing furniture tops. Dimensions : Diameter : 27mm Diameter : 8mm Cutting Length : 16mm Cutting Radius : 4.7mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue download, if...

20.95 £
One flute. Eccentric single flute cutter. Cutter is chosen for fast free cutting, when cutting speed takes preference over finish. Must not be used in eccentric chucks. Dimensions : Diameter : 1/4 inch Diameter : 6.3mm Cutting L...

8.95 £
Single flute cutter with an extra long shank. Deep grooving, rebating and mortising. Useful for template work when thickness of template restricts depth. Extra care must be taken to avoid breakage. Take more passes than usual, and only c...

26.95 £
One flute. Eccentric single flute cutter. Cutter is chosen for fast free cutting, when cutting speed takes preference over finish. Must not be used in eccentric chucks. Dimensions : Diameter : 1/4 inch Diameter : 6.3mm Cutting L...

25.95 £
One flute. Eccentric single flute cutter. Cutter is chosen for fast free cutting, when cutting speed takes preference over finish. Must not be used in eccentric chucks. This cutter has a Solid Carbide insert rather than brazed tip.

59.95 £
This cutter simplifies the construction of framing. The scriber matches the ogee 20/2X1/4TC to form a corner joint. Tenon and groove/rebate must be cut separately. Dimensions : Diameter : 25mm Cutting Length : 12mm Cutting Radius : ...

56.95 £
Decorative cavetto mould cutter for raised panelling or edge moulding. Dimensions : Diameter : 25mm Cutting Length : 16mm Cutting Radius : 11mm Shank Diameter : 1/2 inch Please note that prices in the Trend Catalogue download, if...

62.95 £
An interesting and attractive mould with a unique wavy effect, using chords of the radius. Dimensions : Diameter : 32mm Cutting Length : 18mm Bearing Diameter : 12.7mm Cutting Radius : 4mm Shank Diameter : 1/2 inch Please note ...

30.95 £
Collet Set 1/4 1/4 inch collet and nut. Bosch GOF900 , GOF900A , GOF900ACE , GOF900 CE , POF 800ACE , POF1100AE , POF1200AE , POF 1300ACE , POF1400ACE Please note that prices in the Trend Catalogue download, if shown below, may ...

11.95 £
Trend Collet New Type 8mm (Collets / 8mm) 8mm collet capacity. Dimensions : Bosch PKF25, POF52, POF400, POF500A, POF600ACE Please note that prices in the Trend Catalogue download, if shown below, may differ to the website pri...